Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Construction in Sausalito, CA | San Bernardino Contractors
We provide independent Cambria quartz fabrication and installation across Sausalito, from hillside kitchens off Bridgeway to floating homes in the marina. The thing that separates our Cambria work here from a flat-land install is simple: this stone gets templated differently when the floor beneath it moves. If you’re planning a Cambria countertop, island, or full kitchen in Sausalito, call (855) 473-5620 and we’ll walk you through what your specific home actually needs.
Why Sausalito Residents Choose Us for Cambria Service
Cambria is one of the stones we know cold. We work with Brittanicca, Ella, Torquay, and Swanbridge regularly, and we understand how each one behaves under a router, at a seam, and under load. Ruben Castillo grew up learning framing and finish work from his uncle, then sharpened that into formal construction training at San Bernardino Valley College, where he got serious about load paths and not cutting structural corners. We’ve brought that same discipline to every Cambria job we’ve templated in Sausalito. We’re an independent installer and work through our broader Cambria sales & service arm, not a factory-authorized shop. That independence means we’re free to tell you when a slab can be saved and when it can’t, and to rebuild the cabinet boxes under it rather than gluing stone over rot. When we work in Sausalito, we’re thinking about marine moisture, slope movement, and deck deflection from the first site visit, not discovering it halfway through the install.
Styles & brands we work with







Common Cambria Construction Problems We Solve in Sausalito
- Seam separation above cantilevered decks. Sausalito kitchens often sit on decks that hang over the hillside. Foot traffic flexes the floor plane, and a seam that held at install will open a hairline within a season or two. We re-templated more than one Brittanicca island after the original installer took measurements on an unloaded deck.
- Cracks at sink and cooktop cutouts. Cambria is hard and brittle. When a hillside lot settles or slope creep racks a cabinet box out of level, the slab telegraphs that movement and cracks at the weakest point, which is always a cutout. We pull the top, sister and shim the base, and re-set before a new crack forms.
- Corroded fasteners and swollen substrate under a good slab. Salt air off the bay eats standard cabinet fasteners, and fog-belt moisture does the rest. The quartz stays fine. The wood underneath doesn’t. We’ve removed Cambria tops that were perfectly intact sitting on cabinet boxes we could crumble with a screwdriver.
- Underside discoloration at seams. Trapped condensation behind cabinetry in a wet, foggy Sausalito kitchen swells the box and pushes the seam, darkening the underside edge of the slab. It’s cosmetic at first, then structural if the swell keeps spreading.
- Seam adhesive failure on floating homes. Floating homes in the marina move constantly, seasonally, and sometimes hourly with tide and wake. Bargain two-part epoxy doesn’t flex enough and fails. We use Cambria-spec or equal silicone seam adhesive on every Sausalito install, including grade-level cuts.
Cambria Service in Sausalito: What Local Conditions Mean for Your Equipment
Here’s the thing flat-land pages won’t tell you. Because so many Sausalito hillside kitchens open onto cantilevered view decks where the floor plane deflects under foot traffic, a Cambria template taken at rest can be wrong by the time a full island is installed. The laser reads level on a Wednesday afternoon. The family has people over on Saturday, the deck deflects an eighth of an inch, and suddenly the island top is carrying weight unevenly. So we re-check level with the deck loaded, meaning we have someone walk the traffic path while the laser is running, then shim or sister the cabinet base before cutting. A Mill Valley install on a slab-on-grade lot never needs that step. A Sausalito install off Bridgeway almost always does. It’s the difference between a seam that holds through two wet winters and one that opens by spring.
Cambria Models & Products We Service in Sausalito
We fabricate and install the full residential Cambria line you’ll actually find in Sausalito kitchens: Brittanicca and Brittanicca Warm, Ella, Torquay, and Swanbridge, plus the broader Cambria quartz catalog by order. When it comes to seams, we use Cambria-spec silicone adhesive and flexible epoxy, not the cheap two-part stuff that turns brittle in Sausalito’s damp cycles. We stock standard seam kits and cabinet-shimming materials for fast turnaround, but every slab is ordered per job and cut to template. We also handle the surrounding work a Cambria top depends on: cabinet installation and refacing, kitchen island installation, backsplash, and plumbing fixture setting for sinks and cooktops.
See the difference
Before
After
Before
After
Before
AfterCambria Service Pricing in Sausalito
| Service | Typical Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Backsplash Installation | $800 – $2,500 |
A free estimate includes a site visit to check deck deflection, cabinet box condition, and seam placement before we ever quote a number. Call (855) 473-5620 for an exact figure on your Sausalito kitchen.
Serving Sausalito, CA — Our Local Coverage Area
We’re based in the Sausalito area and work with a Sausalito General Contractor who knows this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Cambria Construction in Sausalito
Can a Cambria island be installed in a Sausalito hillside kitchen on a cantilevered deck floor?
Yes, it can, but it should not be templated like a slab-on-grade kitchen. We check level with the deck under load, then shim or sister the cabinet base before cutting so the slab has a stable, supported plane underneath. Call (855) 473-5620 and we’ll send someone to look at your specific floor.
Does salt air actually shorten the life of Cambria countertops?
Salt air doesn’t attack the quartz itself, but it destroys the fasteners and cabinet hardware under the slab, and that failure reads through the stone as open seams and cracks at cutouts. In Sausalito, the supporting structure usually fails before the Cambria does. We rebuild the substrate with corrosion-resistant fasteners when we re-set a top. For a quick assessment of your cabinets, call (855) 473-5620.
How do you template a Cambria counter in a floating home at the Sausalito marina?
We template with an eye to constant movement. Seam adhesive has to flex, and cutouts need extra clearance around sink and cooktop edges because the floor will shift seasonally with tide and wake. We use Cambria-spec silicone seam adhesive on every floating-home job. Quotes are free, so call (855) 473-5620 to get yours started.
Can we crane a Cambria slab to a kitchen that a truck can’t reach?
We’ve done crane lifts on steep Sausalito streets where the flatbed can’t get close, carrying full slabs over rooftops to reach a hillside kitchen. It adds to the job cost, but it’s the only way some of these Bridgeway-adjacent lots get done. We’ll assess access on the first site visit. Call (855) 473-5620 to schedule yours.
Will a new Cambria top fix cabinet problems in an older Sausalito cottage?
No. If the cabinet boxes are racked, softened by moisture, or sitting on a deflecting cantilever, a new slab will telegraph every one of those problems and eventually crack. We fix the cabinet base first, then set the stone. If you’re not sure which problem you have, call (855) 473-5620 and we’ll tell you honestly before any money changes hands.
Service Areas Near Sausalito
We work throughout the Sausalito service area, mainly in 94965 and 94966, and regularly take Cambria jobs in Marin City, Mill Valley, Corte Madera, and Tiburon. Our broader Sausalito service area coverage means we can often bundle a hillside kitchen estimate with other work on the same property. We also run Cambria service in Marin City from the same crew, and for clients with properties further out, we handle Cambria service in Fontana through our southern California team.
Book Your Cambria Service in Sausalito Today
We re-templated a fog-belt cottage off the streets climbing toward the Golden Gate view after the original Brittanicca island cracked along a seam above a cantilevered deck. The deck framing deflected under load, the cabinet boxes had racked out of level, and the original seam sat right in the traffic path. We sistered the base, re-shimmed, re-templated with a fresh seam off the load line, and that replacement has held through two wet winters. If it’s not built right the first time, you’re just paying for it twice. Call (855) 473-5620 to schedule your free Cambria estimate in Sausalito.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Sausalito and the Bay Area hillside communities.