Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Las Lomas, CA | San Bernardino Contractors
We handle CGI cabinetry, countertop, and finish work throughout Las Lomas as an independent contractor. The one thing that makes our CGI work different out here is that we plan every job around what Las Lomas actually throws at a kitchen: fog-season humidity, clay-heavy soil, and unincorporated-county permitting instead of a city building desk. If you’re researching CGI sales & service, call (855) 473-5620 and we’ll walk you through what works here and what doesn’t. Ruben Castillo runs our Las Lomas service area coverage, and he’s spent enough time on slough-side lots to know the difference between a cabinet problem and a moisture problem.
Why Las Lomas Residents Choose Us for CGI Service
CGI boxes and doors are everywhere in the Pajaro Valley, so we know how they behave after ten or fifteen years in coastal air. Our crew works on CGI Ready-to-Assemble all-plywood boxes, Euro-style melamine and thermofoil door fronts, and Shaker and raised-panel solid-wood doors every month in Las Lomas homes. We’re an independent Las Lomas service area contractor, not an authorized CGI dealer. That means we call failures the way we see them, and we pair OEM hinges, slides, and replacement doors with quality aftermarket soft-close hardware when the original line is discontinued. Ruben’s rule applies to every job on our board: if it’s not built right the first time, you’re just paying for it twice. In Las Lomas that usually means addressing the water and the soil movement before we ever pick up a driver.
Styles & brands we work with
Common CGI Construction Problems We Solve in Las Lomas
These are the five calls we answer most often from Las Lomas homeowners with our Home Remodeling in Las Lomas CGI kitchens:
- Thermofoil and laminate door skins blistering at the bottom edges. Winter fog and rain push kitchen-floor humidity high, and when a range hood isn’t vented properly, that damp air settles right at the door line. We see this constantly on older rural homes with recirculating hoods installed in the 1980s and 1990s.
- Particleboard-core boxes swelling and crumbling at the toe kick. Many original Las Lomas houses sit on slab-on-grade foundations with no vapor barrier underneath. The slab wicks moisture up into the cabinet base, and particleboard acts like a sponge. Once that carcass swells, it’s done.
- Soft-close hinges and drawer slides loosening and sagging. Mid-century walls in Las Lomas are rarely plumb, and when a CGI RTA cabinet gets hung without shims and blocking, the hardware takes torque it wasn’t designed for. The fix is re-hanging with proper blocking, not just cranking screws tighter.
- Quartz and granite tops cracking at sink cutouts. Seasonal clay-soil movement racks floors on slough-adjacent parcels. If the base cabinets were never leveled and anchored to the wall, the countertop flexes with the floor and stress concentrates at the narrowest point of the stone.
- Drawer fronts delaminating on older CGI runs. The original box may be fine but the door skins have peeled. If the carcass is all-plywood, we can reface and save the run. If it’s particleboard, we say so plainly and recommend replacement.
CGI Service in Las Lomas: What Local Conditions Mean for Your Equipment
Here’s the thing most CGI guides will never tell you: Las Lomas is unincorporated Santa Cruz County, which means there’s no city building department to walk a permit through. A CGI kitchen or addition goes to county plan review, and on the clay-heavy parcels near the Pajaro River sloughs, that review process checks well and septic separation before anything gets built. We confirm that separation before we touch a wall, because a failed septic line under a new kitchen means tearing out the cabinets we just hung. An incorporated-city crew from Watsonville would never think to check, because city sewer is a given. If you need CGI repair in Corralitos, similar county rules apply. Out here it isn’t, and that changes the order of operations on every job. Clay soil near the sloughs also means seasonal shrink-swell that racks floors and tests every cabinet anchor we set, so we level, shim, and fasten boxes to wall studs on every Las Lomas install regardless of what the existing run looked like.
CGI Models & Products We Service in Las Lomas
We work on the full CGI residential lineup: Ready-to-Assemble all-plywood cabinet boxes, Euro-style melamine and thermofoil door fronts, Shaker and raised-panel solid-wood door styles, and CGI’s quartz and granite countertop programs. On the parts side, we keep OEM hinges, slides, and replacement doors in stock for active CGI runs throughout the Pajaro Valley. When a line is discontinued, we pivot to aftermarket soft-close hardware that matches the existing bore pattern and overlay. For Las Lomas homeowners, that means most Amesti CGI service repair parts are already local, not on a two-week truck from a distributor. If you’re comparing CGI cabinets against what else is available, we can lay out the difference between thermofoil, melamine, and solid-wood fronts in about ten minutes over the phone.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Las Lomas
Pricing for CGI work in Las Lomas tracks the same ranges we quote across the Inland Empire, with the unincorporated-county permitting piece occasionally adding modest plan-review time. What drives the final number is whether we’re refacing a healthy all-plywood run or replacing swollen particleboard boxes, plus the countertop material and edge profile you choose. Here’s where the common scopes land:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
A free estimate from us includes measuring, a condition check on the existing boxes, and a written line-item quote. Call (855) 473-5620 to schedule yours.
Serving Las Lomas, CA — Our Local Coverage Area
We’re a Las Lomas General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Las Lomas
No. We’re an independent contractor based in San Bernardino and serving Las Lomas, so we install and service CGI products on their merits, not because a manufacturer told us to. We’re not authorized, sponsored, or endorsed by CGI. That independence means we recommend the right fix for your kitchen even when the right fix is replacing a failed CGI run rather than refacing it.
Yes, for most active CGI runs we source OEM hinges, slides, and replacement doors, and we keep common hardware stocked for faster Las Lomas turnaround. When a line is discontinued, we switch to quality aftermarket soft-close hardware that matches the bore pattern and overlay. Call (855) 473-5620 with your cabinet model and we can tell you what’s still available.
Most refacing and hardware repair jobs finish in one to three working days once parts are on hand. Full kitchen replacements run two to six weeks depending on countertop fabrication and whether county plan review has questions. On slough-side parcels where we’re confirming well and septic separation, that check happens before demolition starts so it doesn’t hold up your kitchen.
Yes, if the carcass is all-plywood. We replace the affected doors and drawer fronts with matching or compatible CGI styles, and we address the moisture source so the new skins don’t peel in two years. If the boxes are particleboard and swollen, we tell you straight: refacing is money spent on a failed structure. Call (855) 473-5620 for an honest condition assessment.
Most Las Lomas kitchens land between $14,000 and $45,000 depending on cabinet line, countertop material, and whether any structural or plumbing work comes up. Cabinet-only refacing runs $4,000 to $13,000, and quartz or granite tops run $2,000 to $6,500. Estimates are free, and they include a written quote. Call (855) 473-5620 to get exact numbers for your kitchen.
Service Areas Near Las Lomas
We serve Las Lomas and the surrounding Pajaro Valley corridor, including CGI service in Pajaro just to the south and CGI service in Watsonville across the river. Crews also cover jobs in the North Monterey County side of the valley and up into the Santa Cruz County foothills where the same fog and clay conditions apply.
Book Your CGI Service in Las Lomas Today
We know the boxes, the doors, the countertops, and the unincorporated-county realities that shape a CGI job in Las Lomas. Bring us your kitchen and we’ll give you a straight answer and a free written estimate. Call (855) 473-5620 and ask for Ruben.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Las Lomas with independent CGI service and whole-home remodeling.