Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Fontana, CA | San Bernardino Contractors
We provide independent ES Windows construction and repair service across Fontana, from the 1950s steel-mill tract homes near downtown to the newer master-planned subdivisions north of the 210. What makes our ES Windows work different here is simple: we know how these specific window units fail in Fontana’s sustained triple-digit heat and Santa Ana wind, and we fix what’s actually broken rather than selling you a tear-out you don’t need. If you’re dealing with fogged glass, sticking sliders, or dust blowing through closed windows, call San Bernardino Contractors at (855) 473-5620 for a straight diagnosis and a free estimate.
Why Fontana Residents Choose Us for ES Windows Service
Ruben Castillo, our owner, grew up in the Westside neighborhood of San Bernardino watching his uncle reroof houses and frame garages on a tight budget. That hands-on education, plus his construction technology training at San Bernardino Valley College, taught him something you can’t learn from a brochure: a window is only as good as the rough opening it sits in and the flashing that keeps water out. We carry that same discipline to every ES Windows job in Fontana, whether it’s a single sagging slider in a Rancho Fontana rancher or a whole-house window package in a Southridge two-story.
We’re an independent contractor, not an authorized ES Windows dealer. That independence matters because we diagnose what’s actually failing, a cooked glazing seal, a flat-spotted roller, a gapped weatherstrip, and fix that. Our ES Windows sales & service work spans repairs, retrofits, and full replacements, always with parts matched to the unit rather than whatever’s cheapest on the shelf.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Fontana
- Fogged or milky glass on ES Windows 2000/3000 Series units. Fontana’s summer heat peaks above 100°F for weeks at a time, and that sustained thermal cycling eventually cooks the glazing seals on older vinyl units. Once the seal fails, moisture gets between the panes and you’re looking through a permanent haze. We replace the failed sash with OEM ES Windows glazing where available.
- Santa Ana dust infiltration through gapped weatherstripping. When fall winds kick up, fine valley dust finds every gap in an ES Windows slider’s sweep seal. We see this most often on 1980s and 1990s tract homes where the original weatherstripping has flattened out and hardened. New OEM sweeps and properly adjusted rollers close those gaps.
- Sticking or hard-to-latch sashes and sliders. Vinyl frames expand noticeably in Fontana’s heat, and after enough summers the sashes on ES Windows horizontal sliders bind against the track. Sometimes it’s a roller replacement; sometimes the frame needs a reset. Either way, forcing a bound slider usually makes it worse.
- Water intrusion at sill pans on retrofitted windows. Many Fontana homes built in the 1950s and 1960s had their original steel or wood windows swapped for ES Windows vinyl units decades ago. If the rough opening wasn’t properly flashed at the time, winter rains find their way in at the sill. We pull the trim, re-flash with modern sill pan tape, and reset the unit so it drains correctly.
- Warped or cracked frames on south- and west-facing elevations. Direct afternoon sun on a Fontana west wall is brutal. Vinyl frames that have baked for 20 or 30 years can warp enough to throw the sash out of square, and once the frame is twisted, no amount of hardware adjustment will fix it. That’s when we’ll tell you honestly that replacement is the better investment.
ES Windows Service in Fontana: What Local Conditions Mean for Your Equipment
Here’s something most window contractors won’t mention, but it matters if you own an older Fontana home: much of the city’s original housing stock was built for Kaiser Steel mill workers, and the former mill site and surrounding brownfields required extensive soil remediation and special foundations before any new construction could go up. That legacy shows up in window retrofits in Fontana’s core, where we regularly run into rough openings that have settled out of square by a quarter inch or more, spalling concrete sills, and original framing that was never quite plumb to begin with. A window pulled from a newer Rancho Cucamonga subdivision might drop into a clean, square opening. Pull one from a 1958 rancher off Sierra Avenue and you’re likely fighting settling and uneven reveals. That’s why we don’t bid Fontana window work sight unseen. We measure, we check the diagonals, and we factor the opening conditions into the price before we start, because discovering a racked rough opening mid-install is exactly how budgets blow up. If it’s not built right the first time, you’re just paying for it twice.
ES Windows Models & Products We Service in Fontana
We work on the full range of ES Windows products commonly found in Fontana homes, including Glen Avon ES Windows service areas. That includes ES Windows 2000 and 3000 Series vinyl single-hung windows, vinyl horizontal sliders, vinyl sliding glass doors, and the older aluminum-series units still present in many 1950s and 1960s tract builds. Our parts approach is simple: OEM ES Windows sashes, rollers, sweeps, and glazing where the manufacturer still supplies them, and dimensionally matched aftermarket hardware where they don’t. For most common repairs in Fontana we keep the frequently needed items, rollers, sweeps, glazing tape, on hand or available same-week through our local suppliers, so you’re not waiting on a slow freight shipment for a door that won’t latch.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Fontana
Window work costs what it costs because of what’s behind the trim. A simple roller and weatherstrip service on one slider runs at the low end; a full-house replacement of 10 or 12 windows in a Fontana two-story is a different job entirely. Here’s what our Fontana customers typically see:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost: how many units you’re replacing, whether the rough openings need re-flashing or reframing, what glass package you choose, and whether we’re doing impact-rated glass for wind-driven debris. Our free estimates include the measurement, the opening inspection, and a written line-item quote so you know exactly what you’re paying for. Call (855) 473-5620 to schedule yours.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Fontana
Yes, whenever ES Windows still manufactures the part we need, sashes, rollers, sweeps, glazing, we order the OEM component. When a model has been discontinued and the factory no longer stocks the part, we use dimensionally matched aftermarket hardware that meets the same fit and function. We’ll tell you which is which on the quote. Call (855) 473-5620 if you need a specific part sourced.
Most single-unit repairs, a roller replacement, a sweep seal, a glazing swap, take one to two hours on site once the parts are in hand. Full window replacements on multiple openings run longer, typically one to three days depending on the size of the job and what we find behind the trim. Emergency board-up or temporary weather sealing after a Santa Ana wind event can often happen the same afternoon. Call us for a realistic timeline on your specific job.
We service the ES Windows 2000 and 3000 Series vinyl single-hung and horizontal slider lines, vinyl sliding glass doors, and the older aluminum-series windows that show up in Fontana’s 1950s and 1960s tract homes, including Pedley ES Windows service coverage. If you’re not sure which series you have, send us a photo of the corner logo or the spacer between the glass panes, and we’ll identify it before we come out.
No, and we’re upfront about that. San Bernardino Contractors is an independent General Contractor – Fontana. We are not authorized, sponsored, or endorsed by ES Windows. What that means for you: we diagnose and repair what’s actually failing on your windows rather than steering you toward a full replacement because it’s easier for us. Independence also means we can mix ES Windows work with other trades, roofing, siding, stucco, interior remodel, under one contract and one schedule.
A straightforward repair, new rollers and a sweep on a slider, is usually a few hundred dollars. Replacement windows run $4,500 to $15,000 for a full-home scope, and impact-rated installations range from $8,000 to $25,000 depending on the glass package and the number of units. The only way to get an exact number is a site measurement and opening inspection, which we do as part of the free estimate. Call (855) 473-5620 to book one.
Service Areas Near Fontana
We run ES Windows service calls throughout the western Inland Empire. If you’re in Bloomington, Rialto, Sunnyslope, Glen Avon, or Muscoy, you’re within our normal service radius. We also maintain a dedicated Fontana service area page with local specifics. For neighboring communities, see our pages for ES Windows service in Bloomington and ES Windows service in Rialto.
Book Your ES Windows Service in Fontana Today
Fogged glass, a sticking slider, or dust blowing through a closed window isn’t going to fix itself, and Fontana’s heat will only make it worse as summer drags on. Call San Bernardino Contractors at (855) 473-5620 to schedule a free estimate. We’ll measure, diagnose, and hand you a line-item quote before any work starts.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Fontana’s window repair and replacement needs across the city’s tract homes, infill subdivisions, and warehouse-office buildouts.