Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Redwood Shores, CA | San Bernardino Contractors
We provide independent Home Remodeling – Redwood Shores with ES Windows installation, retrofit, and repair across Redwood Shores, and the one thing that sets our work here apart is that we flash every opening for bay mud, salt air, and a high water table, not just for looks. Redwood Shores sits on engineered fill over reclaimed marsh, which means window and door openings move, corrode, and drain differently than they do ten minutes inland. That’s the problem we solve every week. Call (855) 473-5620 for a free estimate on your ES Windows project.
Why Redwood Shores Residents Choose Us for ES Windows Service
We’re not a manufacturer rep, and we don’t sell ES Windows product. That matters because our recommendation to repair or replace is based on what’s actually happening in your opening: the condition of the frame extrusion, the sheathing behind the sill, and how the units are performing in their eighth or ninth year under Redwood Shores’ fog cycle. Ruben Castillo, our General Contractor – Redwood Shores owner, learned framing and load paths the hard way, from his uncle’s job sites in San Bernardino, and that background means we never skip the flashing details that determine whether a window lasts five years or twenty.
Our crews work on ES aluminum sliders and single-hungs in bay-front planned communities like Redwood Shores on a regular basis. We know how these units age in marine air: where the corrosion starts, which seals fail first, and when a straight like-for-like swap is the wrong call. You pick the brand and the finish level, and we handle the construction, from tearing out the old unit to rebuilding the rough opening so it sheds water the way it should.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Redwood Shores
- Corroded fasteners behind aluminum frames. The original ES Windows in Redwood Shores’ 1980s and 1990s stucco homes were often set with galvanized or plain steel fasteners. Salt-laden bay air and the morning marine layer eat those fasteners, leaving rust streaks down the stucco and frames that loosen from the wall over time. We pull the unit, replace the anchors with stainless, and rebuild the flashing so the same corrosion doesn’t return.
- Clogged sill pans and weeps. Airborne bay grit is finer than inland dust, and it packs into ES aluminum sill pans and weeps until they stop draining. Wind-driven rain then ponds at the sill, and instead of an obvious leak, you get rot in the framing behind the opening. On lagoon-side elevations, we see this by year seven or eight.
- IGU edge-seal fogging on north and west elevations. The fog cycle in Redwood Shores is relentless, and ES insulated glass units on bayside and north-facing walls show edge-seal haze and condensation between panes after a decade. Seal failure clusters on the elevations that get the most marine exposure, not the whole house at once.
- Sliding-door roller and track wear from foundation movement. Redwood Shores homes sit on post-tension slabs and raised foundations over engineered fill, and that fill settles unevenly. ES aluminum sliders bind, drag, and wear their rollers and tracks when the slab or stem wall moves differently from the wall. Replacing the rollers without addressing the opening gets you six months of smooth operation before the drag returns.
- Pitted frame extrusions from bay moisture. Aluminum frames near the lagoons and sloughs take a beating from salt and persistent damp. Once pitting goes through the extrusion, the frame can’t hold a seal or a fastener. We evaluate every unit to tell you honestly whether repair makes sense or replacement is the only path.
ES Windows Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores is a master-planned community built on engineered fill over reclaimed bay marsh, and that single fact changes how every window opening here should be detailed. The fill settles, the water table stays high, and anything built near the sloughs triggers BCDC and City of Redwood Shores design review, a permitting stack that San Carlos ES Windows service areas and Belmont don’t have. That’s why our ES opening details lean on sloped sill pans, fluid-applied flashing, and flexible membranes rather than a straight like-for-like swap.
On a lagoon-front street off Redwood Shores Parkway, we saw a late-1980s two-story stucco home with original ES aluminum sliders fogging and dragging on the bay-facing elevation. When we pulled one unit, the sill pan and the sheathing behind it were wet. We rebuilt that opening with a sloped stainless sill pan, fluid-applied flashing, stainless anchors, and new ES slider hardware, then matched the other openings on that elevation so the whole wall flashed and drained the same way. Our tech documented the BCDC-exempt, in-kind replacement scope before ordering glass, so nothing stalled at the city.
ES Windows Models & Products We Service in Redwood Shores
We work on ES Windows Series 7000 aluminum single-hung and slider units, Series 2000 and 4000 vinyl single-hungs and horizontal sliders, ES aluminum sliding glass doors, and fixed and awning aluminum units set in stucco walls. When the catalog still supports the series, we use genuine ES Windows sashes, glazing, rollers, and hardware. Underneath, we use quality aftermarket sill pans, flashing membranes, and stainless fasteners, because the part that fails first on these units is usually the flashing and anchoring, not the glass. If the frame extrusion is sound and the rough opening is dry, we repair. If the profile is pitted through or the opening has moved, we replace. For full ES Windows sales & service, our team can walk you through the decision.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Redwood Shores
What you’ll pay depends on how many openings we’re rebuilding, the condition of the rough framing, and whether the job is repair or full replacement. A straight window replacement runs $4,500 to $15,000 depending on the series and the size of the openings. Impact-rated ES installation for bayside elevations ranges $8,000 to $25,000. Roof repairs tied to window flashing work run $400 to $1,800, and if you’re adding square footage with new ES openings, a home addition runs $45,000 to $130,000. Every estimate includes a line-item breakdown, and a written quote means the number doesn’t change once work starts.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Home Addition | $45,000 – $130,000 |
Those are honest market ranges for Redwood Shores, not a teaser number. Call (855) 473-5620 and we’ll put exact numbers on your openings.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Redwood Shores
In-kind window replacement with the same size and configuration is generally BCDC-exempt, but any work near the sloughs or lagoon setbacks can pull in BCDC review plus City of Redwood Shores design review. We verify the permit path before ordering glass, so the job doesn’t stall. Call (855) 473-5620 and we’ll tell you what applies to your street.
The lagoon-facing elevation takes more salt spray, fog, and wind-driven rain than the street side. Edge seals fail faster, weeps clog with bay grit, and sill pans corrode where the moisture sits. The street-side units simply haven’t had the same exposure. We can rebuild the bayside openings with better sill drainage and fresh ES glass without touching the units that are still dry. Call (855) 473-5620 for an exact quote.
Yes, and we do it carefully. Post-tension slabs mean we don’t cut or core through the slab without locating the tendons first. The window openings themselves are in the walls, so the work is straightforward, but any addition or door widening near the slab edge gets extra attention. A free estimate includes a site check for this.
If the frame extrusion is pitted through or the opening has moved enough that the door will never roll true, replacement is the honest call. If the pitting is cosmetic and the slab settlement has stabilized, we can reset the track, replace the rollers, and get years more out of the door. We’ll show you what we’re seeing before we recommend anything.
Yes, count on it. Lagoon-adjacent work in Redwood Shores adds BCDC review on top of City of Redwood Shores design review, and that typically adds months to the schedule, not weeks. We sequence the window package and the permit submittals so the ES product lead time doesn’t add any extra delay on top of that. Call (855) 473-5620 to walk through the timeline for your property.
Service Areas Near Redwood Shores
We serve Redwood Shores and the surrounding bayside and Peninsula communities. Our team regularly works in Redwood Shores service area neighborhoods along the lagoon-front streets, plus ES Windows service in Belmont and ES Windows service in Foster City. If your home sits on engineered fill or near the bay, we already know what that means for your openings.
Book Your ES Windows Service in Redwood Shores Today
If it’s not built right the first time, you’re just paying for it twice. We’ve rebuilt enough ES openings in Redwood Shores to know what the bay does to a window over a decade. Call (855) 473-5620 today and we’ll schedule your free estimate, walk the openings with you, and give you written numbers.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Redwood Shores with independent ES Windows construction and retrofit work.