Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Perris, CA | San Bernardino Contractors
We provide independent Mr-Glass shower enclosure, mirror, and glass-glazing service across Perris, CA, and nearby communities including Mead Valley Mr-Glass service. What makes our Mr-Glass work different here is simple: Perris sits on former dairy land and mapped fault zones, so shower walls and curbs move more than a stock enclosure expects. That means out-of-plumb glass, curb leaks, and hinge sag are normal repair calls for us, not rare ones. Call (855) 473-5620 for a free estimate.
San Bernardino Contractors works directly with Mr-Glass hardware and tempered glass panels, but we’re not a manufacturer-authorized dealer. That independence lets us fit glass to the actual framing, tile, and slab conditions each Perris home presents, instead of forcing a catalog configuration. For full Mr-Glass sales & service details, our team covers everything from frameless pivot doors to custom vanity mirrors. We serve the entire Perris service area including 92570, 92571, 92572, and 92599.
Why Perris Residents Choose Us for Mr-Glass Service
We know Mr-Glass product lines by name, not by guesswork. Our crews work with Series 100/200-style 3/8-inch tempered frameless enclosures, semi-frameless sliding bypass doors, and custom-cut vanity mirrors every week. Ruben Castillo, our owner, grew up in San Bernardino’s Westside watching his uncle reroof houses and frame garages on a shoestring. That hands-on education taught him to read walls for plumb and floors for level, which is exactly what a Mr-Glass enclosure demands. We match OEM Mr-Glass hardware where the series is still supported, and we source quality aftermarket rollers, seals, and pivots when a model line is discontinued or the glass itself is still sound. Perris homeowners call us because we tell them the truth about whether a re-seal and re-hang will outlast the door, or whether the honest call is replacement.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Perris
- Pivot-door sag and hinge screw pull-out. Frameless Mr-Glass enclosures hung on Perris stucco-and-drywall walls flex seasonally, especially in the newer 92571 tract homes east of I-215. The pivot hinge drifts out of plumb, the door starts dragging, and the lower glass edge chips. We re-plumb the opening, reset the hinge with proper backing, and re-hang the door.
- Hard water and mineral etching on glass and hardware. Perris Valley water carries heavy mineral content, and Santa Ana wind events push grit into shower enclosures. Untreated glass develops a permanent haze, and chrome or anodized hardware dulls fast. We restore what can be restored and replace glass when the etching has gone too deep.
- Sliding bypass track corrosion and roller failure. Monsoon-season splash plus tight ventilation in newer Perris homes leaves water pooled in the bottom track. Rollers rust, the door jams, and the track corrodes. This shows up often on tub-shower glass in the older 92570 ranch homes where bathrooms were never designed for heavy daily use.
- Out-of-square rough openings after a remodel. We see this constantly: a homeowner retiles a shower curb, the wall shifts during demo, and a stock Mr-Glass enclosure no longer hits its seals. Leaks appear at the curb and the vertical wall jamb. We measure the actual opening and cut the glass to fit it, not the other way around.
- Failed seals on frameless panels. The silicone bead between glass and tile breaks down faster in Perris heat, especially on west-facing shower walls. Water seeps behind the panel, mold starts, and the curb rots. We strip the old seal, treat the surface, and re-bed the glass properly.
Mr-Glass Service in Perris: What Local Conditions Mean for Your Equipment
Perris sits over some of the most actively fault- and liquefaction-mapped ground in Southern California, and much of the 92571 growth corridor was dairy and agricultural land less than a generation ago. That matters for your shower enclosure because agricultural soils settle unevenly after a slab cures, and the seasonal expansion and contraction keeps working on the walls months after the tract home is finished. We saw this firsthand on a newer stucco home east of I-215, not far from where we also provide Mr-Glass service in Sun City: a Mr-Glass frameless pivot enclosure had sagged badly because the hinge pulled out of a wall that had settled after the slab cured. We re-plumbed the opening, installed new OEM pivot hardware and 3/8-inch tempered panels, and re-sealed the curb so the door closes clean without dragging. If you’re in the older 92570 ranch properties, the issue is usually the opposite: decades of settling have shifted studs and tile, and every shower opening is out of square by a half-inch or more. We measure, shim, and cut for what’s actually there. Ruben puts it plainly: if it’s not built right the first time, you’re just paying for it twice.
Mr-Glass Models & Products We Service in Perris
We service the full Mr-Glass residential lineup. That includes frameless fixed-panel and pivot shower door enclosures using 3/8-inch tempered glass, semi-frameless sliding bypass shower and tub-shower glass doors, custom-cut mirrors and framed vanity mirrors, plus glass shelves, glass table tops, and railing panels. On the parts side, we fit OEM Mr-Glass glass and hardware when the series is still supported. When a model line is discontinued, we match quality aftermarket seals, rollers, pivots, and hinge hardware so a sound glass panel doesn’t end up in a landfill. We stock common rollers, seals, and pivot bushings for fast Perris turnaround, and we order custom glass cuts locally when the opening demands it.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Perris
What you’ll pay depends mostly on glass size, hardware finish, and whether the opening needs correction before the enclosure goes in. A quick tub-to-shower conversion runs on the lower end; a full walk-in with custom-cut frameless glass lands higher. Here’s what we quote across Perris:
| Service | Typical Perris Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every estimate includes on-site measurement, glass and hardware selection, and a written line-item quote before any work starts. Call (855) 473-5620 and we’ll come out, take the measurements, and put a number in front of you.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Perris
No, and that’s deliberate. We’re an independent Mr-Glass service provider, which means we can mix glass thicknesses and hardware with the framing, tile, and slab conditions each Perris property presents. We’re not locked into a single catalog configuration. Call (855) 473-5620 to discuss what your opening actually needs.
It absolutely affects fit, because Perris sits over fault- and liquefaction-mapped ground, and much of the 92571 corridor was former dairy land that settles unevenly. A stock enclosure loses plumb as walls shift, and that’s where leaks and door drag start. We account for movement when we measure, shim, and cut. Call (855) 473-5620 for a free assessment.
Both. We fit OEM Mr-Glass glass and hardware where the series is still supported. When a model line is discontinued or the glass is sound but the hardware is shot, we match quality aftermarket seals, rollers, pivots, and hinge hardware. We’ll always tell you which route makes sense for your door.
We handle the full residential lineup: frameless fixed-panel and pivot enclosures, semi-frameless sliding bypass shower and tub-shower doors, custom-cut and framed vanity mirrors, glass shelves, table tops, and railing panels. If it’s Mr-Glass residential glass, we’ve worked on it in Perris.
Most shower glass repairs and measurements get scheduled within a few business days across Perris. Custom glass cuts add a few days depending on the glass shop. Call (855) 473-5620 for our current schedule, and we’ll get you on the books.
Service Areas Near Perris
Beyond Perris, our crews cover the surrounding Inland Empire communities. We regularly work in Mr-Glass service in Good Hope, where older ranch homes share the same settling and out-of-square openings we see across 92570. We also handle Mr-Glass service in Lakeview for homeowners dealing with similar hard-water etching and track corrosion. Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy are all within our normal route.
Book Your Mr-Glass Service in Perris Today
If your Mr-Glass enclosure is sagging, leaking, or jammed, don’t wait for the curb to rot. Call (855) 473-5620 and we’ll schedule a measurement and give you a written quote. We serve all Perris ZIP codes: 92570, 92571, 92572, and 92599, plus Mr-Glass service in Romoland. Free estimates, no pressure, just a straight answer on what your shower needs.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Perris and the Inland Empire.