Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Fountain Valley, CA | San Bernardino Contractors
San Bernardino Contractors provides independent Mr-Glass window and door service across Fountain Valley, from glass replacement to full retrofits. The thing that sets our Mr-Glass work here apart is knowing how these aluminum-framed units behave in Fountain Valley’s tightly built-out, mid-century ranch stock, where original 1960s windows are still doing daily duty. We’re not a manufacturer affiliate. We’re a local General Contractor – Fountain Valley that fixes and replaces Mr-Glass products the right way. Call (855) 473-5620 for a free estimate.
Why Fountain Valley Residents Choose Us for Mr-Glass Service
Most Fountain Valley homes were built between the 1950s and 1970s, and a lot of them still carry original Mr-Glass aluminum windows and sliding doors. Those units have specific failure patterns that a general contractor who’s seen hundreds of them can spot in minutes. Ruben Castillo, our owner, grew up watching his uncle reroof and frame garages on the Westside of San Bernardino, and he still approaches every Fountain Valley job the same way: find the actual problem, don’t upsell, and fix what’s fixable. Our crew stocks Mr-Glass hardware and replacement glass that the big-box stores in Fountain Valley don’t carry, so we can often repair a unit instead of replacing the whole thing. We also understand the plan-check environment here, which matters when a window opening changes size or egress. You get one contractor, every trade, and the Mr-Glass knowledge baked in. Explore our broader Mr-Glass sales & service capability.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Fountain Valley
- Fogged dual-pane glass on Mr-Glass 6000 Series sliding windows. Fountain Valley’s dry Santa Ana wind events stress the seal integrity on older dual-pane units. The 6000 Series is a frequent culprit. We replace the insulated glass unit itself, not the whole frame, when the aluminum is still sound.
- Corroded aluminum frames and tracks on original single-hung Mr-Glass units. Homes built in the 1960s and 70s in Fountain Valley got hammered by decades of afternoon sun, especially on west-facing walls. We see pitted frames and oxide buildup in the tracks. Depending on the extent, we clean and repair or recommend replacement.
- Failing roller assemblies and misaligned tracks on Mr-Glass 3000 Series patio doors. Fountain Valley ranches sit on clay-prone soil, and decades of subtle settling throw sliding doors out of alignment. The 3000 Series door is heavy, and a worn roller makes it feel like you’re dragging a safe across the track. We replace rollers, realign the track, and get the door gliding again.
- Cracked or brittle glazing gaskets on Mr-Glass windows. UV exposure in this coastal-inland climate bakes rubber gaskets until they crack. Water intrusion during rare but intense winter storms is the telltale sign. We replace gaskets and reseal the glass pocket before the frame starts to rot or corrode from the inside.
- Sticking or seized Mr-Glass window latches and locking hardware. Salt air isn’t a huge factor this far inland, but decades of dust and oxidation in Fountain Valley’s dry climate still seize up old latches. We source OEM Mr-Glass latches when available, and quality aftermarket hardware when they’re discontinued.
Mr-Glass Service in Fountain Valley: What Local Conditions Mean for Your Equipment
Fountain Valley was incorporated in 1957 and largely built out by the 1970s, which means nearly every project here is a remodel, addition, or rebuild of a mid-century ranch tract house, not new construction. That changes the Mr-Glass conversation in a very specific way. Original Mr-Glass windows are often the only barrier between a 1950s-era ranch and today’s stricter energy codes, but many homeowners don’t realize that window replacement in Fountain Valley can trigger plan-check scrutiny if the opening size or egress changes. The city has essentially no vacant infill parcels left, so the permitting desk sees every alteration as a change to existing, already-built-out stock. In a 1968 ranch near Mile Square Park, we recently replaced a set of fogged Mr-Glass 6000 Series sliding windows. The original aluminum frames were still solid, so we reused them and installed new dual-pane insulated glass units with low-E coating, restoring clear views and cutting heat gain. The homeowner was relieved we didn’t push a full replacement, just targeted glass and seal work that respected the home’s original character. That’s the Fountain Valley reality: fix the Mr-Glass unit when the frame is good, and plan the permit path properly when it isn’t. If you’re in a neighboring community, see our Fountain Valley service area page for coverage details.
Mr-Glass Models & Products We Service in Fountain Valley
We work on the Mr-Glass 6000 Series aluminum sliding windows, the 800 Series single-hung windows, the 3000 Series patio doors, and the Custom Retrofit Window Line. Our parts approach is simple: OEM Mr-Glass glass and hardware first, because fit and finish matter on a house this age. When OEM parts are discontinued or priced into absurdity, we use high-quality aftermarket rollers, seals, and screens that hold up to Fountain Valley’s sun and Santa Ana winds. What we stock locally for fast Fountain Valley turnaround includes replacement insulated glass units, glazing gaskets, roller assemblies, and latch sets. If a frame is structurally sound, we repair. If it’s corroded or the glass seal is blown beyond saving, we recommend a full replacement with a modern energy-efficient unit, often from the brands we carry like PGT or CGI for impact-rated work.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Fountain Valley
What you’ll pay depends on whether we’re repairing glass and hardware or replacing the entire window or door. Repair work, like a new insulated glass unit or roller set, runs lower than full replacements. Full window replacement in Fountain Valley typically falls into the ranges below, and roof work gets bundled in when a leak around a window or door traces back to flashing or underlayment. A free estimate from us includes a line-item quote, not a round number pulled out of the air.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
If you’re weighing repair against replacement on original Mr-Glass windows, call (855) 473-5620. We’ll give you a straight answer and a free written estimate.
Serving Fountain Valley, CA — Our Local Coverage Area
We’re based in the Fountain Valley area and know this community well, and we also offer Huntington Beach Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Fountain Valley
Yes, in most cases. If the aluminum frame is solid and square, we can replace the insulated glass unit and reseal the window. The frame doesn’t need to come out. Call (855) 473-5620 and we’ll confirm in person.
You need a permit if the opening size changes or if egress requirements come into play. In Fountain Valley’s built-out housing stock, that’s a real consideration. If we’re doing a like-for-like swap, the path is simpler. We’ll tell you exactly what applies to your project before any work starts.
Almost always. It’s usually a failed roller assembly or a track that’s out of alignment from settling. We replace rollers and realign the track on Mr-Glass 3000 Series doors regularly in Fountain Valley and Mr-Glass service in Costa Mesa, and most of those doors have decades of life left. Call (855) 473-5620 for a free estimate.
No. Single-pane aluminum Mr-Glass windows from that era lose heat and gain heat fast. Replacing the glass with a low-E dual-pane unit, or doing a full replacement if the frame is corroded, is usually the single best comfort upgrade for a Fountain Valley ranch. The cost lands in the $4,500 – $15,000 range for full replacement, or less for glass-only work.
Yes. We match frame profiles, glass tint, and hardware style as closely as the current Mr-Glass line allows. For discontinued profiles, we source compatible retrofits that read the same from the street. This matters in Fountain Valley and nearby Mr-Glass repair in Westminster, where the ranch-era look is part of the house’s character. You pick the brand, we handle the build.
Service Areas Near Fountain Valley
We serve Fountain Valley and the surrounding cities, including Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy. For specific Mr-Glass work in those areas, see our Mr-Glass service in Midway City and Mr-Glass service in Murrieta Hot Springs pages.
Book Your Mr-Glass Service in Fountain Valley Today
If your Mr-Glass windows or doors are fogged, corroded, or dragging, call (855) 473-5620. We’ll schedule a free estimate, give you a straight repair-vs-replace answer, and handle the whole thing as your general contractor. If it’s not built right the first time, you’re just paying for it twice.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Fountain Valley and Orange County.