Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Abodu Construction in Burlingame, CA | San Bernardino Contractors
We provide independent Abodu construction service across Burlingame, from foundation through finish. What sets our Abodu work apart here is simple: we plan every placement, crane pick, and design-review package as one sequence. That matters on Burlingame’s 25-foot-wide lots, where a unit usually has to come over the house rather than beside it. Call (855) 473-5620 for a free estimate.
Why Burlingame Residents Choose Us for Abodu Service
We’re builders first. Ruben Castillo started San Bernardino Contractors on the principle that plan reading, load paths, and structural honesty beat brochure talk every time. Our crew has installed and serviced Abodu One, Abodu Two, Abodu Studio, and Abodu Junior units across the Peninsula. We know how a steel-framed module meets a 1920s foundation, how a roof-to-wall joint behaves in Burlingame fog, and where rot hides behind a site-built skirt board. For more on how our Abodu work fits our broader framing, browse our Abodu sales & service page.
We’re not a dealer reading a spec sheet. We’re the crew that pours the pad, bolts the anchors, ties in the utilities, and stands behind the site-built stairs and decks. On a zero-side-setback lot off Lincoln Avenue, we craned an Abodu Two over the main house, then found the proposed pad footprint overlapping a pre-code foundation from the original 1940s garage. We doweled and engineered a new pad at the corrected elevation, flashed every roof-to-wall joint in standing-seam metal, and handed the homeowner a level, dry unit before the winter rain set in. That’s the kind of detail Burlingame demands, and it’s the kind we plan for, just as we do for Abodu service in Highlands-Baywood Park.
Styles & brands we work with







Common Abodu Construction Problems We Solve in Burlingame
- Fog-belt moisture at panel seams and roof-to-wall joints. Burlingame sits in the fog belt just south of SFO, and cool damp summers keep exterior assemblies wet longer than the factory sealant schedule assumes. We see seam sealant failing early on units sited near the western flats. We re-flash those joints with standing-seam metal and proper sealant details that hold up to Bay moisture.
- Settlement and out-of-level door frames on older lots. Many Burlingame pads go in over former garage or shed footprints from the 1920s through 1950s, where fill was never engineered for a heavy module. Door frames rack and glass stresses. We correct the pad elevation, re-level, and dowel new anchors properly.
- Zero-side-setback mechanical chases freezing or backing up. When an Abodu unit’s utility side is placed in a zero-setback slot, there’s no service clearance. Condensate lines freeze, utility chases clog, and access for a future repair is miserable. We re-route chases, add cleanouts, and build in service access before the final inspection.
- Dry rot on site-built stairs, decks, and skirt detailing. The foggy west side of Burlingame punishes wood that was never flashed to the module. We find rot within a few winters. We replace rotted framing rather than patching it, then flash it so water can’t trap against the module skin.
- Roof flashing and tie-ins failing at the module ridge. Bay wind-driven rain pushes water under standard ridge flashings on Abodu units in exposed Burlingame yards. We repair with mechanically fastened metal flashing and ice-and-water shield at transitions, which the original factory detail often lacks.
Abodu Service in Burlingame: What Local Conditions Mean for Your Project
Burlingame’s 25-foot-wide lots with zero side setbacks mean an Abodu unit usually has to come over the roof by crane rather than through a side yard. That’s not a minor detail. The crane plan, the delivery path, the pick radius, and the protection of the existing house all have to be worked out before any panel ships, because the city’s design review reviews placement and setbacks early. On a lot near Burlingame Park with a mature oak and a zero side yard, the crane matting alone changed the entire site plan. We build the approval package and the crane plan together, so the unit arrives after the design review board has already seen exactly where it will sit. That’s the difference between a permit that clears in one cycle and one that gets sent back for months. For Burlingame specifically, pre-code foundation checks are the other half of the story: many of these older lots have buried concrete and former garage footings that the county parcel map doesn’t show, and a module set on top of that unseen condition will rack its door frames within two seasons.
Abodu Models & Products We Service in Burlingame
We work on all four Abodu model lines: Abodu One (one-bedroom backyard unit), Abodu Two (two-bedroom backyard unit), Abodu Studio (single-room backyard unit), and Abodu Junior (compact one-bedroom unit). For the module envelope, glazing, and mechanical connections, we use Abodu-specified OEM components to keep the unit’s own warranty intact. For site-built stairs, decks, trim, and skirt boards, we use quality aftermarket hardware that’s rated for coastal moisture exposure. We stock common flashings, sealants, anchor hardware, and mechanical fittings locally so a Burlingame service call doesn’t wait on a parts shipment, and we also handle Abodu repair in San Mateo with the same local inventory. On repair-versus-replace, our stance is honest: seams, flashings, and anchors get repaired. Rotted site-built framing behind an Abodu unit gets replaced rather than patched. That line matters when rot has already taken hold.
See the difference
Before
After
Before
After
Before
AfterAbodu Service Pricing in Burlingame
Abodu construction costs depend on site conditions, model size, and how much site-built work the lot requires. A zero-side-setback crane pick costs more than a driveway delivery, and an older lot with pre-code foundation issues adds pad engineering. Here are the ranges we work within:
| Project | Typical Burlingame Range |
|---|---|
| ADU Construction | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Garage Conversion | $30,000 – $80,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Every estimate is free and written, with the specific scope and materials named, whether from our General Contractor in Burlingame or a nearby service area. If it’s not built right the first time, you’re just paying for it twice. Call (855) 473-5620 for a quote on your Burlingame lot.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Abodu Construction in Burlingame
Yes, most Burlingame lots can take an Abodu unit, but the delivery method changes. With zero side setbacks, the module comes over the roof by crane rather than through a side yard. We plan the crane pick, matting, and roof protection into the permit package before panels ship. Call (855) 473-5620 and we’ll walk your specific lot.
Yes. Burlingame’s design review reviews placement, setbacks, and neighborhood compatibility before any panel is ordered. We prepare the approval package and the construction sequence together, so the crane plan and the unit placement match what review approves. Getting this wrong at the start adds months.
Fog-belt moisture is the biggest local risk, especially at panel seams and roof-to-wall joints. The factory sealant is not always adequate for Burlingame’s damp exposure. We resolve that by re-flashing joints in standing-seam metal and upgrading the roof-to-wall transition before the first winter. A correctly detailed Burlingame unit stays dry.
Big time. Pre-code foundations and old fill from a former garage often sit underground and don’t show on parcel maps. We’ve found original 1940s garage footings directly under proposed pad footprints. If the unit sets on that, doors rack and glass stresses. We check for these conditions and engineer the pad to bridge or remove them before the module arrives.
We are an independent Abodu service provider, not manufacturer-affiliated or authorized. That means we install and service the units as builders rather than as a factory representative. We use Abodu-specified OEM components for the module envelope and mechanical connections to keep the warranty intact, and we stand behind every site-built detail ourselves. For your Burlingame project, call (855) 473-5620 for a free estimate.
Service Areas Near Burlingame
We serve Burlingame and the surrounding Peninsula cities, including Hillsborough, El Granada, Millbrae, San Mateo, and Foster City. For our work just over the hill, see Abodu service in Hillsborough and Abodu service in El Granada. For the full coverage map, visit our Burlingame service area page.
Book Your Abodu Service in Burlingame Today
If you’re planning an Abodu in Millbrae, an Abodu in Burlingame, or have an existing unit that needs repair, call (855) 473-5620. We’ll schedule a site walk, talk through the crane plan and design-review package, and give you a written estimate. Free, specific, and based on what’s actually on your lot.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Burlingame since day one.