Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Cypress, CA | San Bernardino Contractors
We’re an independent Dvele construction service working across Cypress, CA. We build and repair Dvele panelized wall, floor, and roof systems, and we’ve spent enough time on Cypress job sites to know what these panels do when Santa Ana winds hit a tight 1960s tract lot. If you need a Dvele addition, ADU, or a repair on an existing Dvele assembly, call us at (855) 473-5620. We’ll tell you straight what the job needs and what it’ll cost.
Why Cypress Residents Choose Us for Dvele Service
Most contractors in Cypress have never touched a Dvele panel. We have. Our crews have built and finished Dvele’s panelized systems across Orange County, and we know the assembly details that show up on the plans but never in a brochure. We plan around the SIP spline connections, the factory-applied weather barrier, and the floor cassettes instead of discovering them while your subfloor is open.
Ruben Castillo, our owner, came up working on Southern California tract homes like the ones all over Cypress. He learned framing and structural work the slow way, by doing it, and by watching where corners got cut and what failed because of it. He’s the first one to say that if it’s not built right the first time, you’re just paying for it twice. That’s the standard we bring to every Dvele project in Cypress, whether it’s a full addition or a section of wall panel that needs re-flashing.
We’re not a manufacturer affiliate and we’re not an authorized Dvele dealer. That independence matters. We answer to you, not to a brand rep, and when a repair calls for a judgment call, we make it based on what the building needs, not what a warranty department wants to hear. Want to learn more about how we work with this system? See our Dvele sales & service page.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Cypress
Dvele’s panelized system is well-engineered, but Cypress gives it the same test it gives everything else built in the 1960s and 1970s. Here’s what we see most often on Dvele jobs in this city:
- Spline connections loosened by Santa Ana wind cycles. Dvele wall panels connect through integrated SIP splines. When hot, dry Santa Ana winds pound a two-story addition for a day and then give way to a cool coastal night, thermal movement works those spline joints loose. We’ve found gaps forming where the spline seats into the panel edge, and that lets air move through the envelope. The fix is re-seating the spline with OEM-compatible sealant and re-fastening to Dvele’s pattern.
- Weather barrier seams failing at lapped joints. The factory-applied weather barrier on Dvele panels is only as good as the lap at assembly. If a previous crew rushed that detail, winter rain finds the seam. In Cypress, that means water behind stucco, stains on interior drywall, and trapped moisture in the OSB skin. We pull the affected panel or section, re-lap the barrier correctly, and re-flash before any finish material goes back.
- SIP-to-foundation moisture wicking at the sill plate. This is a Cypress issue more than most places. The original 1960s slabs here are often uneven and lack a proper capillary break. When a Dvele wall panel sits on that older slab, moisture from the ground can wick up through the bottom plate and into the SIP skin. We address this with sill-seal retrofits, epoxy leveling, or a new capillary break depending on what the slab shows us.
- Cladding attachment points backing out of OSB skins. Dvele exterior cladding attaches to the OSB face of the SIP. The hot-dry to cool-night swing in Cypress causes the OSB to expand and contract enough that fasteners gradually loosen. We find this during roof and exterior inspections, and the fix is straightforward when caught early: re-torque to spec, replace any stripped fasteners with Dvele-approved alternatives, and check the whole elevation while we’re up there.
- Roof panel assembly gaps after high-wind events. Dvele roof panels depend on tight joints between sections. After a strong Santa Ana, we sometimes find panel seams that have shifted or sealant that has cracked. Left alone, the next winter rain gets in. We inspect the roof assembly, re-seat panels, and reseal joints before small movement becomes a water problem.
Dvele Service in Cypress: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Dvele page. Cypress was built out in the 1960s and 70s around the former Cypress Golf Course, now the site of the Civic Center and the edge of Los Alamitos Race Course. The housing stock is overwhelmingly original tract homes: single-story California ramblers and two-story stucco boxes on small lots with tight side-yard setbacks. Those homes were built when cast-iron sewer laterals were standard, and most of them still have the original pipe in the ground.
Why does that matter for Dvele construction? Because a Dvele addition or ADU almost always requires foundation excavation, and in Cypress, that excavation often runs right over a 60-year-old cast-iron lateral that’s already on its last legs. We scope a camera inspection before we ever dig. If the lateral is cracked or offset, replacing it before foundation work starts is far cheaper than fixing a collapse under a freshly poured grade beam. This is the kind of thing we handle upfront on Cypress service area jobs so the project doesn’t stop halfway through.
We built a two-story Dvele panelized addition on a 1960s rambler near the Civic Center where the original cast-iron lateral ran directly under the proposed foundation line. During panel layout, our tech caught a hairline crack in a spline joint that a Santa Ana wind event had stressed. We replaced the affected wall panel section with OEM splines and re-flashed the weather barrier before stucco. The homeowner avoided a costly future leak, and the addition passed inspection without a lateral replacement because we rerouted the tie-in clear of the old pipe. That’s the difference between a contractor who’s done this before and one who’s learning on your lot.
Dvele Models & Products We Service in Cypress
We work on the full Dvele assembly range: panelized wall systems with integrated SIP splines, floor cassette systems, roof panel assemblies, and exterior cladding and rainscreen details. When a Dvele assembly needs parts, we source OEM or Dvele-approved splines, sealants, and fasteners. The panel system’s engineered performance depends on those components matching the original spec, and aftermarket substitutes don’t always play well with the SIP skins.
We keep common Dvele-compatible sealants, fasteners, and spline stock ready for Cypress jobs. For larger panel sections or specialized parts, we order direct and schedule the repair so your project doesn’t stall. The question we always start with is whether a targeted repair restores the air and water barriers or whether a panel section should be replaced. Our answer depends on the damage, the location in the assembly, and the age of the panel, not on what’s quickest to invoice.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Cypress
Dvele construction pricing in Cypress follows the same patterns as the rest of Orange County, with one local wrinkle: tight lot access and older foundations can add prep work that a wide-open lot wouldn’t need. Here’s what you should expect for the most common Dvele projects we build in Cypress:
| Project | Typical Cypress Range |
|---|---|
| Home Addition (Dvele panelized) | $45,000 – $130,000 |
| ADU Construction (Dvele panelized) | $90,000 – $220,000 |
| Roof Replacement (on Dvele assembly) | $8,000 – $20,000 |
These ranges assume a standard Cypress tract lot with typical access. If your side yard is narrow enough that we need to crane panels over the house, or if we have to replace a cast-iron lateral before foundation work, those are line items on the estimate, not buried surprises. Every estimate is free and written as a line item breakdown. Call (855) 473-5620 to schedule yours, and we’ll walk the site with you. An exact quote takes about an hour on the property, and you keep the numbers whether you hire us or not.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Cypress
Yes, and we do it regularly. The key on Cypress tract lots is designing the panel layout to fit within the setback envelope before anything is ordered. Dvele panels come in fixed widths, so you can’t simply shave six inches off a wall to satisfy a zoning reviewer. We work with your site survey, check the CC&Rs if your tract has them, and often request a variance for the tighter lots. Prefabricated panels actually help here because assembly goes faster and the foundation footprint is cleaner. Call (855) 473-5620 for a free site review before you commit to a design.
Dvele’s SIP construction is stiffer than stick-framing, so the overall structure holds up well. The weak points in any wind event are the spline connections between panels, the weather barrier laps, and the cladding fasteners. In Cypress, we see those joints stressed more than in inland cities because the Santa Anas hit hard and then the air cools fast. Our service includes checking those connection points after major wind events, because small air leaks become bigger structural and moisture issues if ignored.
Not always, but we check every time. In Cypress, the original cast-iron laterals from the 1960s and 70s are frequently cracked, offset, or rusted through. If your Dvele addition’s foundation runs over that line, you’re gambling if you don’t look first. We run a camera scope before excavation. If the lateral is sound, we design the foundation to avoid it. If it’s failing, replacing it before the pour costs far less than fixing a broken pipe under new concrete. Call (855) 473-5620 to schedule a look.
Often, yes. Dvele’s panelized system is modular by design, so a damaged section can sometimes be isolated and repaired without pulling the whole wall. We assess the spline connections, the OSB skins, and the weather barrier. If the damage is limited to a single panel section and the surrounding structure is sound, we replace that section with OEM splines and re-flash. If the damage extends into the SIP core or compromises the air barrier across multiple panels, replacement is the honest call. We won’t patch something that should come out.
Dvele’s roof panels accept most standard roofing materials, but in Cypress we lean toward systems that handle both Santa Ana wind uplift and the occasional heavy winter rain. Concrete tile and standing seam metal both perform well here, and we’ve installed both over Dvele roof assemblies. The critical detail isn’t the shingle; it’s how the underlayment ties into the panel joints and how the roof-to-wall flashing seals at the SIP edges. We carry that waterproofing detail through from the panel to the finished roof. For an exact roof replacement quote on a Dvele home or addition in Cypress, call (855) 473-5620. Estimates are free.
Service Areas Near Cypress
Cypress sits close to a cluster of Orange County cities we serve regularly. Beyond Cypress, we take Dvele construction projects in nearby communities including Fountain Valley and Midway City. If you’re in one of those areas and need Dvele panel repair or a new panelized build, we cover it. See Dvele service in Fountain Valley or Dvele service in Midway City for details specific to those locations.
Book Your Dvele Service in Cypress Today
If you’re planning a Dvele addition, ADU, or need a repair on an existing Dvele assembly in Cypress, call us. We’ll walk the site, tell you what the panels need, and give you a written estimate before any work starts. Reach us at (855) 473-5620.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Cypress and the surrounding Orange County communities.