Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lompico, CA | San Bernardino Contractors
We install and repair Belgard paver driveways, patios, and retaining walls throughout Lompico, from Lompico Road down to the private lanes off East Zayante. We’re an independent Belgard installer, not a manufacturer-authorized dealer, so our credibility comes from building paver surfaces that hold up to Lompico’s steep grades, wet winters, and fire clearance rules — the same expertise you’ll find with Belgard in Brookdale. Call (855) 473-5620 for a free estimate on any Belgard project in the 95005 ZIP.
Why Lompico Residents Choose Us for Belgard Service
Ruben Castillo grew up on the Westside of San Bernardino, spending weekends watching his uncle reroof houses and frame garages. He went on to complete construction technology training at San Bernardino Valley College, where he learned to read plans and understand load paths before touching a job site. That background matters when you’re laying Belgard pavers on a Lompico hillside that drains directly into your foundation — skills we also apply for Belgard repair in Felton.
We know Belgard product lines by name: Lafitt Rustic Slab, Catalina Grana, Mega-Lafitt, Weston Stone. We know which series tolerates tree canopy shade that never dries, and which wall block needs an engineered footing on cut hillside fill. You won’t get a generic “we do pavers” answer from us. You’ll get a specific recommendation tied to your slope, your drainage, and your access.
We also carry genuine Belgard pavers and matching accessories from the same series so color and dimensional tolerances stay consistent. Base aggregate, geotextile, and polymeric sand come from suppliers matched to the job, not whatever is cheapest at the lumberyard.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Lompico
- Edge ravel and paver migration on steep driveways. Lompico driveways pitch hard toward the road, and runoff concentrates at the apron. Without a designed drain, water undermines the edge restraint and pavers start creeping. We rebuild the edge with proper base and drainage, not a cosmetic patch.
- Polymeric sand washout and joint erosion after wet winters. When the base wasn’t compacted in lifts or drainage daylighted at grade, Santa Cruz Mountain rain flushes the joints clean. We pull the affected field, re-set the base, and re-sand with drainage that actually moves water off the surface.
- Wall-block settlement and batter loss on cut hillsides. Belgard retaining walls built on fill without engineered footings or a drainage chimney will lean and settle. On Lompico’s cut sites, we dig to competent soil, install a proper footing, and backfill with a drainage chimney behind the wall.
- Freeze-thaw spalling, chipping, and moss-blackened faces. Older Belgard pavers under tree canopy that never dries take a beating. Inadequate base depth makes freeze-thaw cycles worse. We replace affected pavers in the same series and rebuild the base where it’s too thin.
- Heaved aprons where driveways meet the road. The transition from a Lompico private road to your driveway is a failure point. Poor drainage and no edge restraint heave the apron. We tear out the concrete and re-set the field on a benched, compacted grade that ties into a drainage swale.
Belgard Service in Lompico: What Local Conditions Mean for Your Project
Here’s what separates a Belgard job in Lompico from the same job in a flat suburban subdivision: the delivery truck often can’t reach the site. Lompico’s private mountain roads are narrow, winding, and low-canopied. Standard paver delivery trucks can’t clear the branches or make the turn onto many driveways. Steep driveways can’t take a loaded mixer. So on nearly every Belgard job we stage pallets at the road and shuttle them up-site by wheelbarrow or a small track machine. That affects crew size, schedule, and how we phase the work. It also means we order material in lifts the site can actually absorb, not one giant drop that blocks the road for a weekend.
On a steep, tree-canopied lot off Lompico Road, our crew tore out a heaved concrete apron and rebuilt the drive with Belgard Lafitt Rustic Slab over a compacted aggregate base installed on a stepped, benched grade. The delivery truck couldn’t clear the canopy or make the turn, so we staged pallets at the road and shuttled them up. We tied the finished surface into a new drainage swale and fire-clearance edge. That homeowner got a driveway that sheds winter runoff instead of puddling at the garage. If it’s not built right the first time, you’re just paying for it twice.
Belgard Models & Products We Service in Lompico
We work with Belgard Lafitt Rustic Slab pavers for driveways and large patios, Catalina Grana pavers where you want a smaller-scaled surface that curves naturally, Mega-Lafitt retaining wall blocks for cut-slope terracing, and the Weston Stone wall system for lower garden walls and planter boxes. We specify genuine Belgard pavers, wall units, and matching accessories from the same series so color and dimensional tolerances stay consistent. Where a failed Belgard surface is only locally damaged, we repair and re-lay the affected field. Where the base or drainage is the real problem, we rebuild it rather than patch over it. For Lompico’s delivery constraints, we keep a curated stock of common-series pavers and edge restraints staged near the valley so turnaround on repair jobs doesn’t wait on a truck that can’t get up the road anyway. This is also central to our Belgard sales & service work: the right product, matched to the site, installed with drainage that actually works.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lompico
Here’s what Belgard work costs in the San Lorenzo Valley market. Paver driveway installation runs $7,000 to $18,000 depending on slope, access, and total square footage. A paver patio runs $3,500 to $11,000. Retaining wall work falls within our hardscape scope and gets priced after we see the cut and the soil. A home addition with Belgard hardscaping integrated starts at $45,000 and runs to $130,000. Every job gets a free estimate with a written, line-item scope before we start. Call (855) 473-5620 and Ruben will walk the site with you.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition | $45,000 – $130,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well, just as we serve as a Lompico General Contractor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lompico
Yes, but only with a benched, stepped base, engineered drainage, and edge restraint that holds the field. Most Lompico driveways fail at the apron where runoff concentrates. Call (855) 473-5620 and we’ll tell you what your slope can actually take.
They wash out polymeric sand and erode joints unless the base was compacted in lifts and drainage was designed, not left to daylight at grade. We rebuild failed patios with the drainage fixed, not patched. Call (855) 473-5620 for a free drainage inspection.
Most paver patios and driveways under a certain square footage don’t need a permit, but retaining walls over 3 feet, or walls supporting a surcharge, go through Santa Cruz County. We handle county submittals and inspections as part of the job. Call (855) 473-5620 and we’ll tell you the exact trigger for your site.
Only with an engineered footing dug to competent soil and a drainage chimney behind the wall. Walls built on cut fill without those fail. We cut into the hillside, set the footing properly, and backfill with drainage. Call (855) 473-5620 for a site-specific answer.
Santa Cruz County requires defensible space on mountain homes, which shapes where hardscape can sit and how close it comes to vegetation. We design Belgard surfaces that work with your fire clearance, not against it — similar to our approach with Belgard in Mount Hermon. Call (855) 473-5620 to schedule a walk-through.
Service Areas Near Lompico
We run Belgard projects throughout the San Lorenzo Valley and over the hill. That includes Lompico service area coverage for Zayante, Felton, and Ben Lomond. We also serve Belgard service in Ben Lomond and Belgard service in Cambrian Park when clients cross the summit.
Book Your Belgard Service in Lompico Today
We schedule free estimates in Lompico five days a week. Ruben Castillo, Owner at San Bernardino Contractors, walks the site personally and writes every scope himself. Call (855) 473-5620 to book your walk-through.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Lompico and the San Lorenzo Valley.