CGI Construction in Los Serranos, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

CGI Construction in Los Serranos, CA | San Bernardino Contractors

If you’re planning a kitchen or bath remodel in Los Serranos and you’ve been looking at CGI cabinets and countertops, here’s the short version: we install, reface, and repair CGI product lines across the 91709 ZIP as an independent contractor, and our work here is shaped by one thing most contractors miss. Los Serranos sits at the foot of the Chino Hills near our CGI service in Chino, and the lots drain steeply toward the valley. Before we set a single CGI cabinet box or quartz slab, we check whether the floor underneath has moved. That’s the difference between a kitchen that holds square and one that starts racking after the first rainy season. Call San Bernardino Contractors at (855) 473-5620 to schedule a free estimate for CGI work in Los Serranos.

Call (855) 473-5620

Why Los Serranos Residents Choose Us for CGI Service

We’ve been through enough CGI installs in the foothills to know what holds up and what doesn’t. RTA plywood boxes need to be assembled right, not just tight. Quartz tops need level runs underneath, especially on floors that have settled half an inch over fifty years. When a homeowner calls us about CGI cabinets in Los Serranos, we talk about cam locks, plywood cores, and soft-close hinges by name because that’s what determines whether the run stays square.

Ruben Castillo, our owner, grew up on San Bernardino’s Westside watching his uncle reroof houses and frame garages. That early training stuck: he reads plans, understands load paths, and won’t let a cabinet install hide a structural problem underneath. Our crews work Los Serranos lots every season, from mid-century ranch homes near the country club to newer hillside tracts. We use OEM CGI parts when they’re available and quality aftermarket hardware when they’re not. No badge, no dealer markup, just cut-and-fit skill on the actual site. For the full picture on how we approach the brand, see our CGI sales & service page.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common CGI Construction Problems We Solve in Los Serranos

Here’s what actually goes wrong with CGI products in this corner of the Inland Empire, and why it shows up differently on the slopes:

  • RTA cabinet boxes that rack at the joints. CGI ready-to-assemble lines use cam-and-dowel fasteners. When the boxes sit in a hot Los Serranos garage through the summer before install, the plywood breathes, the fasteners loosen, and the box loses square. We re-square, reinforce with proper glue and screws where needed, and check every corner before it’s hung.
  • Chalked and blistered finished fronts on west- and south-facing runs. Santa Ana wind heat and hard UV hit the foothill side of Los Serranos hard. CGI painted doors and drawer fronts on exposed runs will blister if the finish wasn’t sealed after install. We see it most on remodels where the old windows let full sun pour onto the sink wall.
  • Swollen toe kicks and sink bases on older ranch homes. Mid-century Los Serranos homes near the country club were built before modern flashing and drainage were common. A winter roof or window leak runs behind the cabinet run, and the MDF-core components in CGI economy lines soak it up and swell. The cabinet gets blamed; the leak did the damage.
  • Cracked quartz at sink cutouts and overhangs. Fabricated CGI quartz won’t crack from heat alone. It cracks when the cabinet run underneath isn’t dead level and shimmed, and a sloped Los Serranos floor sends stress straight to the weakest point: the sink cutout and any overhang past 12 inches.
  • Doors and drawers out of alignment from day one. On a floor that’s settled, even a quarter-inch is enough to throw hinge geometry off. A door that won’t close flush or a drawer front that gaps isn’t a hardware defect; it’s the floor, and we fix the run, not just the hinge.

If any of this sounds like your kitchen, call (855) 473-5620. We’ll tell you over the phone whether it’s a repair or a replacement before we ever set foot on site.

CGI Service in Los Serranos: What Local Conditions Mean for Your Equipment

Here’s a fact about Los Serranos you won’t hear from a flat-lot contractor in Chino or our Yorba Linda CGI service area: the foothill lots along the 71 Expressway corridor drain steeply toward the valley floor. Every winter storm sends runoff down those slopes, and where the drainage isn’t handled, the ground under a raised foundation or slab can shift. We’ve measured settled floors on homes off Pipeline Avenue and along the hillside streets near the country club where the difference across a 10-foot run was nearly an inch. That movement is brutal on cabinetry and stone.

So before a CGI cabinet run or countertop goes in, we check the slab or raised floor it sits on. We look for signs of undermining from winter runoff, we level and shim the run, and we make sure the downspouts and window flashing route water away from the foundation, not toward it. If the site work isn’t right, the cabinets will rack, the quartz will crack, and the homeowner pays twice. Ruben’s rule applies here: If it’s not built right the first time, you’re just paying for it twice. That’s not a slogan; it’s the reason we open every Los Serranos kitchen job by looking at what’s under the floor, not what goes on top of it.

CGI Models & Products We Service in Los Serranos

We work with the full CGI range sold through building suppliers: the RTA all-plywood shaker and raised-panel lines, the semi-custom painted and stained collections, and the quartz and granite slab and fabricated tops. Interior and exterior door and trim series from CGI are in our wheelhouse too, but most of the Los Serranos calls we get involve kitchens: cabinet installs, refacing, and countertop replacements.

Our parts approach is simple and honest. When CGI’s own replacement doors, drawer boxes, hinges, and matching slab material are available, we use them. When a line is discontinued or the OEM hardware is back-ordered for weeks, we spec quality aftermarket soft-close hinges and solid-plywood components that fit the original footprint. We keep common hardware and shim stock on our trucks for Los Serranos jobs, so a mid-project adjustment doesn’t mean a three-day stall. If the box is sound, we reface and re-hinge. If the carcass has swelled or the corner joints have opened, we tell you replacement is the cheaper long-term fix, and we’ll show you why with the cabinet in front of you.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Service Pricing in Los Serranos

Los Serranos pricing tracks the broader San Bernardino market and our CGI repair in Montclair area, with hillside site work sometimes adding a line item for leveling and drainage corrections. Here’s what typical CGI-related work runs:

Service Price Range
Full Kitchen Remodel $14,000 – $45,000
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000

What moves the number: the size of the run, whether we’re doing a full tear-out or a reface, stone selection, edge profiles, and whether the floor needs leveling and shimming before anything gets set. A free estimate from us includes a floor check and a straight answer about what’s needed. Call (855) 473-5620 for an exact quote on your Los Serranos CGI project.

Serving Los Serranos, CA — Our Local Coverage Area

We’re based in the Los Serranos area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – CGI Construction in Los Serranos

Service Areas Near Los Serranos

Our crews work throughout the foothill corridor and the surrounding valley communities. If your home is in Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, or Muscoy, you’re within our regular service radius. For hillside homeowners further up the range, see our CGI service in Lake Arrowhead page. For the El Cerrito side of Corona, start with CGI service in El Cerrito Corona. And for the broader picture of where we work, visit our Los Serranos service area page.

Book Your CGI Service in Los Serranos Today

Whether it’s a full kitchen, a cabinet reface, or a countertop that needs a level run underneath, our Pomona CGI service team is ready to take a look. Call San Bernardino Contractors at (855) 473-5620 to schedule your free estimate in Los Serranos. We’ll check the floor, talk through your options, and give you a number you can plan around.

Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Los Serranos and the surrounding foothill communities.

Need Construction help in Los Serranos? Licensed & insured · Free on-site estimates response · free estimates
Call (855) 473-5620
Areas We Serve

Request a Free Estimate in Los Serranos

Tell us what you need — San Bernardino Contractors responds fast. No obligation.

When you submit this form, you accept our Privacy Policy and authorize us to contact you by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Call Now - 24/7 Dispatch