Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Millbrae, CA | San Bernardino Contractors
We’re an independent Millbrae General Contractor crew that services CGI cabinetry and handles full kitchen and bath remodels across the city. Our work here is shaped by one reality: most Millbrae homes are 1940s to 1960s ranches on narrow, tree-constrained lots, and their original or early CGI thermofoil and laminate cabinet lines fail in predictable ways when the fog rolls in off the coast. We fix them, reface them when the boxes are still sound, or replace them outright when the damage runs too deep. Call (855) 473-5620 and we’ll walk you through what your cabinets actually need.
Why Millbrae Residents Choose Us for CGI Service
We’ve torn out and rebuilt more CGI cabinet lines in Peninsula kitchens than we can count, and we know exactly which hinges, drawer boxes, and finishes give out first in Millbrae’s marine-layer climate. Ruben Castillo runs our crew, and he learned cabinet work the same way most of us did: by watching what falls apart after ten or fifteen years of wet winters and daily use. We’re not a manufacturer showroom and we don’t pretend to be. That means we can tell you straight up whether a repair is worth your money or whether replacement is the only honest fix. We stock common CGI hinge and glide profiles locally, and we carry quality aftermarket options for lines that have been discontinued. For homeowners across Millbrae, that usually means a decision made in one visit instead of three.
Styles & brands we work with
Common CGI Construction Problems We Solve in Millbrae
CGI cabinets are on plenty of Millbrae job sites, especially in the ranch-era homes and the townhome infill near El Camino Real. Here’s what we see, house after house:
- Thermofoil and laminate door skins peeling at the edges. Millbrae’s fog-driven humidity gets behind the skin on older CGI doors, and the corners start lifting. This shows up most on cabinet walls facing the coast side of the house. Once peeling starts, it doesn’t stop on its own.
- Sink base boxes swelling from slow leaks. A small dishwasher or plumbing leak soaks into the particleboard or MDF base, and within a couple of wet winters the box swells enough to throw off the doors and bind the drawers. We’ve opened a lot of Millbrae sink bases that were holding water longer than anyone realized.
- Soft-close hinges and undermount glides wearing out. The galley kitchens in 1940s and 1960s ranches are tight, and every door gets opened constantly. Hardware that was fine a decade ago starts sagging, and drawers don’t sit square. We rebuild or replace using OEM where it’s still made, and aftermarket where the OEM line is dead.
- Painted and foil faces yellowing or chipping near the range. Small, poorly ventilated Millbrae kitchens trap heat and steam right around the cooktop. The cabinet faces beside the range take the worst of it, yellowing, chipping, and looking rough years before the rest of the kitchen does.
- Drawer boxes that bind after years of moisture cycling. Even without a visible leak, the seasonal humidity cycle in Millbrae swells and shrinks MDF drawer boxes. Eventually they stick hard enough that something breaks. A planed edge and new glides usually puts it right, as long as the box isn’t already gone.
CGI Service in Millbrae: What Local Conditions Mean for Your Cabinetry
On the flat blocks west of El Camino Real, the typical Millbrae lot is narrow and shallow, with mature street trees and side setbacks measured in feet, not yards. That changes how we approach nearly every kitchen and bath job here. When a homeowner wants more cabinet or vanity space, the first instinct is to bump the wall out or add a small addition. But in Millbrae that routinely triggers tree-protection review and tight side-setback scrutiny, which stalls permits and can make the addition impossible as planned. So we solve inside the existing footprint instead. We pull right up to the load-bearing walls, rework plumbing and electrical in place, and spec cabinet runs that squeeze usable storage out of every inch without moving a single exterior wall. A lot of contractors want to sell you a bigger footprint. We’ll tell you when you don’t actually need one, because we’ve done enough of these to know which options will clear the city’s review. That keeps your project moving, and it keeps the neighbor’s oak off the cutting floor.
CGI Models & Products We Service in Millbrae
We work on the full range of CGI cabinetry that shows up in Millbrae homes. The Euro-style frameless full-overlay lines we see in the townhome kitchens along the El Camino corridor, the shaker and raised-panel door lines common in the mid-century ranches, and the thermofoil and laminate finishes in older homes that date back before frameless was standard. Our parts approach is simple: use OEM hinges, glides, and hardware when they’re still available and priced honestly. When a line is discontinued or the OEM part is absurdly expensive, we switch to a quality aftermarket equivalent that fits the same predrilled holes. We keep common profiles on hand for Millbrae service calls, which cuts turnaround when a drawer glide fails or a hinge seizes up. If you’re deciding between refacing and replacing CGI boxes, check whether the boxes are swollen or delaminated first. Sound boxes reface beautifully. Wet or swollen boxes are throwing good money after a problem. We’ll tell you which you have.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Millbrae
Pricing depends on whether we’re refacing, doing a partial repair, or pulling everything and setting new boxes. Millbrae’s wet-winter humidity means we always factor in proper sealing, especially on sink bases and anywhere near a dishwasher. Here’s the range we see for the work we do most often:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Every estimate is a written line-item quote, so you see exactly what you’re paying for before we touch a cabinet. Call (855) 473-5620 and Ruben or one of our guys will come out to Millbrae, look at the damage, and give you a number you can actually plan around. Estimates are free, and we won’t add change orders once the scope is set.
Serving Millbrae, CA — Our Local Coverage Area
We’re based in the Millbrae area and know this community well, and we also provide CGI in Burlingame. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Millbrae
It doesn’t affect the work itself, but it can shape the permitting conversation. Millbrae sits directly beneath SFO’s approach, and the city watches anything that might change rooflines, second-story massing, or exterior envelope work more closely than most municipalities. Interior kitchen and bath work, including cabinet replacement and refacing, rarely triggers additional review because nothing about the exterior changes. Where it can matter is if your remodel is paired with an addition or roof work, where FAA-related and city review timelines can add weeks. Call (855) 473-5620 before you commit to plans, and we’ll tell you what Millbrae actually requires for your project.
No, and that’s deliberate. We’re an independent contractor, not a CGI dealer or a factory-authorized shop. That means we can recommend the right repair, OEM or quality aftermarket, instead of whichever product the manufacturer is pushing this quarter. We work with OEM parts when they make sense and aftermarket when they’re better or cheaper, based on what’s actually right for your Millbrae kitchen, not what a brand agreement dictates.
Most repairs, including hinge swaps, glide replacements, and hardware fixes, are a single visit of one to three hours. Replacing just a sink base run or a damaged door line is usually two to four days depending on what we have to order or trim in. Full kitchen replacement, including new boxes, doors, counters, and backsplash, runs in the two-to-six week range once materials are in hand. Millbrae’s permitting process doesn’t usually slow down interior cabinet work since no exterior boundaries change, but we’ll confirm that before we schedule.
We work across the CGI lines most common in Millbrae and nearby: Euro-style frameless full-overlay cabinets found in newer townhomes near the BART and Caltrain corridor, and the shaker, raised-panel, thermofoil, and laminate lines typical of mid-century ranch kitchens. We also offer CGI service in South San Francisco. If you’re not sure which line you have, send us a photo or have us out for a look. We’ll identify the door profile and tell you whether the parts are still made.
Partial repairs and hardware replacement are usually at the low end of the pricing table above. Refacing a full kitchen lands in the middle of the cabinet installation range, and full replacement with new boxes, doors, counters, and backsplash runs from about $14,000 to $45,000 depending on kitchen size and finish level. Millbrae’s lot constraints often mean we’re working in the existing galley footprint, which can raise labor slightly but rarely changes the material cost. Call (855) 473-5620 for a written estimate.
Service Areas Near Millbrae
We also run CGI service calls to nearby Peninsula and South Bay communities. Depending on the week, our crew covers San Bruno, Burlingame, South San Francisco, San Mateo, and Daly City. You can also find us through the Millbrae service area page or explore our broader CGI work at CGI sales & service. For homes a few minutes south, we keep regular hours on CGI service in San Bruno, and for coastal-adjacent work we cover CGI service in Moss Beach as well.
Book Your CGI Service in Millbrae Today
Wet cabinet boxes, peeling thermofoil, sagging hinges: these don’t fix themselves. Call (855) 473-5620 and tell us what you’re seeing. We’ll schedule a walkthrough in Millbrae and give you a straight answer, a written line-item estimate, and a plan that actually fits your kitchen. We also handle Hillsborough CGI service. Same-week appointments are usually available for small repairs.
Written by Ruben Castillo, Owner at San Bernardino Contractors.