Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Pacifica, CA | San Bernardino Contractors
We provide independent CGI cabinet and countertop installation, repair, and full-kitchen remodeling across Pacifica’s fog belt. The one thing that sets our CGI work here apart: we build every exterior wall opening with Pacifica’s wind-driven moisture in mind before a single cabinet box goes up. If you’re planning a kitchen or bath upgrade with CGI products, call (855) 473-5620 for a free estimate from a crew that knows this coastline.
For broader CGI product background, see our CGI sales & service page. We’re San Bernardino Contractors, an independent general contractor serving Pacifica service area – not a CGI-authorized dealer, which means honest repair-vs-replace advice instead of a sales script.
Why Pacifica Residents Choose Us for CGI Service
We’ve installed and serviced CGI Euro-style frameless cabinets, Shaker cabinetry, quartz countertops, and granite countertops along the San Mateo coast long enough to know where these products fail here. Salt-laden air doesn’t care about brand loyalty. Hinges pit. Drawer slides bind. Cabinet boxes swell along sink runs. Our crew tracks every installation detail, from fastener selection to substrate sealing, because in Pacifica the difference between a five-year kitchen and a twenty-year kitchen is usually something invisible. That’s why homeowners also trust us for CGI service in San Bruno and nearby coastal communities.
Ruben Castillo, our owner, grew up watching his uncle reroof houses on a shoestring budget in San Bernardino, then got serious about load paths and structural work at San Bernardino Valley College. He applies the same “build it for the actual conditions” approach to every Pacifica CGI project and every CGI repair in Broadmoor. When we open a wall in Westview or Park Pacifica, we expect rot. We plan for it. That keeps your CGI investment from sitting on a compromised frame.
Styles & brands we work with
Common CGI Construction Problems We Solve in Pacifica
- Swollen, delaminating cabinet boxes on sink runs and exterior walls. The marine layer keeps wood perpetually damp, and a CGI cabinet box on an unsealed exterior wall soaks that moisture in through the back panel. We see doors that won’t close square and side panels peeling apart within two or three fog seasons if the wall behind them wasn’t dried and sealed first.
- Corroded hinges and drawer slides. Standard factory hardware on CGI cabinets pits fast in salt air. Drawers start sticking, then grinding, then the slide fails entirely. We swap in corrosion-resistant aftermarket hardware on every Pacifica install, because the OEM spec wasn’t written for this coastline.
- Cloudy etch marks on CGI quartz near windows and sliders. Condensation forms on cold quartz surfaces, and Pacifica’s salt film bonds to the stone. It won’t wipe off with standard cleaners. We professionally polish those surfaces and can advise on placement or sealing to slow recurrence.
- Wicking toe kicks and back panels. Fog keeps subfloors damp in older Pacifica homes with raised foundations. Unsealed CGI toe kicks draw that moisture upward, softening the particle board from the bottom. We replace the affected unit and address the subfloor vapor issue, not just the symptom.
- Full kitchen remodels that uncover hidden frame rot. When we pull old cabinets in Linda Mar or on the bluff-top streets, we routinely find rim joists and sill plates that are spongy from decades of fog. You can’t anchor CGI cabinets to compromised framing and expect them to stay plumb. We fix the structure first.
CGI Service in Pacifica: What Local Conditions Mean for Your Equipment
In Pacifica’s Linda Mar and the bluff-top streets, deck ledgers and joist hangers corrode from the underside because the fog never fully dries the framing. We’ve pulled apart decks that looked solid from above and found the hangers flaking away to nothing underneath. The same process attacks any exterior wall where your kitchen or bath sits. When a CGI remodel opens an exterior wall, we stop and inspect the hidden structural members. Too many Pacifica homes have rim joists and wall plates that are quietly failing behind the drywall, and bolting expensive cabinetry to that framing is the coastal equivalent of pouring a foundation on sand. That’s why our Pacifica CGI projects—and our CGI repair in South San Francisco—always begin with the wall assembly, not the cabinet box. It’s the single largest difference between a kitchen that lasts here and one that needs a redo in six years.
CGI Models & Products We Service in Pacifica
We install, repair, and reface the full residential CGI lineup: Euro-style frameless cabinets, Shaker cabinetry, quartz countertops, and granite countertops. On the repair side, we use OEM CGI hardware and touch-up materials whenever they’re available to preserve factory fit and finish. But we also stock high-quality aftermarket corrosion-resistant hinges and slides that outperform standard OEM parts in Pacifica’s salt air. When a CGI cabinet box is soft or delaminated, we replace the affected unit rather than patch it. Honest repair-vs-replace guidance means you don’t pay for a repair that will fail again next fog season.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Pacifica
CGI work in Pacifica typically falls into these ranges, depending on scope and the condition of the framing we uncover:
| Project | Typical Range |
|---|---|
| Kitchen Remodel with CGI Cabinets & Counters | $14,000 – $45,000 |
| CGI Cabinet Installation | $4,000 – $13,000 |
| CGI Quartz or Granite Countertop Installation | $2,000 – $6,500 |
What drives the final number: wall rot repair, structural reinforcement, hardware upgrades, and how much of the existing layout can stay. A free estimate includes a framing inspection and a written line-item quote, so you know exactly what you’re paying for before work starts. Call (855) 473-5620 to schedule yours.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area and know this community well as your Pacifica General Contractor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Pacifica
They will if the wall behind them is properly sealed and the hardware is upgraded for salt air. Standard CGI cabinets use quality materials, but no cabinet box is immune to Pacifica’s persistent moisture. We seal every penetration, replace standard hinges and slides with corrosion-resistant hardware, and treat the framing before installation. That’s the difference between a kitchen that lasts and one that swells in two seasons. Call (855) 473-5620 to get a Pacifica-specific assessment of your kitchen.
Salt air forms a film that bonds with condensation on cold quartz surfaces, especially near windows and sliding doors. You’ll notice cloudy etch marks that don’t respond to standard cleaners. We polish those out professionally and can recommend sealing and placement adjustments to slow the buildup. For an exact quote on countertop restoration or replacement, call (855) 473-5620 – estimates are free.
Cabinet installation alone typically doesn’t require a permit in Pacifica. But if your project involves moving plumbing, altering electrical, or opening load-bearing walls, you’ll need city permits. We handle the permit paperwork and inspections when we manage the full remodel, so you’re not navigating Pacifica’s building department alone. Call (855) 473-5620 and we’ll tell you exactly what your project requires.
Swollen cabinet boxes along sink runs and exterior walls. The fog keeps those areas damp year-round, and the back panel of a cabinet acts like a sponge. We recently completed a full kitchen remodel in a 1960s Westview home where the CGI Shaker cabinets had delaminated along the sink wall from years of fog-driven moisture. After replacing the damp drywall and treating the framing, we installed new CGI frameless cabinets with stainless-steel hardware and a CGI quartz countertop, then sealed every penetration with marine-grade caulk. That kitchen now stands up to Pacifica’s salt air and wet winters. Call (855) 473-5620 if your cabinets are showing the same signs.
We can match existing CGI door styles and finishes in many cases, depending on the age of the line and your current layout. Frameless and Shaker profiles are still widely available, which helps with matching. If a perfect match isn’t available, we’ll give you honest options: reface the entire run, blend with a complementary finish, or replace the affected units. Call (855) 473-5620 and we’ll take a look at what’s in your kitchen now.
Service Areas Near Pacifica
Our CGI service extends beyond Pacifica’s 94044 ZIP to the communities along the coast and over the hill. We serve homeowners in Visitacion Valley, Colma, Daly City, South San Francisco, and San Bruno. If you’re near the coast or the Bayshore and need CGI cabinetry or countertops, call us and we’ll confirm whether your project is in our current schedule.
Book Your CGI Service in Pacifica Today
If it’s not built right the first time, you’re just paying for it twice. That’s the rule we work by in Pacifica, where fog and salt air punish shortcuts. Whether you need a single cabinet box replaced or a full kitchen remodel with CGI quartz, call (855) 473-5620 for a free estimate. We’ll look at the framing, not just the finish.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Pacifica and the San Mateo County coast with whole-home remodeling that accounts for fog, salt air, and the framing behind your walls.