Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Francisco, CA | San Bernardino Contractors
We provide independent CGI cabinet installation, repair, and full-kitchen construction across San Francisco’s residential ZIPs, from the fog-belt rows of the Sunset to the Victorian flats of the Mission. The single thing that makes our CGI sales & service work different here is that we build around the city’s party-wall, seismic, and moisture realities first, then spec the box, door, and hardware to survive them. Ruben Castillo, our owner, learned framing and finish work on tight lots where a quarter-inch sag changes how every door hangs. If you’re planning a CGI kitchen, a cabinet reface, or a countertop run in San Francisco, call (855) 473-5620 for a free estimate.
Why San Francisco Residents Choose Us for CGI Service
Most cabinet shops know the CGI catalog. Fewer know what a CGI thermofoil door does after three fog seasons against an uninsulated rear wall in the Inner Sunset, or how a pre-1940s Edwardian floor rackes a frameless box out of square by the second winter. We do, because we’ve corrected both across San Francisco service area kitchens for years. Ruben grew up in the Westside, spent weekends watching his uncle reroof houses and frame garages, then studied construction technology at San Bernardino Valley College, paying real attention to load paths and moisture movement. That background shapes how we order CGI parts here: original-equipment doors and boxes when a run gets extended or matched, stainless or corrosion-resistant aftermarket hinges and slides where the factory hardware is the weak link in a damp house. We’re an independent shop, not affiliated with or authorized by CGI, so our only loyalty is to making your cabinet run close flush and stay that way.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Francisco
- Thermofoil and laminate delamination at the top rail. Fog-belt kitchens with uninsulated rear walls hold damp air against cabinet backs that never fully dry. The thermofoil lifts at the top rail first, then peels down the door face. We strip, reface, or replace the affected doors and address the moisture source so it doesn’t come back.
- Racked cabinet boxes on out-of-level floors. Pre-1940s wood-frame rows in San Francisco settle. A CGI box installed square on a floor that’s since sagged a half inch will bind doors and wander reveal lines within a season. We re-square, shim, and re-hang before ordering new doors, because new doors on a racked box is just paying twice.
- Swollen particleboard and MDF bottom panels. Wind-driven rain finds failed flashing around a rear addition or a party-wall penetration, and the sink base or end panel wicks it up. We replace the damaged carcase, correct the flashing, and use sealed edges where moisture will always be present.
- Corroded hinges and slides on ocean-facing walls. Cheap steel hardware on a west-facing Edwardian kitchen near the fog will seize. Drawers squeal, doors stop self-closing. We swap in stainless or corrosion-resistant soft-close hardware and the run behaves like new.
- Doors that no longer close flush after wall work. San Francisco kitchen remodels often mean opening a party wall or re-framing a rear addition. When the framing isn’t right, the cabinet line suffers. We fix the structure first, then the cabinetry.
CGI Service in San Francisco: What Local Conditions Mean for Your Equipment
Nearly every San Francisco kitchen we gut inside ZIPs 94102 – 94109 sits on a narrow 25-foot lot with shared party walls. Any scope that touches a wall, adds an island, or reroutes a vent can require neighbor sign-off and a Planning historic-resource review before DBI will issue the permit. That means the cabinet order isn’t the long-lead item, the entitlement is. A homeowner might wait six weeks for a Planning determination, then discover the run they spec’d has to shift three inches because the party wall can’t be notched for a vent. In that gap, moisture keeps doing its work on old thermofoil. We sequence projects around the entitlement, not the other way around: order what can be ordered, prep what can be prepped, and set boxes only after the permit clears. On a 25-foot-wide Edwardian row house in the Inner Sunset, our crew opened a rear kitchen wall for a CGI in Mission District cabinet run and found the original party-wall framing had pulled away, letting fog-belt damp creep into the old thermofoil backs for years. We re-squared and re-shimmed the floor, sistered the damaged framing, worked with the neighbor on party-wall access, then set new CGI shaker boxes with stainless hinges and a quartz counter, and the doors finally closed flush.
CGI Models & Products We Service in San Francisco
We work on the CGI service in Noe Valley cabinetry lines that show up most in San Francisco housing: Euro-style thermofoil and full-overlay runs in condo and loft refits, shaker-profile and recessed-panel painted lines in Victorian and Edwardian renovations, quartz and granite countertop programs specified alongside cabinet runs, and frameless melamine and plywood-box modular lines in soft-story apartment kitchenettes. For parts, we order original-equipment CGI doors and boxes when a run is being extended or matched, and spec quality aftermarket hardware where the factory part is the weak link in a damp house. On a sound CGI box in a dry interior wall, we reface and re-hang rather than tear out. When the carcase itself is swollen, delaminated, or racked beyond shimming, we say so and replace it.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Francisco
What you’ll pay depends on how much of the existing run can be saved and what the wall behind it looks like once we open it up. Here are the line-item ranges we quote for CGI-related work in San Francisco.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
A free estimate includes a site visit, measurements, and a written line-item quote so you know exactly what you’re paying for before any work begins. Call (855) 473-5620 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re based in the San Francisco area and know this community well as a San Francisco General Contractor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Francisco
Yes, if any part of the scope touches a shared wall, reroutes a vent through it, or requires access to the neighbor’s side for flashing or framing, you’ll likely need a neighbor sign-off before DBI issues the permit. We handle the neighbor communication as part of our Visitacion Valley CGI service work, and we sequence the cabinet order around whatever the entitlement timeline allows. Call (855) 473-5620 if you want us to walk your specific kitchen through the process.
Rarely without modification. Older San Francisco rooms are rarely square, floors have settled, and walls wander. We shim, re-square, and sometimes order custom filler panels or modified end panels so the CGI run fits the room rather than fighting it. That’s the difference between doors that close flush and doors that bind a year later.
That’s fog-belt moisture. Warm, damp air from cooking and the marine layer sits against uninsulated rear walls, and the cabinet back never fully dries. Thermofoil lifts at the top rail first. We fix the door and the moisture source, because refacing alone just repeats the failure in another few seasons.
Often yes, especially for visible exterior changes or interior work in a designated historic resource. The Planning Department determines whether design review applies, and the answer affects how we phase your project. We’ve worked through enough of these in San Francisco to predict most of the friction points before they stall a cabinet order.
No. We are an independent San Francisco contractor. We are not affiliated with, authorized by, or endorsed by CGI. What that means for you is that we have no incentive to sell you a CGI part where a better aftermarket option exists, and no reason to defend a factory part that fails in a damp house.
Service Areas Near San Francisco
We handle CGI cabinet and kitchen work across San Francisco proper, including the Sunset, the Richmond, the Mission, SoMa, and the Financial District, plus nearby CGI service in Chinatown and CGI service in Tiburon and surrounding areas. If your project sits on a narrow lot with a party wall, we’re familiar with that exact permitting path.
Book Your CGI Service in San Francisco Today
If your CGI cabinets are peeling, binding, or just tired, call (855) 473-5620. We’ll schedule a free estimate, measure your kitchen, and give you a written quote with real numbers. If it’s not built right the first time, you’re just paying for it twice.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving San Francisco.