Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Wrightwood, CA | San Bernardino Contractors
We provide independent CGI cabinet, countertop, and surface installation across Wrightwood, CA. The one thing that separates our CGI work here from everywhere else we serve is the mountain: at roughly 6,000 feet, nearly every kitchen we touch is a second home, cabin, or vacation rental that sits unheated for weeks between visits. Freeze-thaw cycles and vacant-house moisture patterns change how CGI products hold up, and we plan every Wrightwood job around that reality. Call Ruben Castillo at San Bernardino Contractors at (855) 473-5620 to schedule a free estimate.
Why Wrightwood Residents Choose Us for CGI Service
We’ve installed and repaired CGI cabinetry and countertops in the San Gabriel Mountains long enough to know what fails here and why. Most valley contractors never see thermofoil peeling at the seams because they never deal with a cabin that drops to 40 degrees inside between rental seasons. Ruben grew up in San Bernardino’s Westside watching his uncle reroof houses and frame garages on a tight budget, then completed his construction technology training at San Bernardino Valley College. That background taught us to read load paths and understand moisture movement before we ever touch a cabinet box. We’re an independent contractor, not affiliated with or endorsed by CGI, and we make our CGI sales & service decisions the same way a qualified independent shop should: source the right parts, do the repair that makes sense, and replace when patching would just fail again.
Wrightwood homeowners call us because we don’t flinch at steep driveways, snow-loaded roofs, or kitchens that haven’t been heated since Thanksgiving.
Styles & brands we work with
Common CGI Construction Problems We Solve in Wrightwood
- Thermofoil and laminate door delamination. Wrightwood cabins swing between heated winter weekends and cold vacant stretches. That humidity cycle makes CGI thermofoil peel at the edges far faster than in a San Bernardino valley kitchen. We replace delaminated doors or reface the run when the boxes are still sound.
- Out-of-plumb cabinetry on sloped lots. In 1950s – 1970s A-frame and cabin kitchens, CGI boxes were often set against exterior walls that were never close to plumb. Door reveals rack, hinges pull out of the frame, and the whole run drifts. We reset and shim boxes, rehang doors with fresh hardware, and get the reveals even again.
- Swollen particleboard bases and toe kicks. Snow-load and ice-dam moisture gets behind exterior walls and wicks straight into particleboard-core cabinet bases. The toe kicks swell and the bottom panels crumble before anyone notices a leak. We replace water-damaged boxes with plywood-core units and fix the moisture path so it doesn’t repeat.
- Lifting countertop seams and laminate edges. Vacation-rental turnover and unheated shoulder seasons leave CGI countertop seams and laminate edges lifting where cabinetry was installed without a vapor or thermal break. We reset tops with a proper break so the next freeze-thaw cycle doesn’t pull the seams apart.
- Worn hinges and drawer slides from rental use. Wrightwood vacation rentals see more open-and-close cycles in a season than a primary kitchen sees in three years. We stock CGI-compatible OEM hinges and slides for fast turnaround and use quality aftermarket hardware when OEM lead times would stall a mountain build.
CGI Service in Wrightwood: What Local Conditions Mean for Your Equipment
Here’s the thing about Wrightwood that changes every CGI decision: this is a snow-country community, and nearly every project is a second home or rental that sits empty between visits. The house isn’t heated. Snow piles on the roof. Ice dams form. Moisture moves through the structure in ways a primary residence in Fontana or Rialto never experiences. For CGI cabinets and countertops, that means the subgrade preparation, the vapor break under the countertop, and the core material you select aren’t optional details. They’re the difference between a kitchen that holds up for a decade and one that needs a base run replacement after two winters.
We schedule around the compressed snow-free window, and we know what roads close when for CGI in Oak Hills and throughout the mountain region. That planning matters when you’re trying to get a kitchen done before the first storm locks the mountain down.
CGI Models & Products We Service in Wrightwood
We work on the full range of CGI products common in Wrightwood homes: Ready-to-Assemble (RTA) shaker and slab-front kitchen cabinets, CGI all-plywood and particleboard-core cabinet boxes with thermofoil or laminate doors, CGI quartz and granite countertop programs sold through dealer and big-box channels, and CGI vanity and bath cabinet lines used in cabin remodels. Our parts approach is simple: source CGI-compatible OEM hinges, drawer slides, and door fronts where available, and use quality aftermarket hardware when OEM lead times would stall a job on a snow-bound schedule. We repair boxes and reface doors when the carcass is sound. Swollen particleboard bases or delaminated thermofoil usually justify replacement over patching, because a patch on a water-damaged box is just a delay.
Our scope covers everything from Wrightwood service area cabinetry and countertops to full kitchen remodels under one contractor. If it’s not built right the first time, you’re just paying for it twice.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Wrightwood
Here’s what CGI cabinet and countertop work typically runs in the Wrightwood market. These ranges reflect the mountain conditions: sloped lots, older framing, and material handling on snow-country roads all push costs toward the upper end.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
What drives the number: cabinet core material, whether we’re refacing or replacing, countertop material and edge profile, and how much shimming and resetting the existing framing needs. Every estimate includes a written line-item quote with no change orders. Call (855) 473-5620 to get exact numbers for your Wrightwood kitchen.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Wrightwood
No. We are an independent contractor, not authorized, affiliated with, or endorsed by CGI. We buy and install their products the same way any qualified independent shop does, and we source OEM-compatible parts where available. Independence means we recommend what’s right for your Wrightwood cabin, not what a manufacturer program tells us to push.
We use CGI-compatible OEM hinges, drawer slides, and door fronts where available, and quality aftermarket hardware when OEM lead times would stall a mountain build. For Wrightwood’s short snow-free window, the right call is usually whatever gets the job done correctly before the roads close. Call (855) 473-5620 and we’ll walk you through what your specific job needs.
Quartz makes the most sense for a Wrightwood vacation rental, because it’s non-porous and handles the freeze-thaw humidity swings better than natural granite with open pores and seam movement. The catch: the seam and the vapor break underneath matter more than the material choice. If either is done wrong, you’ll see lifting edges after two winters. Call (855) 473-5620 for a quote that includes proper subgrade preparation.
Most door refacing and hardware replacement work runs two to three days once materials are on site, whether in Wrightwood or with our CGI in Phelan. Full cabinet replacements and countertop installs typically take one to two weeks, and we schedule everything inside the snow-free window so your job doesn’t get stranded by a closed mountain road.
No. We give written line-item quotes and don’t do change orders. The only exception is if we uncover hidden water damage or structural problems behind the cabinets that weren’t visible during the estimate, and in that case we’ll show you exactly what we found before any extra work starts.
Service Areas Near Wrightwood
While Wrightwood is our mountain focus, our CGI service extends down into the Inland Empire. We handle cabinet and countertop work in Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy. If you’re in Calimesa, see our CGI service in Calimesa page. Yucaipa homeowners can find details on our CGI service in Yucaipa page.
Book Your CGI Service in Wrightwood Today
Wrightwood’s snow-free window doesn’t wait. Call Ruben Castillo and the San Bernardino Contractors team at (855) 473-5620 to schedule your free estimate and get on the calendar before the first storm closes the road. We’ll give you a written line-item quote and a straight answer on what your CGI kitchen actually needs.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Wrightwood and the surrounding mountain communities, including San Antonio Heights CGI service.