CWS Construction Service Nationwide

Why San Bernardino Homeowners Choose CWS Construction

We provide independent CWS cabinet service in San Bernardino, from full kitchen builds to refacing, hardware upgrades, and countertop and backsplash work that ties the whole room together. What sets our CWS work apart is that we know these cabinet lines at the failure-point level: which door styles peel, which glides wear out first, and which repairs actually hold up in this valley’s dry heat and wide temperature swings. We’re not a CWS dealer. We’re a San Bernardino contractor who has worked on enough CWS kitchens across 92401, 92402, 92403, and 92404, plus CWS in Fontana and nearby cities, to tell you straight whether a cabinet is worth saving or ready for replacement. Call (855) 473-5620 and we’ll look at your kitchen and give you an honest answer.

Call (855) 473-5620

As an independent CWS service provider, we carry no obligation to push new cabinets when a reface or hardware swap makes more sense. Your kitchen, your budget, your call. You pick the brand and finish level. We handle the build.

Why Trust San Bernardino Contractors for Your CWS Construction?

Ruben Castillo grew up in San Bernardino’s Westside, where he spent weekends watching his uncle reroof houses and frame out garages. That hands-on education stuck with him. He went on to complete construction technology training at San Bernardino Valley College, where he got serious about reading plans, understanding load paths, and not cutting corners on anything structural. We’ve carried that same discipline into our cabinet work.

What does that mean for your CWS kitchen? It means we treat cabinet installation like structural work, because in San Bernardino’s older homes, it often is. Floors in 1950s and 1960s tract houses have settled. Walls are rarely plumb. A cabinet run installed without shimming and scribing to the actual floor and wall conditions will rack, bind, and fail early. We level, shim, and scribe every run. We check for water damage behind the old boxes before we set new ones. We don’t install over rot. If it’s not built right the first time, you’re just paying for it twice.

We use OEM-compatible CWS hardware where it matters, and aftermarket upgrades where the originals were underbuilt. And we show up when we say we will. Most of our San Bernardino work comes from referrals, neighbors on the same block who watched our crew clean up after themselves and finish on schedule.

Common CWS Construction Problems We Fix in San Bernardino

• Thermofoil peeling on CWS Fashion and Designer Series doors and drawer fronts. San Bernardino’s summer heat, which regularly pushes past 100°F, accelerates thermofoil delamination, especially on cabinets near ovens, dishwashers, and south-facing windows. The vinyl layer lifts at the edges first, then curls and cracks. We replace the affected doors with CWS-compatible fronts or upgrade the whole kitchen to painted maple if the peeling is widespread.
• Drawer glides that wear out or break under daily use. Original CWS side-mount glides in older kitchens are often nylon-roller units that lose their bearings after a decade or two. Drawers stick, tilt, or drop off the track entirely. We replace them with full-extension soft-close undermount glides that carry more weight and close like a modern kitchen should.
• Soft-close hinges that lose tension or snap. The hydraulic piston inside a soft-close hinge is a sealed unit. When it fails, the door slams or the hinge arm breaks at the cup. We stock replacement hinges that fit CWS face-frame and frameless door profiles, and we’ll swap out entire banks of hinges so the whole run feels consistent.
• Water damage and swelling at the toe kick and sink base. In San Bernardino’s older homes with original galvanized plumbing, slow leaks under the sink go unnoticed until the cabinet box swells and delaminates. We cut out the damaged section, reinforce where the structure allows, and if the box is too far gone, we’re honest about replacement being cheaper than a patch job that’ll fail in two years.
• Misaligned doors and faces after house settling. The flat west and central San Bernardino grid sits on soft alluvial soils. Houses move. Cabinet doors that once aligned now catch, bind, or hang crooked. We adjust hinge tolerances and rehang doors, and if the boxes themselves have racked, we re-level the run before the faces go back on.

CWS Parts & Our Repair-vs-Replace Approach

We source OEM CWS hardware when it makes sense for a direct replacement. For drawer glides and hinges, we often recommend high-quality aftermarket components that outperform the originals: full-extension undermount glides rated for 75 to 100 pounds, soft-close hinge banks with adjustable tension. The aftermarket hardware costs less than OEM and carries the same or better duty rating because it’s built for commercial kitchen use.

The repair-versus-replace decision comes down to the boxes. If your CWS cabinet boxes are square, dry, and structurally sound, we recommend refacing or hardware upgrades over full replacement every time. New doors and drawer fronts, new glides and hinges, and you’re looking at a kitchen that feels brand new for a third of the cost of a full tear-out. If the boxes are swollen at the sink base, delaminating along the toe kick, or racked from settling, we’ll tell you that replacement is the honest call. We don’t patch what can’t hold. Call (855) 473-5620 if you’re not sure which camp your cabinets fall into.

Our CWS Service Process – Step by Step

1. 1
   Diagnosis. We inspect every cabinet box, every door and drawer front, and all hardware. We check for water damage, settling, and hinge fatigue. You get a written list of what’s failing and what’s still solid. No guesswork.
2. 2
   Repair or install plan. If we’re refacing, we measure for CWS-compatible fronts and confirm finish matching. If we’re replacing, we pull dimensions for the new run and check the floor and walls for level. San Bernardino’s older homes rarely have a level floor, so we plan for shimming and scribing before we order anything.
3. 3
   Installation. We set boxes level and square, shim where the framing requires it, and scribe fillers to the actual wall. Doors and drawers go on last, and every hinge and glide gets adjusted until the action is consistent across the run.
4. 4
   Testing and walk-through. We open every door and drawer, check soft-close function on every unit, and run a level across the tops. We walk you through what we installed and why. If something isn’t right, we fix it before we leave.

CWS Products We Service & Install in San Bernardino

We work on CWS Shaker Series cabinets in maple and painted finishes, Raised Panel Series in oak and cherry, and Fashion and Designer Series thermofoil and laminate lines. We also handle CWS Semi-Custom configurations ordered through local showrooms. We stock common CWS-compatible hinges, drawer glides, and touch-up kits locally, which means most hardware swaps and hinge bank replacements happen in a single visit. For full refacing jobs, we order CWS-compatible door and drawer fronts to match your existing finish and profile.

We Also Service These Brands

CWS isn’t the only cabinet line we work with. Our San Bernardino projects regularly include KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz countertops, and Kohler plumbing fixtures. If your kitchen pulls from multiple manufacturers, one crew handles it all. No subcontractor shuffle.

FAQs – CWS Construction Service in San Bernardino

Can you match my existing CWS cabinet finish when refacing? Yes, in most cases we can match CWS finishes across the Shaker, Raised Panel, and Fashion Series lines. We send finish samples and door profiles for confirmation before we order anything, so there are no surprises when the new fronts arrive.

My CWS cabinets have thermofoil peeling – can it be repaired or do I need new doors? Thermofoil peeling cannot be reliably glued back down. The vinyl has already delaminated from the substrate, and adhesives won’t hold up to San Bernardino’s heat. We replace the affected doors and drawer fronts with CWS-compatible fronts, or upgrade the whole run to painted maple if the peeling is widespread.

Do you install CWS cabinets purchased from a big-box store? We do. We’re an independent contractor, not a CWS dealer, so we’ll install CWS cabinets you’ve already purchased or help you coordinate the order. One caveat: we inspect flat-packed cabinets for shipping damage and confirm all hardware is present before we start, because missing hinges and damaged corners slow the whole job down.

What’s the typical lead time for CWS cabinet refacing in San Bernardino? Most refacing jobs in San Bernardino take two to three weeks from measurement to completion. Door and drawer front fabrication is the longest lead item. Hardware-only upgrades, like replacing glides and hinges, can often be done the same week. Call (855) 473-5620 and we’ll give you a real timeline for your kitchen.

Can you upgrade my CWS cabinets with soft-close hinges and drawer glides? Yes. We replace original CWS hinges and glides with upgraded soft-close hardware matched to your door profile and drawer configuration. This is one of the highest-value upgrades for older CWS kitchens, and most are done in a single visit.

How much does CWS construction cost in San Bernardino?

These are the ranges we see across San Bernardino’s housing stock, from smaller 1950s tract kitchens in the numbered streets to larger remodel jobs in the foothills and CWS in Glen Avon. Your exact cost depends on the size of your kitchen, the finish level you choose, and whether we’re refacing or doing a full tear-out. Call (855) 473-5620 for a written line-item estimate. Estimates are free.

Book Your CWS Service in San Bernardino, CA

If your CWS cabinets are peeling, sagging, or just look tired, we’ll give you a straight answer and a written estimate. We recently refaced a CWS Fashion Series kitchen in a 1980s San Bernardino home where the thermofoil had peeled off several doors and the drawer glides were failing. Our tech replaced the damaged doors with new CWS-compatible fronts and installed upgraded soft-close hinges and glides, then topped the existing boxes with quartz countertops and a subway tile backsplash—similar to our CWS repair in Bloomington projects. The homeowner got a like-new kitchen without the cost of full cabinet replacement. Call (855) 473-5620 to schedule your free estimate.

Written by Ruben Castillo, Owner at San Bernardino Contractors, serving San Bernardino since 2004.