Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Los Gatos, CA | San Bernardino Contractors
We’re an independent construction firm that works on Dvele prefab and panelized homes across Los Gatos and the surrounding Santa Clara Valley. The thing that separates Dvele work here from other towns: nearly every hillside rebuild in the 95033 foothills has to clear Santa Clara County fire-safe construction standards and a geotechnical report before the first module ever gets set. That’s the ground we work on every day. If you’re planning a Dvele addition, ADU, or full rebuild in Los Gatos, call (855) 473-5620 for a free estimate.
Why Los Gatos Residents Choose Us for Dvele Service
We read Dvele’s panel drawings. We know how their factory-finished wall, floor, and roof cassettes are supposed to tie together, and we know where they fall short on a steep, tree-covered Los Gatos lot. Ruben Castillo, our owner, spent years learning load paths and structural detailing the hard way, and he’s carried that into how we handle every Dvele shell we touch. We’re not a Dvele dealer and not a factory rep. We carry the permit through Los Gatos and Santa Clara County under our own license, which means we answer for the foundation, the shell set, the envelope, and the finish work as one contractor. If a panel joint fails after a wet winter, you don’t get bounced between a factory rep and a site crew. You call us.
We stock Dvele OEM panels, connectors, and factory finish components where they exist. Where the factory part is obsolete or a site condition calls for something better, we spec equivalent hardware and tell you exactly why. If it’s not built right the first time, you’re just paying for it twice. That’s been our rule on job sites across the Santa Clara Valley, including Dvele repair in Monte Sereno, since day one.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Los Gatos
- Panel-to-foundation load path issues. We see this most often when a Dvele shell gets set over older unengineered footings on a hillside rebuild. The factory design assumes a level, engineered base. The lot wasn’t. You get uneven settlement, cracks at the panel seams, doors that stop latching. We re-engineer the foundation connection and correct the load path before the finish work goes in.
- Moisture and seam failure at module joints. Winter rain on a steep Los Gatos lot finds every weak seam. The Dvele envelope meets a gutter run, the gasket wicks water into the wall cavity, and six months later you’re chasing mildew inside the panel. We open the seam, replace the gasket, re-flash the joint, and fix the gutter tie-in that caused it in the first place.
- Ember-driven envelope degradation. The hills above Los Gatos sit in a wildland-urban interface where the base Dvele package often doesn’t meet local fire code. Vents, eave gaps, and wall penetrations that passed factory spec fail WUI inspection. We retrofit ember-resistant vents, seal penetrations, and upgrade the envelope before the town signs off.
- Design-review mismatch on rebuilds. A Dvele factory finish package that looked clean in the catalog doesn’t always pass Almond Grove or downtown Los Gatos design review. Cladding and trim changes land after the shell is already ordered. We handle the review process early so you’re not eating change orders on factory-finished panels.
- Drainage and erosion undercutting the foundation. Deforested hillside lots in Los Gatos shed water fast in winter. A Dvele foundation set without proper drainage erodes, settles, and starts pulling panels out of plane. We regrade, add drainage, and stabilize the soil before it becomes a structural problem.
Dvele Service in Los Gatos: What Local Conditions Mean for Your Equipment
Los Gatos rebuilds on hillside lots in the 95033 foothills run into a double gate that doesn’t exist in most Santa Clara Valley towns. First, Santa Clara County requires fire-safe construction standards: Class A roofing, ember-resistant vents, non-combustible siding on the lower walls. Second, the county wants a geotechnical report on any slope flagged as landslide-prone before a permit is issued. A Dvele factory shell—whether for Dvele in Lexington Hills or Los Gatos—arrives with its own roof assembly, its own wall cassettes, and its own foundation assumptions. None of those were drafted for a 30-degree lot with serpentine soil and a downhill neighbor’s property line 40 feet away. So before we can set the first module, the shell design, the roof, and the foundation all go through review. We handled a rebuild above town where the geotech report forced a pier-and-grade foundation instead of a slab-on-grade the factory drawings assumed. That change rippled through the panel connections, the plumbing chases, and the eave detailing. The house finaled with fire-safe detailing intact and the panels square. That’s the reality of Dvele construction in Los Gatos, and no generic Dvele page will tell you that.
Dvele Models & Products We Service in Los Gatos
We work on the full Dvele line as it shows up at job sites in Los Gatos: single-family prefab homes, R&D and production-build panelized shell packages, and factory-finished wall, floor, and roof cassettes delivered to the site. Our approach stays consistent: OEM panels and connectors where the factory part is right for the site, and properly rated equivalents where a hillside condition or a Los Gatos design-review change demands something stronger. We keep common connectors, sealants, and flashing on hand for the calls that come out of the hills, which means less waiting on factory freight when a seam opens after a storm. For full Dvele builds and panelized additions, see Dvele sales & service for the broader scope of what we cover.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Los Gatos
Most Dvele work in Los Gatos and nearby Dvele service in Cambrian Park falls into a few predictable buckets. Design review, slope conditions, and the cost of crane time on a steep lot all move the number. Here’s what current market pricing looks like:
| Service | Typical Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost: the geotech report if the lot is flagged, WUI fire-safe upgrades on the envelope, design-review revisions on cladding and trim, and whether the factory shell needs re-engineering before the modules go in. A free estimate includes a site walk, a look at your foundation and drainage, and a written line-item quote. Call (855) 473-5620 to set one up.
Serving Los Gatos, CA — Our Local Coverage Area
We’re based in the Los Gatos area and know this community well, and we also provide Dvele service in Saratoga. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Los Gatos
Yes. We bring the ember-resistant vents, Class A roof assembly, and non-combustible lower-wall cladding spec in as part of the rebuild. Most standard Dvele shell packages need envelope upgrades to pass WUI inspection in the 95033 foothills, and we handle that before the permit review. Call (855) 473-5620 for a straight answer on your specific lot.
A Dvele-based home addition in Los Gatos typically lands between $45,000 and $130,000. An ADU built on a Dvele panelized shell runs $90,000 to $220,000 depending on slope, soils, and how much fire-safe detailing the county requires. The geotech report and design review both move the final number. Call (855) 473-5620 for an exact quote on your property.
It usually does. Los Gatos and the Almond Grove historic district take cladding, trim, massing, and roofline seriously. A factory Dvele finish package rarely passes as-is. We pull the design-review process forward so changes happen before the shell is ordered, not after it’s sitting in your driveway. Call (855) 473-5620 and we’ll walk you through what review will want to see.
Not always out of the box. The base Dvele roof assembly often needs a Class A covering and ember-resistant edge detailing to satisfy the county in the hills. If a seam or eave fails after a wet winter, we repair the specific joint, re-flash it, and fix whatever drainage detail fed water into the panel. Call (855) 473-5620 for a roof assessment.
We start with drainage before we set the shell. On steep lots, that means surface swales, downspout tie-ins that push water away from the foundation line, and in some cases a retaining wall or engineered fill. If erosion has already started undercutting a foundation, we stabilize the soil, repair the footing, and re-level the panels before the problem turns structural. Call (855) 473-5620 to have us look at the slope.
Service Areas Near Los Gatos
We run Dvele service through the foothills and the flatlands around Los Gatos, including the hillside rebuilds in the 95033 ZIP and down into the Santa Clara Valley. We also cover Dvele service in Alum Rock and Dvele service in East Foothills for owners east of town. Full coverage details are on our Los Gatos service area page.
Book Your Dvele Service in Los Gatos Today
If you’re planning a Dvele rebuild, addition, or ADU in Los Gatos, or if a panel seam is failing on a hillside home, call (855) 473-5620. We’ll schedule a free estimate, walk the site, and give you a written line-item quote. No factory referral runaround. One contractor, every phase.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Los Gatos and the Santa Clara Valley.