Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Construction in Redwood Shores, CA | San Bernardino Contractors
ECO Window Systems service in Redwood Shores starts at $350 for basic hardware repair and runs up to $1,500 – $2,800 for full sash replacement on a typical 1980s – 90s stucco home, with complete window replacement ranging from $4,500 to $15,000 depending on elevation and frame condition. We’re an independent contractor serving Redwood Shores and the surrounding Peninsula, including ECO Window Systems in San Mateo, not an ECO Window Systems dealer, so our recommendation always puts your structure first. That matters here more than most places, because Redwood Shores sits on reclaimed bay marsh and filled sloughs, and the ground under many of these homes hasn’t finished settling. Call (855) 473-5620 for a free estimate on any ECO Window Systems project in Redwood Shores.
Why Redwood Shores Residents Choose Us for ECO Window Systems Service
We’ve pulled enough ECO aluminum sliders out of Redwood Shores walls to know exactly what happens when bay air meets builder-grade window flashing from 1987. The frames corrode, the weep channels crust over with salt, and the rough openings rack as the fill settles. Most window companies show up with a tape measure and a catalog. We show up with a four-foot level, because in Redwood Shores it’s rarely the window’s fault.
Ruben Castillo, our owner, has spent two decades reading plans, checking load paths, and refusing to cut corners on anything structural. He grew up watching his uncle reroof houses and frame garages, and that hands-on education shaped how we approach every window job: measure the framing, not the old sash, and never order product until you know what the wall is doing. We service all ECO Window Systems product lines in Redwood Shores with OEM-compatible parts and honest recommendations on when to repair versus replace. If it’s not built right the first time, you’re just paying for it twice.
Styles & brands we work with
Common ECO Window Systems Construction Problems We Solve in Redwood Shores
- Salt corrosion on west-facing ECO aluminum frames. The marine layer pushes salt-laden fog against the west elevations of Redwood Shores homes for six months a year. ECO aluminum frames on those walls corrode at the sill and fastener points while the glass stays perfectly clear. We replace corroded sill hardware, re-flash the opening, and treat the new fasteners for salt exposure before reinstalling.
- Fogged and whistling single-pane ECO originals. The 1980s and 90s tract elevations in Redwood Shores were built with original single-pane ECO aluminum units. Builder caulk joints cracked long ago as bay mud consolidated, and now those windows fog between panes, whistle in winter wind, and leak at the perimeter. We re-glaze when the frame is sound and replace when it isn’t.
- Sticking and warped vinyl ECO sashes. Fog-belt humidity does strange things to vinyl when the rough opening is out of square. In Redwood Shores, slab and raised-foundation movement from settling fill racks the openings on lagoon-front homes, so vinyl sashes bind and won’t close flush. We square the opening before we order new ECO vinyl units, not after.
- Clogged weep channels and rotted sill pans. Wind-driven debris and salt crust clog the drain channels on ECO units in Redwood Shores, especially on water-fronting streets. Water backs up into the wall cavity instead of draining out, and by the time you see staining on the interior drywall, the sill pan has been soaking for years. We pull the unit, clear the channels, and install a proper sill pan that actually drains.
- Lagoon-front siding and window junction leaks. On the lagoons, wind-driven rain hits the window-to-stucco junction at an angle the original flashing was never designed for. We re-flash that junction with materials that hold up to salt spray, then re-tape and re-flash the entire perimeter before resetting the ECO unit.
ECO Window Systems Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores was dredged and filled from bay marsh, and the ground under many lagoon-front homes is still consolidating. That’s not a generalization; it’s a structural fact that shows up in the window openings. On streets like Marlin Drive and along the actual lagoon edges, window and door openings rack out of square over time as the fill settles unevenly. We learned early to check framing level before ordering ECO units rather than measuring the old opening as-is. A window measured to a racked rough opening will be built wrong on day one. We square the opening, shim the frame to plumb and level, and then order the ECO unit to the corrected dimensions. It adds a day to the job and saves years of stuck sashes, failed seals, and water intrusion nobody can trace until the drywall stains.
On a lagoon-front street in Redwood Shores, our crew pulled a set of original ECO aluminum single-pane sliders that had corroded rollers and salt-crusted weep channels, and found the rough opening had racked slightly as the fill settled. We squared and re-flashed the opening with a proper sill pan, then set new ECO vinyl sliders with upgraded hardware so they shed bay moisture instead of trapping it. That job is why we never trust the old opening. Too many window contractors in the Bay Area treat every city like flat, dry ground, and Redwood Shores is neither.
ECO Window Systems Models & Products We Service in Redwood Shores
We service the full range of ECO Window Systems product that shows up in Redwood Shores housing stock: vinyl single-hung and slider replacement series common in the 1980s and 90s stucco tracts, original ECO aluminum-frame single-pane units still holding on in lagoon-front elevations, and the fixed picture windows and horizontal sliders used in the master-planned tract elevations. We source OEM ECO Window Systems hardware where it’s still available, and specify quality aftermarket sash, balance, and weatherstrip components when OEM supply is slow or discontinued. For Redwood Shores turnaround, we keep common ECO balance springs, roller assemblies, and weatherstrip in stock so most hardware repairs don’t wait on a parts order. We’ll also tell you straight when re-glazing and re-flashing an existing ECO frame is the better call than a full replacement, and when salt corrosion has eaten too far into the aluminum to make saving it worth the money.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Service Pricing in Redwood Shores
Window work in Redwood Shores follows a few patterns. Hardware repair is the cheapest fix, but it only makes sense when the frame is square and the glass is sound. Sash replacement runs more because the unit has to be built to the corrected opening dimensions. Full replacement is the biggest number, and it’s also the only right answer when salt corrosion on lagoon-front elevations has compromised the frame beyond repair.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost is what we find when we open the wall: the condition of the rough opening, whether the sill pan is rotted, how far the framing has racked, and whether BCDC permitting applies to your elevation. The free estimate covers all of it. Call (855) 473-5620 to schedule yours, and we’ll walk the house with you and put numbers to what we see.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well, and we also serve clients seeking Redwood Shores Home Remodeling. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ECO Window Systems Construction in Redwood Shores
Do Redwood Shores projects near the sloughs need BCDC approval before we replace windows?
Yes, in many cases. Bay Conservation and Development Commission jurisdiction extends well beyond the old shoreline, and any work on an elevation facing a slough or lagoon may trigger BCDC review before the city will issue a permit. We handle the paperwork, coordinate with the city’s design-review board, and build the schedule around permit timing so you’re not paying for a crew that can’t start, whether you need us in Redwood Shores or for ECO Window Systems in San Carlos. Call (855) 473-5620 and we’ll check your address against BCDC maps before you commit to a scope.
Why do the ECO windows on our west-facing wall corrode when the ones on the east side are fine?
It’s the marine layer and the bay. Prevailing wind pushes salt-laden fog against west-facing elevations in Redwood Shores six months out of the year, and the moisture sits on the aluminum frames and fasteners long after the fog burns off the rest of the house. East-facing walls stay dry. We treat new fasteners for salt exposure, upgrade the sill hardware, and re-flash with materials that don’t react with bay air. The fix holds; the original builder install didn’t.
Our lagoon-front sliders stick and don’t close flush – is the window bad or the wall?
Almost always the wall. Redwood Shores sits on reclaimed marsh and fill, and the ground under lagoon-front homes is still settling. The rough opening racks out of square over time, binding the sash. We check framing level before we blame the window, square the opening, and then set the unit so it operates like new. Sometimes the window is also worn out, but fixing the wall is step one. Call (855) 473-5620 and we’ll tell you what’s actually moving before we quote anything.
Can you match the original ECO frame profile and color on a Redwood Shores tract home?
We can match most original ECO profiles and colors from the 1980s and 90s tract builds, either through OEM where production still runs or through a quality aftermarket profile in the same dimension and finish. It matters on Redwood Shores streets where design review and HOA requirements hold you to the original elevation. We’ll bring samples to the estimate and match what’s on the house today.
Do you handle the stucco repair around a replacement ECO window?
Yes, and in Redwood Shores you need us to. The stucco-to-window junction is where water gets in on these homes, especially on lagoon and west-facing elevations. We cut the stucco back cleanly, set the new ECO unit with a proper sill pan and flashing tape, then patch and match the stucco texture so the elevation looks original. We also handle the exterior paint match. It’s all one project, one crew, and one accountable General Contractor in Redwood Shores. Call (855) 473-5620 for a free estimate.
Service Areas Near Redwood Shores
San Bernardino Contractors provides ECO Window Systems service across Redwood Shores and the surrounding Peninsula cities, including ECO Window Systems service in Belmont and ECO Window Systems service in Foster City. We also cover San Mateo, Redwood City, and San Carlos, bringing the same salt-air and settling-ground expertise to every job. See our Redwood Shores service area page for the full coverage map, or the ECO Window Systems sales & service page for everything we do with this product line.
Book Your ECO Window Systems Service in Redwood Shores Today
If your ECO windows are corroding, sticking, fogging, or leaking anywhere in Redwood Shores, call (855) 473-5620 for a free estimate. We’ll walk the house, level the openings, and give you a line-item quote with numbers that mean something. Window work here is never just window work. It’s about the ground under the house and the bay air against the walls, and we read both before we give you a price.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Redwood Shores with independent ECO Window Systems expertise.