Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Fontana, CA | San Bernardino Contractors
We provide independent Mr-Glass shower and glass installation service across Fontana, from frameless enclosures to tub-to-shower conversions. The one thing that separates our Mr-Glass work here: we plan every install around Fontana’s hard water, 100°F-plus summer heat, and the settled slabs common in older tract homes near the former Kaiser Steel site. That local planning is the difference between a glass enclosure that leaks in two years and one that holds up for twenty. Call (855) 473-5620 for a free estimate on any Mr-Glass project.
Why Fontana Residents Choose Us for Mr-Glass Service
Ruben Castillo grew up on the Westside of San Bernardino, spending weekends watching his uncle reroof houses and frame garages on whatever budget the job allowed. That early training taught him what holds up and what does not, and it’s the same standard we bring to every Mr-Glass enclosure we touch in Fontana. We know these shower systems down to the hinge torque specs and the sealant cure times. As an independent provider, we’re not tied to Mr-Glass corporate service protocols or parts markups. We stock OEM-equivalent hinges, sweeps, and seals that meet or exceed Mr-Glass specifications for fit, and we source factory-original parts when a match is critical. Fontana homeowners call us because we show up knowing their house type, their water chemistry, and their neighborhood. For more about how we work across the region, see our Mr-Glass sales & service page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Fontana
- Hard-water mineral etching on frameless glass. Fontana’s water carries a heavy mineral load, and we see the result on shower glass every week: a white haze that ordinary cleaning won’t touch. We polish what’s salvageable and replace glass when the etching has gone too deep to restore clarity.
- Sweep and seal failure on sliding doors from 100°F-plus summer heat. Thermal expansion in Fontana’s semi-arid valley pushes vinyl sweeps and seals past their tolerance, which is why so many sliding Mr-Glass doors start dripping at the bottom track by year three. We install high-temp-rated replacements that don’t shrink and gap.
- Hinge sag and screw pull-out in older tract homes. Many Fontana homes from the 1950s – 70s steel mill era have wall studs that were never blocked for the weight of a frameless glass panel. We open the wall, add blocking, and realign hinges so the door stops drooping and the screws stay put.
- Corrosion of metal frames and hinges from Santa Ana dust and winter moisture. Fontana’s fall winds drive abrasive dust into every seam, and the occasional winter rain adds moisture that accelerates corrosion on exposed hardware. We replace corroded hinges and frames with coated or stainless options suited to the local conditions.
- Improper silicone sealing that fails under high-heat cycles. A lot of Fontana shower installs were sealed with hardware-store silicone that cannot handle repeated 100°F-to-60°F swings. We strip the old bead and reseal with mold-resistant silicone rated for thermal cycling, which stops the black mold and the slow drip behind the glass.
Mr-Glass Service in Fontana: What Local Conditions Mean for Your Equipment
There’s a quirk to working in Fontana that most contractors from outside the city don’t plan for: the former Kaiser Steel mill site and the surrounding brownfields require extensive soil remediation and special foundation work before any new construction. When we install a Glen Avon Mr-Glass service frameless enclosure in Fontana’s core, near Slover Avenue or around the old mill footprint, we often coordinate with structural reinforcements or slab modifications already underway. A settled slab throws off the geometry of a frameless glass panel by a quarter inch or more, and that quarter inch becomes a leak at the bottom sweep. Ruben Castillo learned early in his construction technology training at San Bernardino Valley College that you don’t fight a bad foundation, you correct it first. So we measure the slab, shim the base track, and block the studs before the glass ever arrives. We recently installed a Mr-Glass 3/8″ frameless shower in a 1960s tract home near the former Kaiser Steel site. The original slab had settled, the studs were not blocked, and the previous contractor had simply forced the hinges into drywall anchors. After adding proper blocking and realigning the hinge geometry, we sealed the glass with mold-resistant silicone rated for high-heat cycles. That enclosure now handles Fontana’s hard water and summer temperature swings without a single drip. If it’s not built right the first time, you’re just paying for it twice.
Mr-Glass Models & Products We Service in Fontana
We install and service the full Mr-Glass residential line: frameless shower enclosures in 3/8″ and 1/2″ glass, semi-frameless sliding shower doors, custom mirrors and glass shelving, and tub-to-shower conversion glass panels. Our parts approach is simple: OEM-equivalent hinges, seals, and sweeps stocked locally for fast Fontana turnaround, with factory-original Mr-Glass parts ordered when the project calls for an exact match. We don’t push aftermarket parts that look close but wear out in eighteen months. If your glass is chipped or etched beyond polishing, we’ll tell you to replace it rather than pay for resurfacing that won’t last, especially on enclosures over ten years old. Our full service coverage in the area is outlined on the Fontana service area page.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Fontana
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the cost on a Fontana Mr-Glass project: the size and weight of the glass panel, whether we need to open walls for stud blocking, the condition of the existing slab, and the hardware finish you choose. A free estimate from us includes measurements, a slab check, and a written line-item quote so you know the number before we start. Call (855) 473-5620 to schedule yours, no pressure and no vague ranges.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and offer Home Remodeling in Fontana, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Fontana
Yes. We measure the slab first, shim the base track, and block the wall studs before the glass goes in. A settled slab is common in Fontana, especially near the former Kaiser Steel site, and the fix adds a day or two to the project but prevents the bottom sweep from leaking later. Call (855) 473-5620 and we’ll assess your slab during a free estimate.
We polish minor mineral haze with glass-safe compounds and replace glass that has etched beyond restoration. Fontana’s water is mineral-heavy enough that most enclosures need a protective coating or a squeegee routine to keep the glass clear between services. If your glass is already clouded, call (855) 473-5620 and we’ll tell you honestly whether it’s polishable or needs replacement.
Indirectly, yes. Santa Ana winds drive fine dust into hinges, tracks, and seals, and that grit accelerates wear on moving parts. We recommend annual hinge lubrication and seal inspection for Fontana homeowners in wind-exposed neighborhoods, and we use sealed bearing hinges on new installs. Call (855) 473-5620 if your doors are starting to grind or stick.
Most conversions run five to eight working days from tear-out to final silicone cure. If we need to open walls for stud blocking or address slab settlement, add one to two days. The glass is cut to field measurements, so no two Fontana projects are exactly alike. Call (855) 473-5620 and we’ll give you a day-by-day schedule after measuring your bathroom.
Yes. The glass and frame geometry doesn’t change based on flow rate, and we routinely install Mr-Glass enclosures alongside low-flow heads that meet current Inland Empire water standards. If you’re planning a showerhead swap along with your glass, we can coordinate both. Call (855) 473-5620 to talk through the full scope of your project.
Service Areas Near Fontana
We serve Fontana and the surrounding communities, including Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy. If you’re nearby, check our Mr-Glass service in Bloomington or Mr-Glass service in Rialto pages for specifics in those areas.
Book Your Mr-Glass Service in Fontana Today
If your Mr-Glass shower is leaking, etched, sagging, or just overdue for a reseal, we can schedule a free estimate this week across Fontana. Call (855) 473-5620 and talk directly with our crew, not a call center.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Fontana and the Inland Empire.