Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Boulder Creek, CA | San Bernardino Contractors
We provide independent PGT window and door installation, repair, and replacement throughout Boulder Creek. Most of the PGT work we handle here isn’t a simple swap-out. It’s tied to Chapter 7A fire-resistance requirements, steep canyon access, and homes rebuilt after the CZU Lightning Complex fire. If you need PGT service in Ben Lomond or Boulder Creek, call (855) 473-5620 for a free estimate, and we’ll walk you through what your specific property needs.
Our crews know PGT’s product lines the way a roofer knows flashing: PGT sales & service is what we do, from WinGuard impact-rated windows to the vinyl and aluminum series. San Bernardino Contractors is an independent contractor, not a PGT manufacturer affiliate or authorized dealer. That independence means we tell you when a sash can be salvaged and when the whole frame has to go, because we’re not trying to push a product line. Ruben Castillo leads our team, and he’s spent the better part of two decades doing whole-home remodels that hold up to heat, rain, and the occasional shake this region throws at you.
Why Boulder Creek Residents Choose Us for PGT Service
Boulder Creek homeowners have been through a lot since 2020. Hundreds of homes burned in the CZU fire, and the rebuilds that followed ran headfirst into Santa Cruz County’s building department, WUI inspection requirements, and supply chain headaches. When a homeowner calls us about PGT windows, they usually have two concerns: will these hold up to the next fire season, and will the county inspector sign off? We’ve handled both.
Ruben grew up watching his uncle reroof houses and frame garages on a shoestring budget in San Bernardino, then completed his construction technology training at San Bernardino Valley College, where he learned to read plans and understand load paths before he learned to cut corners on anything structural. That background shows in how we approach PGT work in Boulder Creek: we custom-flash every rough opening, we document materials for county inspections, and we don’t leave a window install that isn’t plumb and square.
We’re local to the Boulder Creek service area. We know the private roads, the long driveways, and the lots off Bear Creek Road where you can’t get a standard delivery truck turned around. That matters when you’re scheduling a window replacement on a home with one access point and a steep drop-off on the other side.
Styles & brands we work with
Common PGT Construction Problems We Solve in Boulder Creek
- Vinyl frames warping and cracking. Unshaded canyon lots in Boulder Creek bake all summer. PGT Vinyl Series frames that were fine in a coastal climate can warp or crack after years of direct sun and heat buildup, especially on south-facing elevations. We sometimes see sashes that won’t close flush or lock properly because the frame has moved.
- Fogged insulated glass units. PGT windows rely on double-pane seals, and years of thermal cycling in the Santa Cruz Mountains eventually breaks those seals down. Fogging between the panes isn’t just cosmetic; it means the insulating gas has escaped and the window’s thermal performance is shot.
- Water infiltration through rough openings. Heavy winter rain in Boulder Creek can push water through any flawed flashing detail. We’ve pulled trim off windows on older cabins and found rotted framing behind the opening because the original flashing wasn’t integrated with the house wrap or the slope drainage. Steep grades make this worse, because runoff channels right along foundation walls and window sills.
- Hardware corrosion and track debris. Wildfire ash and debris collect in window tracks and hinge mechanisms, and when that ash gets wet it turns corrosive. PGT window hardware can seize up or misalign, leaving windows that won’t lock or operate smoothly. Post-CZU, we see this constantly on homes that survived the fire but sat exposed to ash and smoke.
- Code-compliance gaps after rebuilds. We regularly see PGT units installed during a rushed post-fire rebuild that don’t meet current Chapter 7A ignition-resistance standards. That’s not a product flaw; it’s a build-quality issue. We correct these retrofits so the county inspection passes and the home is actually protected.
PGT Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Boulder Creek sits inside a wildland-urban interface zone where the building code changed fast after the CZU Lightning Complex fire. Chapter 7A of the California Building Code now requires exterior windows in new construction to be ignition-resistant and meet specific ember-penetration standards. That means if you’re rebuilding on a burned lot, you can’t just throw in any double-pane window and walk away. PGT’s WinGuard impact-rated line is a common choice here because it handles both impact and fire-resistance requirements, but the county wants documentation: product approvals, installation details, and evidence the glazing meets WUI criteria.
This is where independent PGT service matters. We’ve installed and serviced PGT products on enough post-CZU rebuilds in Boulder Creek to know what the Santa Cruz County building department looks for on the inspection card. When you replace PGT windows on an older cabin that predates the fire code, we’ll tell you what triggers a Chapter 7A upgrade and what doesn’t. When you’re building new, we’ll spec the right WinGuard series up front so you don’t get a correction notice after the windows are already in the wall.
On a steep lot off Bear Creek Road, we replaced a set of fogged PGT Vinyl Series windows in a rebuilt home that had survived the CZU fire but had original units installed during the rebuild, similar to PGT service in Lompico we handle on comparable hillside properties. The seals had failed within a few years. We upgraded to PGT WinGuard impact-rated windows with tempered glass to meet current WUI standards. Our crew custom-flashed each opening to handle the heavy runoff on that slope, and the homeowner now has clear glass and improved fire resistance. If it’s not built right the first time, you’re just paying for it twice.
PGT Models & Products We Service in Boulder Creek
We work on the full PGT lineup you’re likely to find in Boulder Creek: PGT Aluminum Series, PGT Vinyl Series, PGT WinGuard Impact Series, and PGT SolarZone. That covers everything from standard double-hungs on older cabins to impact-rated casements and sliders on post-fire rebuilds. We source OEM PGT parts whenever they’re available, because warranty compliance and exact fit matter. When OEM parts are discontinued for older units, we use high-quality aftermarket components that meet or exceed the original specs. Off-the-shelf hardware that doesn’t quite match the track geometry will fail in a mountain climate faster than a homeowner expects.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Boulder Creek
PGT work in Boulder Creek costs what it costs because of the site, not just the product. A window replacement on a flat suburban lot is a different job than the same replacement on a steep canyon parcel with limited staging and a long driveway. Here’s what our pricing looks like for the PGT services we handle most:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
What drives the number: how many windows, whether they’re standard vinyl or impact-rated WinGuard units, how accessible the openings are, and whether rough framing or flashing needs repair once we open the wall. Every estimate is free and includes a written line-item quote. Call (855) 473-5620 and we’ll get you exact numbers for your Boulder Creek property.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help, including PGT repair in Brookdale and surrounding areas.
FAQs – PGT Construction in Boulder Creek
If your project is new construction or a substantial remodel in a WUI zone, yes. Chapter 7A of the California Building Code requires ignition-resistant exterior windows that meet specific ember-penetration standards, and PGT WinGuard impact-rated windows satisfy that requirement. If you’re replacing existing windows in an older home that predates the current code, you may not be required to upgrade, but we’ll tell you whether your specific project triggers the requirement before you buy. Call (855) 473-5620 and we’ll assess your property against current Boulder Creek code requirements.
Fogging between the panes means the seal has failed and the insulating gas is gone; that window needs an IGU replacement. Warped or cracked vinyl frames usually mean full replacement, because the frame geometry is compromised. Sticky or corroded hardware can often be repaired with OEM PGT replacement parts. We assess the unit’s age, condition, and code compliance and give you an honest repair-versus-replace answer. Call (855) 473-5620 for a free estimate.
Yes. When we build a home addition in Boulder Creek, we match the existing PGT product line, frame color, and grid pattern so the new windows don’t look like an afterthought. If the original PGT series has been discontinued, we’ll spec the closest current PGT equivalent and explain the differences before you sign off. We handle additions from $45,000 to $130,000, windows included.
In unincorporated Santa Cruz County, window replacement typically requires a building permit, and any window in a WUI zone must meet Chapter 7A ignition-resistance standards unless it’s a like-for-like replacement that predates current code requirements. We pull the permits, document the product approvals, and handle the inspections. That’s part of the job, not an add-on. Call (855) 473-5620 and we’ll tell you what your specific project needs.
Felton PGT service covers the same WUI challenges: PGT WinGuard impact-rated windows are specifically designed for high-wind, impact, and fire-resistant applications, which makes them a strong fit for Boulder Creek’s WUI zones and winter rain. PGT Vinyl and Aluminum Series windows can also work here, but they need proper flashing and detailing to withstand heavy runoff on steep grades. We custom-flash every opening and use materials rated for the climate. Call (855) 473-5620 for an exact quote on your project.
Service Areas Near Boulder Creek
We handle PGT work throughout Boulder Creek and the surrounding Santa Cruz Mountains. If you’re nearby, we also cover PGT service in Saratoga and PGT service in Santa Clara. Mountain access, winding roads, and WUI requirements don’t change how we work.
Book Your PGT Service in Boulder Creek Today
Call (855) 473-5620 to schedule your free PGT estimate in Boulder Creek. We’ll inspect your windows, answer your code questions, and give you a written quote before any work starts. One contractor, every phase. You pick the brand, we handle the build.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Boulder Creek and the Santa Cruz Mountains.