Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in San Bruno, CA | San Bernardino Contractors
We provide independent Therma-Tru door installation and repair across San Bruno, including entry systems, patio doors, sidelites, and multipoint hardware. The thing that separates our Therma-Tru work in San Bruno from Therma-Tru service in Millbrae or every other city we serve is the ground itself: this town sits on the San Andreas Fault and bay-mud fill, so door frames rack, sills settle, and thresholds rot in ways South San Francisco never see. We build and service Therma-Tru doors to hold up against exactly that. Call (855) 473-5620 for a free estimate on any Therma-Tru project.
Why San Bruno Residents Choose Us for Therma-Tru Service
We handle Therma-Tru sales & service differently than a showroom does. Ruben Castillo, our owner, learned framing and concrete from his uncle on shoestring-budget jobs in San Bernardino’s Westside, then formalized it with construction technology training at San Bernardino Valley College. What that means for your San Bruno door: we don’t just swap slabs. We check the rough opening, the sill pan, the flashing, and the way the frame anchors to the wall. We spec genuine Therma-Tru OEM sills, sweeps, weatherstrip, and multipoint hardware wherever the model line still supports it. When a discontinued line makes OEM parts impossible, we use proven aftermarket seals and closers and tell you exactly why. We’re an independent contractor, not a Therma-Tru authorized dealer, which means our recommendation is based on what your house needs, not what a brand program tells us to push.
One contractor, every phase. From the roof down to the pavers, our crew handles the whole home, so when a door replacement turns into stucco repair, threshold reframing, or a siding tie-in, there’s no subcontractor shuffle. You pick the brand, we handle the build.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in San Bruno
- Fog-damp bottom rails and rotted thresholds. The marine fog belt off the Pacific keeps San Bruno cool and damp most of the year. Fiberglass slabs on Fiber-Classic and Smooth-Star doors delaminate at the bottom edge, sweeps go soft and moldy, and sill pans stay wet for weeks. We replace the sill, re-flash the threshold, and set a new slab with OEM weatherstrip before it spreads into the subfloor.
- Racked frames from pier-and-post settling. The flats west of El Camino Real are dominated by 1940s and 1950s ranchers on raised foundations. When posts and bolting settle, the rough opening racks slightly. A door that closed cleanly two winters ago now drags on the strike side and the deadbolt misses. We re-shim and re-anchor the frame, not just adjust the hinges.
- Chalked and peeling factory finishes on north and west elevations. Sun-starved elevations in San Bruno never fully dry out. The factory finish on Classic-Craft and Fiber-Classic slabs chalks, peels, and weatherstripping tears free at the kerf. We strip, prep, and refinish, or replace the slab when the fiberglass itself is failing.
- Out-of-square stucco reveals on older tract homes. 1940s and 1950s stucco-over-woodframe homes often have reveals and thresholds that aren’t square. Drop-in aftermarket slabs won’t seal. We re-frame and re-flash the opening properly, then hang the door so it actually closes and locks.
- Failed multipoint hardware. Therma-Tru entry systems with multipoint locking are common in San Bruno, and the hardware wears out faster near the bay where salt air and dampness work on the mechanism. We replace locksets, keep OEM gear in common models, and adjust everything so one throwbar locks all three points cleanly.
Therma-Tru Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno sits directly on the San Andreas Fault and atop deep bay-mud and fill soils as you move downhill toward the old Tanforan flats. That’s not trivia. It means a Therma-Tru door job here can quickly become a framing and threshold-anchoring story. Rough openings rack as posts settle, sills drop unevenly, and a door that measured square at install starts dragging at the strike side within a season or two. Contractors offering Therma-Tru repair in Pacifica or in South San Francisco on firmer ground don’t see this pattern the same way. On a 1950s stucco rancher on a raised pier-and-post foundation off El Camino Real in the flats, our crew found the original Fiber-Classic entry dragging hard at the strike side and the bottom rail soft from a fog-damp threshold. The opening itself had racked a little as the posts settled. We re-shimmed and re-anchored the frame, reset the sill with new flashing to shed water off the stucco reveal, and hung a new Smooth-Star slab with OEM sweep and multipoint hardware. That door now closes and locks cleanly through the wet season. If your San Bruno door is sticking, dragging, or letting fog-moisture into the threshold, the door is often only half the problem. We fix the other half too.
Therma-Tru Models & Products We Service in San Bruno
We install and service Therma-Tru Fiber-Classic entry doors, Smooth-Star fiberglass doors, and the Classic-Craft collection, including entry systems with sidelites and multipoint hardware. Our parts approach is straightforward: genuine Therma-Tru OEM sills, sweeps, weatherstrip, and multipoint hardware where the model is still supported, and proven aftermarket seals and closers when a discontinued line makes OEM parts impossible to get. We keep common OEM weatherstripping, sweeps, and sill pans stocked for fast turnaround across San Bruno, because nobody wants a fog-damp threshold sitting open for two weeks while parts ship from a warehouse in Ohio.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in San Bruno
Therma-Tru door work in San Bruno lands in a few common ranges. A full window replacement with exterior door and opening-related work runs $4,500 to $15,000. Impact window installation, often paired with a new Therma-Tru entry on the same elevation, runs $8,000 to $25,000. What drives the cost here is the opening itself: whether the rough frame needs re-shimming, whether the threshold needs reframing, and whether flashing and stucco reveal work are required to shed water properly in a fog-belt climate. Every quote is a written line-item breakdown. No change orders unless you change the scope. Call (855) 473-5620 for a free estimate, and we’ll walk the opening with you before we quote anything.
| Service | Price Range |
|---|---|
| Window Replacement (incl. exterior door/opening-related work) | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
Serving San Bruno, CA — Our Local Coverage Area
We’re a San Bruno General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in San Bruno
Usually the house. On the flats west of El Camino Real, raised pier-and-post foundations settle subtly season after season, and the rough opening racks. The door slab itself may be fine. We diagnose the opening first: check post movement, frame square, threshold level, and hinge wear, then tell you whether you need a re-shim, a re-anchor, or a full slab-and-frame replacement. Call (855) 473-5620 and we’ll look at it.
Yes, wherever the model is still supported. Therma-Tru Fiber-Classic, Smooth-Star, and Classic-Craft systems take OEM sills, sweeps, weatherstrip, and multipoint hardware, and we spec them by default. When a discontinued line makes OEM parts unavailable, we use proven aftermarket equivalents and show you the part before we install it.
Most entry door repairs and slab replacements finish in one visit, assuming the rough opening doesn’t need substantial reframing. If we find racked posts, rotted subsill framing, or stucco reveal damage, we’ll scope the additional work on the spot and give you a written line-item quote before we proceed. We carry common OEM weatherstripping and sweeps in stock, which cuts out the parts wait for most San Bruno jobs.
Fiber-Classic, Smooth-Star, and Classic-Craft entry systems, including configurations with sidelites, transoms, and multipoint hardware. If you have an older Therma-Tru door and aren’t sure of the model, snap a photo of the hinge stamp or the corner of the slab and we’ll identify it for you during the estimate call. Call (855) 473-5620.
An entry door slab and frame replacement, including re-shimming, sill reset, and flashing, typically runs inside the $4,500 to $15,000 range when combined with window replacement or exterior work on the same elevation. A standalone door service call is less. Impact-rated installations paired with windows run $8,000 to $25,000. For an exact number on your specific opening, call (855) 473-5620. Estimates are free and written.
Service Areas Near San Bruno
Our San Bruno crews also cover nearby areas, including San Bruno service area neighborhoods throughout 94066. We regularly run Therma-Tru door jobs down the Peninsula, including Therma-Tru service in South San Francisco and Therma-Tru service in Montara, where coastal fog and seismic ground conditions create similar door-frame challenges.
Book Your Therma-Tru Service in San Bruno Today
If your entry door is dragging, sticking, or letting fog-moisture into the threshold, call us. We’ll walk the opening, tell you straight whether it’s the door or the framing, and quote you a real number. Call (855) 473-5620 to schedule your free estimate.
Written by Ruben Castillo, Owner at San Bernardino Contractors, bringing whole-home construction and Therma-Tru door expertise to San Bruno and the surrounding Peninsula. If it’s not built right the first time, you’re just paying for it twice.