Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Boulder Creek, CA | San Bernardino Contractors
We provide independent Tremron paver and wall installation across Boulder Creek and nearby communities, from driveways and patios to retaining walls on steep canyon lots, plus Tremron service in Ben Lomond. What makes our Tremron work different here is simple: we build for fire season and heavy winter rain, not just for how the pavers look on day one. San Bernardino Contractors is not a Tremron manufacturer affiliate or authorized dealer. We’re a full-service general contractor who specs Tremron products because they perform in mountain conditions. Call (855) 473-5620 for a free estimate on your Boulder Creek project.
Why Boulder Creek Residents Choose Us for Tremron Service
We’ve installed Tremron hardscape products on dozens of steep, fire-impacted lots across the Santa Cruz Mountains, so we know how their pavers and retaining walls perform under WUI rules and heavy winter rain. Our crew tracks Tremron’s full paver and wall lineup, which means we can talk through the real differences between a Mega Olde Towne paver and an Olde Towne paver without reading off a spec sheet. Ruben Castillo, our owner, learned construction from his uncle framing garages and reroofing houses on a shoestring budget in San Bernardino. That hands-on education shaped how we approach every Boulder Creek job: figure out what the ground is actually doing, then build it right the first time. If it’s not built right the first time, you’re just paying for it twice. For broader Tremron expertise and product background, see our Tremron sales & service page.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Boulder Creek
Boulder Creek’s combination of steep slopes, heavy winter rain, and post-CZU sun exposure creates a specific set of failure modes we see again and again. Here’s what we fix most often:
- Efflorescence after winter rains. White mineral deposits bloom on Tremron pavers when water gets trapped under the surface and wicks up through the joints. On Boulder Creek’s hillside lots, inadequate base drainage is usually the culprit. We address the drainage first, then clean and re-sand the joints.
- Paver edge restraint failure on narrow private roads. Many Boulder Creek driveways are tight turnarounds with sharp turning radii. When edge restraints aren’t properly anchored, pavers creep outward and the whole edge starts to sag. We replace failed restraints with concealed options that hold up to repeated turning loads.
- Retaining wall block settling or bulging. Hillside creep and poor compaction on canyon lots push Tremron Weston Wall blocks out of alignment. We rebuild walls with proper base depth, drainage gravel, and geogrid where the slope demands it. Patching a bulging wall without fixing the soil behind it just means doing the job twice.
- Surface spalling and color loss. After the CZU Lightning Complex fire cleared tree canopy across Boulder Creek, many paver surfaces now bake in direct summer sun. We replace spalled or faded units and recommend sealants that protect against UV damage without making the surface slick in winter.
- Washout on steep driveway sections. A 10-12% grade with poor base prep means paver movement after the first real storm. We rebuild with deeper compacted base, proper cross-slope drainage, and edge restraint that handles runoff rather than fighting it.
Tremron Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Boulder Creek’s post-CZU rebuilds on steep canyon parcels often require fire-rated hardscape and defensible-space setbacks that standard Tremron paver installs don’t account for. That’s not a knock on the product. It’s a fact of building in a wildland-urban interface zone where Chapter 7A fire-resistant material rules and defensible-space requirements apply to the hardscape, not just the house. So we spec base depth and edge restraint for both drainage and ember resistance. On a rebuild off Bear Creek Road, we installed a Tremron Mega Olde Towne paver driveway on a 12% slope where the previous asphalt had washed out; we used a deeper compacted base and concealed edge restraints to handle runoff. The homeowner now has a fire-resistant, drivable surface that meets defensible-space clearance from the new cabin. That’s the kind of thinking standard suburban paver crews don’t bring to a Boulder Creek canyon lot. It’s why we treat every Tremron installation here as a site-specific engineering problem, not a template job.
Tremron Models & Products We Service in Boulder Creek
We work with Tremron’s full paver and wall lineup, but these are the models we install and repair most often in Boulder Creek:
- Mega Olde Towne pavers – large-format pavers with a tumbled, old-world finish. Good for driveways and large patios where you want surface strength and visual texture.
- Olde Towne pavers – the classic smaller format. We see these on patios and walkways throughout the Santa Cruz Mountains.
- Weston Wall retaining wall system – our go-to for Boulder Creek hillsides because the block geometry handles vertical loads well when the base is done correctly.
- Glacier slab pavers – a clean, contemporary slab look for modern rebuilds and fire-resistant patios.
We use Tremron OEM pavers and wall blocks for color and dimensional match, and quality aftermarket polymeric sand and edge restraints where they outperform OEM. We repair or replace individual units whenever the base and drainage are sound, and only recommend full replacement when underlying soil movement makes patching futile.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Boulder Creek
Your cost depends on the scope: are we repairing a few spalled pavers or rebuilding a whole driveway base? Here’s what to expect for common Boulder Creek Tremron projects:
| Service | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Steeper lots with poor access, deeper base requirements, or retaining wall scope push costs toward the upper end. A free estimate includes a site walk, slope and drainage assessment, and a written line-item quote, whether you’re in Boulder Creek or need Tremron service in Lompico. Call (855) 473-5620 to schedule one.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well, and we also provide Tremron repair in Brookdale. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Boulder Creek
Yes. Concrete pavers like Tremron Mega Olde Towne and Olde Towne are non-combustible and qualify as fire-resistant hardscape material under Chapter 7A and defensible-space guidelines for the wildland-urban interface. The key is pairing them with non-combustible base and edge details so the entire surface assembly, not just the paver itself, contributes to your defensible space. Call (855) 473-5620 and we’ll walk your specific parcel’s requirements.
We build a deeper compacted aggregate base than what most valley contractors spec, usually 8 to 12 inches depending on slope and soil, and we add concealed edge restraints plus cross-slope drainage so water sheets off the surface instead of undercutting it. On grades above 10%, we often add a geotextile separation layer. Call (855) 473-5620 for a site assessment and an exact base recommendation for your driveway.
Yes, if we know the original product line and enough intact pavers remain to reference. Tremron color lots shift slightly over time, so we pull an existing unit, verify it against current stock, and if needed, blend new units with aged ones across the repair area so the patch doesn’t stand out. For older or discontinued colorways, we’ll show you the closest current match before we order anything. Call (855) 473-5620 with the original product name if you have it.
For a Weston Wall retaining wall on a Boulder Creek slope, we typically bury the first course below grade and build a compacted gravel base of 6 to 12 inches, depending on wall height and soil type. Behind the wall, we install drainage gravel and, on walls over 3 feet, geogrid reinforcement. Walls without proper base and drainage fail fast in this ground. Call (855) 473-5620 to have Ruben assess your slope and give you a straight answer on what will hold.
Foot traffic is fine immediately after we finish compacting and sweeping in the joint sand. For vehicles, wait 24 to 48 hours so the sand settles and the pavers lock together. We’ll give you the exact timeline based on the specific Tremron product and base we installed. Call (855) 473-5620 if you want an install timeline before you commit.
Service Areas Near Boulder Creek
Our Tremron work covers Boulder Creek (95006) and the surrounding mountain communities. For homeowners further out, we also provide Tremron service in Saratoga and Tremron service in Santa Clara. If you’re in the San Lorenzo Valley or nearby, give us a call and we’ll confirm coverage. See our Boulder Creek service area page for details.
Book Your Tremron Service in Boulder Creek Today
Ready to talk pavers, walls, or a full driveway replacement on your Boulder Creek property, or need Felton Tremron service? Call (855) 473-5620 and we’ll schedule a free estimate. Ruben and the crew will come out, read the slope, and give you a straight answer.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Boulder Creek and the Santa Cruz Mountains.