Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Brisbane, CA | San Bernardino Contractors
CGI cabinet installation and refacing in Brisbane usually runs $4,000 to $13,000 for a full kitchen scope, and most of what we do here starts with checking whether the boxes are square before we ever order a door front. We’re San Bernardino Contractors, a Brisbane General Contractor offering independent CGI service, and we do not work under any manufacturer authorization or dealer program. That independence matters in Brisbane because the real question on these fog-belt, slope-bound kitchens is rarely the cabinet brand, it’s whether the carcass survived the moisture and the hillside. Call (855) 473-5620 for a free estimate on CGI cabinet work anywhere in the 94005.
Why Brisbane Residents Choose Us for CGI Service
We know CGI box cabinets the way a roofer in this town knows GAF shingles, by the way they fail. Ruben Castillo, our owner, has spent two decades on whole-home remodels around the Bay Area and the Inland Empire, and he can spot a swollen CGI particleboard sink base from across the room. The tell is the same every time: door skins tight, box edges blown. Brisbane homeowners call us because we’ll say what needs replacing and what doesn’t, before anyone measures for a countertop. We fit OEM-matched hinges when the cabinet system is still sound, and we move to quality aftermarket hardware when the original profile is obsolete. You get one contractor, every phase, from the roof down to the pavers, with no subcontractor shuffle on a kitchen that has to work around fog, slope, and a very particular building department. See our full CGI sales & service page for scope details.
Styles & brands we work with
Common CGI Construction Problems We Solve in Brisbane
- Thermofoil and laminate door skin delamination. Brisbane sits in the fog belt on the bay side of San Bruno Mountain, and south- and west-facing kitchens take wind-driven moisture off the bay for months at a time. CGI thermofoil and laminate fronts peel at the edges on those walls, especially where there’s no vapor control behind the cabinet run. We strip failed skins and re-face with new CGI profiles where the boxes justify it, or swap to slab fronts when the budget says rental-grade is the right call.
- Swollen particleboard and MDF carcasses. The bases fail before the doors do, almost always at the sink base or the bottom rails. Hillside slab moisture wicks upward in Brisbane’s older mid-century stock, and a slow plumbing drip turns a CGI particleboard carcass into a sponge. A swollen box is not worth re-facing. We cut it out, address the moisture source, and set new boxes on a dry, level floor.
- Racked cabinets on settling floors. Brisbane’s buildable land is nearly exhausted, so most CGI kitchens go into existing footprints on slopes above the flats. Floors settle. Lower cabinets rack out of square, drawers bind, and full-overlay doors gap unevenly at the top corner. That’s a re-shim and re-level job before it’s ever a cabinet problem. We check floor level and wall plumb before a single box is set.
- Worn hinges and corroded drawer glides. Original CGI hinges and slides let heavier raised-panel doors sag, and older undermount glides rust in damp base cabinets. We stock common OEM-matched replacements for faster turnaround in Brisbane, and we’ll tell you honestly when aftermarket hardware will outlast the original spec.
- Failed corner gussets and loose face frames. Framed CGI raised-panel runs in Brisbane’s rental and duplex stock get rattled by daily use and the occasional hillside tremor. Corner joints loosen, face frames pull away, and doors no longer seat. We re-square and re-fasten where the wood is still sound, and replace the box when it’s not.
CGI Service in Brisbane: What Local Conditions Mean for Your Equipment
Brisbane’s buildable land is essentially exhausted, so a CGI kitchen here almost always goes into an existing mid-century footprint climbing the slopes above the flats, never a flat-lot subdivision. That changes the first hour on the job. We start by checking floor level and wall plumb before a single box is set, because on a 1950s hillside lot above San Bruno Avenue, the floor has settled at least a quarter-inch over the decades, and a perfect run of frameless CGI boxes shimmed to follow that slope will rack within a season. The city’s own building department keeps tight oversight on hillside and bayfront development, so a kitchen scope often can’t be finalized until grade and drainage on the lot are confirmed. Here’s what that means for a CGI owner in Brisbane: the decision to reface or rebuild usually gets made by the box and floor conditions, not by how tired the door fronts look. One slope-side job above town, we opened a kitchen to find the original CGI particleboard sink base swollen and delaminating from years of bay-fog moisture wicking up the slab. Ruben cut out the failed base and subfloor, corrected the drainage and vapor detailing at the wall, re-leveled and shimmed the floor, then set new frameless CGI boxes with upgraded hardware and a quartz top. The doors close square now, and the base stays dry through the wet season. That is the Brisbane version of cabinet service, and it’s why we tell every homeowner here the same thing: if it’s not built right the first time, you’re just paying for it twice.
CGI Models & Products We Service in Brisbane
We install and rework the full CGI line as it shows up in Brisbane homes: Euro-style frameless full-overlay boxes in thermofoil and melamine, raised-panel maple and oak door fronts on framed boxes, and quarter-inch and three-quarter-inch melamine and particleboard carcasses with MDF doors. The shaker-profile and slab laminate fronts common in Brisbane’s older rental and duplex kitchens are a regular part of our week. On parts, we fit OEM-matched hinges and slides when the cabinet system is still sound, and we switch to quality aftermarket hardware when the original profile is obsolete. We’re honest about repair versus replace: a swell-damaged or delaminated carcass is not worth re-facing, and we’ll say that before anyone sells you a door job on a failing box.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Brisbane
Here’s where CGI work lands in Brisbane, based on the scope we typically see in the 94005:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
The width in those ranges comes down to what we find under the old kitchen: floor level, wall plumb, moisture in the slab, and whether the existing carcasses are worth keeping. A free estimate from us includes checking exactly those things, not just measuring for doors. Call (855) 473-5620 to schedule yours, and we’ll give you a straight answer on repair versus rebuild before any money changes hands.
Serving Brisbane, CA — Our Local Coverage Area
We’re based in the Brisbane area and know this community well, and we also offer CGI service in South San Francisco. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Brisbane
Our CGI cabinets are delaminating on the west wall. Is that a Brisbane moisture problem or just old cabinets?
Both. Brisbane’s fog belt puts persistent, wind-driven moisture on south- and west-facing walls, and thermofoil CGI fronts delaminate at the edges when that moisture has no vapor control behind the run. Old age makes it worse, but the location on the wall is the giveaway. We see it most on hillside homes above the flats where afternoon fog sits against the exterior. Call (855) 473-5620 and we’ll tell you whether the boxes are worth re-facing or need to be cut out.
Can you reface CGI cabinets in a Brisbane hillside home where the floors are out of level?
We can, but only after we re-shim and re-level the base run. New door fronts on a racked box just gap unevenly and give you a different problem. We level the cabinets first, then re-face, and the doors sit square. If the floor itself is still settling, we address that before any cabinet work.
Do kitchen permits in Brisbane go through the city or the county?
Through the city. Brisbane has its own building department with tight oversight on hillside and bayfront work, so kitchen scopes often can’t be finalized until grade and drainage on the lot are confirmed. We handle that paperwork because a permit that stalls on a drainage review is exactly the kind of delay that blows up a kitchen schedule.
Will a new quartz countertop fix a swollen CGI sink base?
No, and we’d never set a new top on a failed base. A swollen particleboard carcass under the sink means moisture has been wicking up the slab or leaking from the plumbing, and the box is done. We cut it out, fix the moisture source, and set new boxes before the countertop goes on. Otherwise you’re paying for a quartz top twice.
How do we know whether to repair or replace our older CGI cabinets?
Look at the carcass, not the doors. If the boxes are square, dry, and the frames are solid, re-facing and upgraded hardware will buy you years. If the bases are swollen, the bottom rails blown, or the face frames pulled loose, replacement is the honest call. We’ll walk you through it on-site, for free. Call (855) 473-5620 to schedule a walkthrough in Brisbane.
Service Areas Near Brisbane
We serve CGI cabinet and kitchen work throughout the northern Peninsula and into the city’s neighbor towns. If you’re in Brisbane service area, South San Francisco, Daly City, or heading south toward Pacifica and the Visitacion Valley side of San Francisco, we’ll send the same crew and the same brand-level material knowledge. See our CGI service in Pacifica and CGI service in Visitacion Valley pages for coverage on those sides of the hill.
Book Your CGI Service in Brisbane Today
If your CGI kitchen is delaminating, racking, or just showing its age on a hillside lot, we’ll come walk the site and tell you exactly what’s worth keeping. Same-week estimates are available for Brisbane addresses and nearby CGI in Daly City. Call (855) 473-5620 to schedule yours.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Brisbane’s fog-belt kitchens with independent CGI service, CGI repair in San Bruno, and whole-home remodeling.