Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Felton, CA | San Bernardino Contractors
We provide independent CWS service across Felton, CA (95018) from roof repairs and standing seam metal roofing to gutters, fascia, and the exterior work that keeps a CWS-clad home watertight under redwood canopy. Most CWS failures we see in Felton aren’t failed panels. They’re failed fasteners, clogged valleys, and rotted terminations where shade and storm debris did the damage. We’re San Bernardino Contractors, led by Ruben Castillo, and we know CWS assemblies from the panel down to the underlayment. Call (855) 473-5620 for a free estimate on any CWS repair or exterior project in Felton.
Why Felton Residents Choose Us for CWS Service
We’ve rebuilt and re-roofed enough CWS-clad homes in the San Lorenzo Valley to know how their assemblies actually fail under redwood shade and atmospheric-river rain, and how to detail them to survive it. That’s the difference between a contractor who’s worked on CWS roofs in Felton and one who’s read a product sheet. Ruben Castillo grew up watching his uncle reroof houses and frame garages, then spent his construction technology training at San Bernardino Valley College learning load paths, drainage, and structural detailing. That background shows up on every CWS roof we touch here.
We’re an independent contractor. We’re not authorized by or affiliated with CWS, and we’ll tell you plainly when a CWS component is worth keeping and when it isn’t. That independence means we spec CWS-spec fasteners, closures, and touch-up for anything on the panel itself, and quality aftermarket underlayment, edge metal, and gutter systems where they outperform stock. No reason to pay metal-roof prices for a drip edge. If you’d like to understand how we approach CWS CWS sales & service, we’ve written about our parts and repair philosophy there.
Styles & brands we work with
Common CWS Construction Problems We Solve in Felton
Metal roofs fail in predictable ways when they’re installed under trees and on steep, shaded lots. Here’s what we find most often on CWS roofs across Felton:
- Fastener and gasket failure on metal panels. Redwood litter packs roof valleys and holds moisture, so screws and EPDM washers dry out and back out. The panels are fine. The fastening is what leaks. In Felton, this is the single most common CWS repair we make on shaded valley planes.
- Side-lap and panel-end corrosion under year-round shade. Lower roof planes that never see sun stay damp after winter storms. Cut edges and panel ends rust while the finish chalks. This corrosion pattern is worse in Felton than in drier inland towns because the marine-influenced air keeps metal wet longer.
- Debris-dammed water behind panels and in gutters. Needle load off the canopy chokes gutters and dumps runoff against fascia and posts, driving rot at trim and panel terminations. On steep lots, that water runs where you don’t want it: into the wall, into post-and-pier foundations, into the hillside.
- Wind-lifted and oil-canned panel sections. When CWS metal was laid over marginal old sheathing on a steep wooded lot, the metal telegraphs every soft spot underneath. We see this on older Felton cabins and 1960s-80s ranch homes where the original decking was never replaced.
- Gutter and fascia rot at panel terminations. Felton’s winter storms push heavy rain and redwood debris through gutters that were never sized for the canopy load. Fascia behind the gutter rots, the panel end lifts, and the leak starts.
Every one of these is repairable without a full re-roof when caught early. That’s why we tell Felton homeowners to take valley staining and a damp ceiling on the downhill plane seriously.
CWS Service in Felton: What Local Conditions Mean for Your Equipment
Felton’s roof planes are split by deep redwood shade. The sunlit ridge gets hot and dries quickly after a storm. The downhill valley plane sits under second-growth canopy and stays wet year-round. So the same CWS panel run can show chalked finish and rusted cut edges on one side and look brand new on the other. That’s not a manufacturing defect. That’s Felton. Contractors who work flatland tracts don’t read a roof this way, and they end up replacing panels that could have been re-fastened and re-flashed for a fraction of the cost. We got a call on a redwood-era cottage off lower Graham Hill where the homeowner saw water stains on the ceiling just uphill of a low CWS metal roof plane under second-growth redwood canopy. What we found wasn’t a failed panel. The screw gaskets had dried and backed out along the shaded valley, and redwood needles had choked the gutter, sending runoff behind the panel end into the fascia and a post-and-pier foundation below. We replaced the fasteners and closures, re-flashed the termination, cleared and re-hung the gutter, and replaced the rotted fascia. No panel replacement. No leak the next storm. If it’s not built right the first time, you’re just paying for it twice.
CWS Models & Products We Service in Felton
We service the CWS product lines most common on Felton homes: standing seam metal roofing with Kynar 500 finish panels, metal shingle and stamped-steel roofing profiles, and the painted steel shake and tile-look profiles you see on older mountain cottages and redwood-era bungalows. For anything on the panel itself, we use CWS-spec fasteners, closures, and touch-up so the repair matches the original assembly. For underlayment, edge metal, and gutters, we spec quality aftermarket materials where they’ll hold up better in a wet, debris-heavy valley climate. We keep common CWS fasteners, closures, and touch-up on hand for fast Felton turnarounds, and we can source the rest quickly. Metal panels last decades. A leaking CWS roof in Felton is almost always a fastener, flashing, or substrate problem, and we repair honestly rather than sell a whole re-roof when the panels are sound.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Felton
What you’ll pay depends on the scope: a fastener and gasket repair on one valley is very different from tearing off and re-roofing an entire 2,000 sq ft roof plane. Our estimates are written and line-item, so you see exactly where the money goes before any work starts. Here are the ranges we work within for Felton CWS and roofing work:
| Service | Typical Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Metal Roof Installation | $15000 – $40000 |
| Tile Roof Repair | $600 – $2500 |
Those ranges reflect Felton-specific realities: steep access, limited staging on sloped lots, and the extra time it takes to work around tree protection and erosion-control rules. Call (855) 473-5620 for an exact quote. Estimates are free, and we’ll tell you straight whether a repair makes sense or the panels have hit the end of their service life.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Felton
No. We’re an independent contractor and not authorized by or affiliated with CWS. What that means for you is we spec parts honestly: CWS-spec fasteners and closures on the panels, quality aftermarket underlayment and edge metal where they perform better for the price. If you want service through CWS directly, CWS sales & service information is on our site. But if you want a straight repair diagnosis on a CWS roof in Felton, call us at (855) 473-5620.
Yes. Felton’s winter atmospheric-river storms push redwood needles, branches, and runoff through valleys and gutters in a way flatland roofs never see. We handle storm-related fastener blowouts, debris-dammed gutter overflows, fascia rot, and panel damage from falling limbs. Call (855) 473-5620 after the storm passes and we’ll get your CWS roof assessed, tarped if needed, and on the repair schedule.
Most fastener, flashing, gutter, and fascia repairs on CWS roofs take one to two days once we’re on site, depending on the number of valley planes and whether we need to re-hang gutters or replace rotted trim. A full re-roof over existing sheathing typically runs one to two weeks, and metal roof installation on a full Felton home is a two-to-four-week job depending on pitch, access, and weather. Call (855) 473-5620 for a schedule estimate on your specific roof.
Standing seam panels with Kynar 500 finish, metal shingle and stamped-steel profiles, and painted steel shake and tile-look profiles are the most common CWS products on Felton homes, and we service all of them. If you know the profile or have the original roofing paperwork, bring it to the estimate. If you don’t, we’ll identify the panel and the failure mode on site.
Roof repair in Felton runs $400 to $1,800 depending on how many valleys, fasteners, and terminations are involved. A single leaking valley with dried gaskets is on the lower end. Multiple planes, rotted fascia, and re-hung gutters push toward the top of that range and sometimes into the replacement range if the sheathing under the metal has failed. Call (855) 473-5620 for a written, line-item quote. Estimates are free.
Service Areas Near Felton
We serve Felton and the surrounding San Lorenzo Valley communities. If you’re nearby in Ben Lomond, Mount Hermon, Scotts Valley, Boulder Creek, or Lompico, call us. For our detailed coverage information, see the Felton service area page, or if you’re further south, CWS service in Seven Trees and CWS service in Lexington Hills cover those ZIPs.
Book Your CWS Service in Felton Today
If you’ve got water stains on a ceiling, a gutter pulling away, or a CWS roof valley that’s holding water and redwood debris, call (855) 473-5620. We’ll schedule a free estimate, diagnose the actual failure, and give you a written quote. Felton roofs fail in patterns we know well, and we’ll tell you exactly what yours needs.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Felton and the San Lorenzo Valley.