Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Santa Ana, CA | San Bernardino Contractors
We install, repair, and replace Jerith ornamental aluminum fencing and railing across Santa Ana, and the work here is different than it is in newer Orange County cities. Tight lots, old garages, and wind loading mean your Jerith fence needs footings, bracing, and gate hardware picked for this specific ground, not a generic spec sheet. We’re an independent contractor, not a Jerith dealer or authorized rep, and we’ve been running Jerith panels on Santa Ana properties long enough to know where they fail and what makes them last. Call (855) 473-5620 for a free estimate on Jerith fencing, railing, or gate work in Santa Ana.
Why Santa Ana Residents Choose Us for Jerith Service
Most fence crews in Santa Ana and those offering Jerith repair in North Tustin can dig a post hole. Fewer can tell you why a Jerith Industrial Series panel will chalk on a south-facing run faster than the same panel in Irvine, or why a gate post set in old garage-slab edge concrete will lean after two seasons of wind. We can, because we’ve pulled enough Jerith posts out of Santa Ana yards to know what’s underneath them.
Our owner, Ruben Castillo, grew up watching his uncle frame and reroof houses in San Bernardino’s Westside, and that education taught him one thing early: if the footing’s wrong, nothing above it matters. He carried that into construction technology training at San Bernardino Valley College and now into every Jerith fence we build around Santa Ana’s 1920s bungalows and mid-century tracts, as well as Jerith in Orange. We spec genuine Jerith posts, panels, caps, and hinges whenever a matching series is still available, and we stock the common aftermarket hardware for fast turnaround without waiting on a distributor. You’re getting a crew that knows the fence and the city.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Santa Ana
- Chalking and fading powder-coat on west and south exposures. Santa Ana’s sun is relentless. Jerith’s factory powder-coat is good, but on a west-facing run along a 92701 bungalow, it’ll chalk and fade years before a fence in Huntington Beach. We strip, prime, and refinish where it’s still sound, and tell you straight when replacement runs are the better call.
- Post lean and panel racking from shallow footings. A lot of older Santa Ana fences were set in 18 inches of concrete on expansive soil. Then the winds come and the whole run starts to lean. We dig deeper, set posts on engineered piers where the soil calls for it, and rack panels to follow actual grade instead of fighting it.
- Gate sag and hinge loosening on tight driveways. Small lots mean gates get cycled constantly. Jerith aluminum gates are light, but the hardware still wears and hinges loosen. We rebuild latch and hinge points with quality self-closing hardware that holds adjustment.
- Pool-barrier spacing and latch failures at inspection. We’ve been called in after a Santa Ana city inspector tagged a Jerith pool barrier for picket spacing that was never compliant or a latch that wouldn’t self-close. We correct the spacing where it’s possible and replace latch sets with pool-code hardware.
- Fence-to-garage transitions on ADU conversions. The detached garage is Santa Ana’s hottest ADU target, and the fence line that dies into the old garage wall often has to move or be rebuilt where the new ADU pad changes the setback. We coordinate that with the site plan so the fence isn’t the thing that holds up final inspection.
Jerith Service in Santa Ana: What Local Conditions Mean for Your Equipment
Here’s what most fence companies don’t say about Santa Ana or Jerith in Fountain Valley. The city’s push to streamline ADU permits and its Downtown revitalization review mean a Jerith fence line is rarely just a fence line anymore. When a homeowner pulls a permit to convert a detached garage or add a rear unit, the city wants that fence shown on the same site plan as the ADU’s setbacks. The fence becomes part of the permit review, not an afterthought. Pair that with the soil under the 1940s and 50s bungalows south of French Street and across 92703: shallow, unengineered footings over expansive dirt that swells and shrinks with every wet winter and dry Santa Ana wind season. A fence post set in that ground the cheap way will start leaning within a couple of years. A Jerith run built right for Santa Ana means deeper piers, drainage gravel, and panels racked to the actual slope. We’ve done exactly this on a bungalow off French Street where the owners were converting their detached garage to an ADU. The original garage footings were shallow, so we set the new Jerith Residential Series posts on engineered piers and the fence passed inspection alongside the ADU plans. That’s the difference between a fence that stands and one you’re realigning every spring.
Jerith Models & Products We Service in Santa Ana
We work on the full Jerith aluminum lineup: Industrial Series, Residential Series, and the Regis Series ornamental fence, plus their aluminum gate and railing systems, including ornamental picket, pool-code, and decorative styles. The right approach depends on the series and the age. Where a matching Jerith series is still in production, we order genuine Jerith posts, panels, caps, and hinges so the repair disappears into the original run. Where the series has been discontinued or the factory powder-coat is failing across whole sections, we tell you that too: aftermarket panels would never match, and you’ll spend less over ten years replacing the run than patching it yearly. For hardware like self-closing hinges and latches, we use quality aftermarket parts and stock the common ones locally so your Santa Ana gate is locked and closing the same week.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Santa Ana
What you’ll pay for Jerith work in Santa Ana depends on run length, gate count, footing depth, and whether you’re adding to an existing fence or starting fresh. Longer runs with pool-code hardware and engineered footings run higher. Here are the ranges we quote most often:
| Service | Santa Ana Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Garage Conversion | $30,000 – $80,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
Every quote includes a site visit, a line-item breakdown, and a straight answer on whether repair or replacement makes more sense. No change orders on work we spec correctly the first time. Call (855) 473-5620 and we’ll walk the fence line with you.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well, including nearby Jerith service in Tustin. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Santa Ana
Yes, and in Santa Ana it often has to be. When you pull permits for a garage conversion or rear addition, the city wants the fence line shown on the same site plan as the ADU setbacks. That means the fence gets reviewed with the project, not treated as separate work. We coordinate the Jerith layout with your plans so you don’t get tagged at final inspection for a fence that’s two feet into the wrong setback. Call (855) 473-5620 and we’ll check your site plan before any panels are ordered.
Only if it’s set and finished for Santa Ana, not for a generic spec. The wind loads here will rack a lightly footed aluminum run within two seasons, and the UV will chalk a west-facing powder-coat faster than it would near the coast. We set posts on deeper engineered piers where the soil calls for it and use hardware that holds under repeated gust loading. A Jerith fence built right for this city will outlast wood by decades.
You don’t, until it’s surveyed or you’ve pulled the parcel map and located your corner markers. On Santa Ana’s small lots, the fence line and the legal line are often off by a few inches to a foot, usually where an old wood fence was replaced without a survey. We’ll work from your survey or help you get one before we set posts, because ripping out a mislocated Jerith run is an expensive fix. Call (855) 473-5620 and we’ll check what you have on file.
Yes. We install Jerith ornamental aluminum picket with pool-code spacing and self-closing, self-latching gate hardware that meets Santa Ana inspection requirements. If an existing Jerith pool barrier failed inspection for spacing or latch issues, we’ll tell you whether it can be corrected or the section needs to be rebuilt.
For most small lots here, yes. Wood ages fast in Santa Ana’s sun and wind, and a narrow side yard means every square foot of clearance matters. Jerith aluminum panels are thinner, straighter, and don’t rot at the post line. The upfront cost is higher, but you’re not replacing pickets every five years. For an exact quote on your run, call (855) 473-5620 and we’ll price it both ways.
Service Areas Near Santa Ana
Our Jerith work around Santa Ana reaches into Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy. If you’re in one of those areas and need Jerith sales & service with the same soil-specific approach, we’ll come out. We also serve the broader Santa Ana service area, plus Jerith service in Coto De Caza for larger lots and Jerith service in Wildomar where the soils shift differently. Wherever the fence goes, we build it for the ground it’s on, not the ground a catalog assumes.
Book Your Jerith Service in Santa Ana Today
Call (855) 473-5620 and we’ll walk your fence line, check your site plan if an ADU is involved, and give you a written estimate. If it’s not built right the first time, you’re just paying for it twice, and in Santa Ana that’s truer than most places.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Santa Ana with Jerith fencing, railing, and gate service.