Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | San Bernardino Contractors
We provide independent Jerith aluminum fence and railing service across Mountain View, from the 94040 west side to the downtown bungalow blocks in 94041, and also offer Jerith in Sunnyvale. What makes our Jerith work different here is that we actually know the ground we’re digging in: clay-heavy North County soil that heaves, Eichler-era slab edges with no clean footing line, and tight side yards that punish a level run. If you need a Jerith fence installed, repaired, or reset in Mountain View, call (855) 473-5620 for a free estimate.
We’re an independent contractor, not affiliated with or authorized by Jerith. The expertise is ours: the layouts, the footings, and the code work. And we’ve been doing it long enough to know which panels bind and which posts lean before the first winter rain hits.
Why Mountain View Residents Choose Us for Jerith Service
Most fence companies can hang an aluminum panel. What they can’t always do is tell you why your Jerith run went out of plumb two winters after it was installed, or whether a sagging pool-code gate latch is worth repairing versus replacing. We can. We’ve installed and repaired Jerith ornamental aluminum fencing across the Peninsula and South Bay for years, and we know the product line from the Riviera and Sierra series to the Monticello rackable panels, and how it behaves in real yards here.
Ruben Castillo, our owner, got his start watching his uncle frame and reroof on a shoestring budget, then went through construction technology training at San Bernardino Valley College where he learned to read plans and respect load paths. That background shows up in how we set posts and step panels on Mountain View lots where the grade fights you. We run Jerith sales & service the way a contractor should: honest about what’s repairable, specific about what’s not, and never vague when a real answer will do.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Posts heaved by clay soil after the winter wet season. Mountain View’s clay-heavy North County soil expands when it rains and shrinks when it dries. Posts set shallow in that clay start leaning by February, and the panel line racks out of plumb with them. We reset footings deeper with drainage gravel, which matters more here than in cities with better-draining ground.
- Powder-coat chalking and edge chipping at field cuts. We see this a lot on older Jerith runs around Mountain View where panels were cut on site without touch-up. The coastal-adjacent humidity, mild as it is, still finds those bare aluminum edges and starts the chalking process. We touch up and seal cuts so the finish holds.
- Gate sag and worn hinges on self-closing pool-code gates. Mountain View has a high concentration of older pools on the west side and in 94041 bungalow yards. A pool-code gate that no longer self-latches is a code violation, not just an annoyance. We replace hinges, latches, and springs so the gate swings true and latches itself again.
- Racked Monticello panels that bind on sloping side yards. The Eichler-era lots in 94040 rarely have flat side yards. When a run was installed level over a slope instead of stepped with the grade, the rackable panels bind and the pickets start to twist. We re-step the run properly.
- Panel lines out of plumb because property lines weren’t confirmed before digging. On Mountain View’s west side, where lots are tight and the original 1960s plats are sometimes unclear, we’ve seen fence runs encroach by inches. We confirm the recorded plat before we set a single post.
Jerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s the thing about Mountain View’s west-side Eichler homes in 94040 that most fence installers don’t plan for: many of these lots have no traditional side-yard footing line because the original radiant-slab and low-pitch roof detailing left shallow grade and tight lot lines. A Jerith run there usually means stepping panels to follow the slab edge and confirming the property line against the recorded plat before we dig. That’s different from a flat inland tract where a level run is the default. The Eichler flat-roof, no-attic design also means there’s nowhere to hide mistakes. If a panel rack bind, it shows. If a post leans, it’s visible from the street. The homeowner on Martens Avenue knows exactly what we mean. On a 1960s ranch lot off Martens in the 94040 west side, our crew was called out for a leaning Riviera aluminum fence line the homeowner had inherited. Three posts had heaved after the winter rains and the panels were racked against the slope. We pulled the old footings, reset them deeper in the clay with drainage gravel, and stepped the Monticello panels to the grade instead of forcing a level run, then replaced a sagging pool-code gate latch so it self-closed again. The line came back plumb and the owner has a fence that sheds water instead of holding it. In Mountain View, that’s not a special request. That’s just how the ground behaves.
Jerith Models & Products We Service in Mountain View
We service the full Jerith residential aluminum line: the Riviera series, the Sierra series, the Monticello rackable panels, and the aluminum pool-code fencing with self-closing gates. For parts, we use genuine Jerith replacement panels, posts, and hardware where the existing run is a current series, so the finish and profile match. Where an OEM part is discontinued, we use quality aftermarket hinges, latches, and touch-up. If posts are sound and only the gate hardware or a few panels have failed, we repair. If the footings are heaving or the line is out of plumb, we reset rather than patch. We stock the common hardware locally for fast Mountain View turnaround, so a sagging pool gate in 94041 doesn’t wait a week for parts.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
Jerith fence and metal roof work in Mountain View is priced by the linear foot for fencing and by the square for roofing, but the ranges below give you a realistic starting point for Home Remodeling – Mountain View. What drives the cost here is the ground: if we’re resetting heaved posts in clay, that’s labor and drainage gravel on top of the panel work. If we’re stepping a run to follow an Eichler slab edge, the layout time goes up. Every estimate is free, and we write line items so you can see exactly what you’re paying for. Call (855) 473-5620 to schedule yours.
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Mountain View generally requires a permit for fences over six feet, and the city reviews placement against the recorded plat. On Eichler-era side yards in 94040, the shallow slab grade and tight lot lines mean the permit review often focuses on the property line and the step pattern. We handle the permit paperwork, and we confirm the plat before we dig, because fixing an encroaching fence after the fact costs more than the permit ever did. Call (855) 473-5620 for an exact quote, estimates are free.
Mountain View’s North County clay expands when it takes on water and contracts when it dries, which pushes shallow-set posts out of vertical over repeated wet-dry cycles. The fix is setting posts deeper, into stable soil, and packing the hole with drainage gravel so water doesn’t pool against the post base. A lean isn’t something you shim out; the footing has to be reset. If your Jerith line is leaning after the winter rains, call (855) 473-5620 and we’ll tell you whether it’s a reset or a full replacement.
Yes. If the posts are sound and only a few panels or the gate hardware have failed, we repair. We source genuine Jerith panels for current series so the finish and profile match, and we use aftermarket hardware only where OEM parts are discontinued. When the footings are heaving or the line is out of plumb, we reset rather than patch, because patching a line that’s already moving just means paying for the same repair twice. Call (855) 473-5620 for a free assessment.
We do. We’re a full-service General Contractor – Mountain View, so when a homeowner needs a Jerith fence reset and a flat-roof repair on the same Eichler property, we handle both under one contract and one schedule. That means no coordinating a fence crew and a roofing crew separately. We run roofing systems from GAF, CertainTeed, Owens Corning, IKO, Atlas, and Tamko, so the flat-roof work is done with materials we’re authorized to install. Call (855) 473-5620 to talk through a combined scope.
We stock common hardware and touch-up materials for the Riviera, Sierra, and Monticello rackable series, plus the aluminum pool-code fencing with self-closing gates. To match an existing fence, we identify the series and the finish from the panel profile and the post cap design, then order genuine Jerith panels so the new section doesn’t stand out. If the original series is discontinued, we’ll tell you before we order anything. Call (855) 473-5620 and we’ll match your fence from a photo and a site visit.
Service Areas Near Mountain View
We provide Jerith service across Mountain View service area and the surrounding South Bay and Peninsula communities. We also run Jerith work in Jerith service in Los Altos and Jerith service in Los Altos Hills, where the lot sizes and grade patterns are similar but the permitting and setback rules differ. If you’re just outside the city line, ask. We likely cover it.
Book Your Jerith Service in Mountain View Today
If your Jerith fence is leaning, binding, or the pool gate won’t self-latch, don’t wait for the next winter rain before calling for Jerith repair in Loyola or Mountain View. Call (855) 473-5620 to schedule your free estimate. We’ll walk the line, tell you what’s repairable and what isn’t, and give you a written line-item quote before any work starts.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Mountain View and the South Bay.