Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Bernardino Homeowners Choose Mr-Glass Construction
Mr-Glass construction service in San Bernardino comes down to one thing: knowing how these windows and doors actually fail in this specific climate, not just how they look in a catalog. We’re also the team locals trust for Mr-Glass in Fontana. We’re San Bernardino Contractors, an independent Mr-Glass service provider serving 92401, 92402, 92403, and 92404. We are not affiliated with or authorized by Mr-Glass, but our crews have specialized in Mr-Glass products for over a decade. That means when a 3000 Series dual-pane fogs up from a blown seal after three San Bernardino summers, we know exactly what to do. Call (855) 473-5620 for a free estimate.
Why Trust San Bernardino Contractors for Your Mr-Glass Construction?
Ruben Castillo, our owner, grew up in the Westside neighborhood of San Bernardino watching his uncle reroof houses and frame garages. That early education taught him something most contractors learn too late: a window that isn’t installed square will haunt you for years, and a seal that fails in the Inland Empire heat fails fast. Ruben later completed his construction technology training at San Bernardino Valley College, where he got serious about load paths, thermal movement, and why corners can’t be cut on anything structural. That’s the lens we bring to every Mr-Glass window, sliding door, and shower enclosure we touch.
Our techs can tell you the difference between a Mr-Glass 3000 Series vinyl window and a 6000 Series aluminum frame by feel, not by reading a spec sheet. We know which seals tend to go first, which roller assemblies wear out, and what San Bernardino’s UV exposure does to vinyl frames over time. When you call us, you’re not getting a general handyman who’s vaguely familiar with “that one brand.” You’re getting a crew that has pulled apart enough Mr-Glass units to know exactly what’s behind the glazing bead and how to fix it without damaging the frame.
If it’s not built right the first time, you’re just paying for it twice. That’s how we approach every Mr-Glass repair and install in San Bernardino.
Styles & brands we work with







Common Mr-Glass Construction Problems We Fix in San Bernardino
- Fogging and condensation between panes in dual-pane Mr-Glass windows. This is the most common call we get from San Bernardino homeowners with 3000 Series windows. The desiccant inside the spacer bar saturates, the edge seal gives out, and moisture gets trapped between the glass. In San Bernardino’s hot, dry summers followed by cool winter nights, this thermal cycling accelerates seal failure. The fix is an insulated glass unit replacement, not a whole new window.
- Sliding glass doors that drag or won’t move. Mr-Glass sliding doors use roller assemblies that wear out over time, especially when dust and grit from San Bernardino’s Santa Ana winds get into the track. The rollers flatten, the bearings seize, and the door starts scraping. We replace the roller cartridges, clean and lubricate the track, and re-align the door so it glides again. Waiting too long turns a $200 roller job into a damaged track repair.
- Vinyl frame warping from prolonged sun exposure. The 3000 Series vinyl frames are solid windows, but San Bernardino’s UV index is brutal. South- and west-facing exposures can cause slight bowing or stiffness at the corners after 10 to 15 years. It’s not a manufacturing defect; it’s the desert. We can often restore operation with minor adjustments, and if the frame is too far gone, we’ll tell you honestly rather than sell you a repair that won’t hold.
- Leaks at joints and seams in 6000 Series aluminum windows. Aluminum expands and contracts with temperature swings. Over years of San Bernardino heat, the corner keys and seam seals in the 6000 Series can work loose, letting water in during winter rains. We disassemble, inspect the weep system, re-seal the joints with proper sealant, and re-install the sash with fresh weatherstripping.
- Shower enclosure glass that’s etched, chipped, or leaking at the door. San Bernardino’s hard water leaves mineral deposits that etch glass over time. On Mr-Glass custom shower enclosures, we also see hinge hardware loosening from repeated daily use. We replace worn hinges, re-align the door, and if the glass is too etched to restore, we’ll price a replacement panel.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source OEM Mr-Glass parts when it matters: roller assemblies, locking hardware, balance systems, and glazing. These are the components where a generic part changes the feel or the fit. For non-critical items like weatherstripping, shims, and interior trim accessories, we use high-quality aftermarket parts that match or exceed the original spec. This keeps your repair cost reasonable without compromising the function.
We stock common Mr-Glass replacement parts locally in San Bernardino and for Mr-Glass in Rialto, so most window and door repairs don’t wait on a parts delivery. When we assess a Mr-Glass window or door, we ask one question: will this repair hold up for at least five more years under San Bernardino conditions? If the answer is no, we recommend replacement and show you the math. If a $350 seal replacement buys you five more years on a window that would cost $900 to replace, we’ll tell you to repair it. We make our money either way, and we’d rather earn your next call with an honest answer.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place: glass seal integrity, frame alignment, roller condition, weatherstripping, and any water staining. For fogged dual-pane units, we confirm the seal failure and measure the exact glazing thickness and frame profile.
- 2
Repair or install. We match the replacement insulated glass unit to the Mr-Glass frame profile, or install the new window, door, or shower enclosure with proper shimming, flashing, and sealant. No shortcuts on the rough opening, ever.
- 3
Testing. We open and close every sash and door, check the locking points, run water over exterior seals, and verify the glass is seated without stress points. If it doesn’t operate smoothly now, it won’t get better after a year of San Bernardino heat.
- 4
Workmanship warranty. We stand behind our labor on every Mr-Glass repair and install. If something’s off, you call us and we come back. That’s the whole point of single-source accountability.
Mr-Glass Products We Service & Install in San Bernardino
Our crews work on the full Mr-Glass residential line: the 3000 Series vinyl windows (single- and double-hung, sliders, casements), the 6000 Series aluminum windows, Mr-Glass sliding glass doors in standard and multi-panel configurations, and custom mirror and shower enclosures. We also install impact-rated windows for San Bernardino homeowners in foothill areas east of Waterman Avenue, where wind-driven debris during Santa Ana events can test older glazing. We stock common roller assemblies, seals, and glazing units locally for fast turnaround.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
While this page focuses on Mr-Glass, San Bernardino Contractors is a multi-brand contractor with access to over 50 product lines. We install KraftMaid cabinetry, fabricate Cambria and Silestone countertops, and specify Kohler plumbing fixtures across kitchens and baths. One contractor, every trade, no subcontractor shuffle.
FAQs – Mr-Glass Construction Service in San Bernardino
Yes. In most cases, we replace just the insulated glass unit inside the existing Mr-Glass frame. We recently did exactly this for a homeowner in San Bernardino with a 3000 Series vinyl window: the seal had failed, condensation clouded the glass, and the frame was still in good shape. We handle similar Mr-Glass repair in Bloomington too. Our tech matched the glazing and frame profile, installed a new insulated glass unit, and restored clear visibility and energy efficiency without replacing the entire window. The job took under two hours and cost a fraction of a full replacement. Call (855) 473-5620 and we’ll tell you if your fogged window qualifies for a glass-only repair.
Yes. We install impact-rated windows for homes across San Bernardino, including foothill neighborhoods where wildfire and Santa Ana wind exposure make impact glazing a practical upgrade. Impact window installation in San Bernardino typically ranges from $8,000 to $25,000 depending on the number of openings, frame material, and whether you’re upgrading from single-pane or old dual-pane units. Call (855) 473-5620 for a free estimate based on your specific window count.
Worn rollers and track corrosion. The roller cartridges flatten over time, the ball bearings seize up, and dust from San Bernardino’s dry conditions works into the track. Once the rollers stop rolling, the door starts dragging, and the bottom rail grinds against the track. We replace the roller assembly, clean and lubricate the track, and re-align the door. It’s a same-visit repair in most cases. Call (855) 473-5620 if your Mr-Glass slider is starting to stick.
Most single Mr-Glass window replacements take one to two hours once the new unit is on site. A full-home window replacement for a standard San Bernardino 3-bedroom home usually runs three to five working days, depending on the number of openings and whether we’re addressing any dry rot or framing issues uncovered during tear-out. We give you a written timeline before we start. Call (855) 473-5620 to schedule your free estimate.
Yes. We design and install frameless glass shower enclosures using Mr-Glass custom glass and hardware. Shower replacement and enclosure installation in San Bernardino typically runs $3,000 to $8,500, depending on glass thickness, panel size, and hardware finish. We also install Mr-Glass in Glen Avon. We’ll measure, cut, and install to fit your exact opening. Call (855) 473-5620 for a quote on your shower enclosure.
No. We are an independent Mr-Glass service provider. We’re not affiliated with or authorized by Mr-Glass, and we don’t claim to be. What we offer is over a decade of hands-on experience with Mr-Glass products, OEM parts sourcing where it matters, and honest repair-vs-replace advice that keeps your windows and doors working in San Bernardino’s climate. Your call, your choice.
What Mr-Glass Service Costs in San Bernardino
| Service | Typical Range in San Bernardino |
|---|---|
| Window Replacement (Mr-Glass install) | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Shower Replacement / Frameless Enclosure | $3,000 – $8,500 |
These are project-level ranges for San Bernardino homes. A single glass-unit repair on a Mr-Glass 3000 Series window costs significantly less than a full window replacement, and we’ll tell you if your situation qualifies. Call (855) 473-5620 for an exact quote based on your specific windows, doors, or shower opening. Estimates are free.
Book Your Mr-Glass Service in San Bernardino, CA
From fogged dual-pane units to sliding doors that won’t slide, we know Mr-Glass products inside and out. One contractor, every phase. Call (855) 473-5620 to schedule your free estimate in San Bernardino, CA.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving San Bernardino since day one.