Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Costa Mesa, CA | San Bernardino Contractors
We’re an independent CWS service provider handling cabinet installation, refacing, countertop work, and full kitchen remodels across Costa Mesa’s 92626, 92627, and 92628 ZIP codes. What makes our CWS work different here comes down to one thing: Costa Mesa’s older coastal housing stock means almost every CWS kitchen we touch involves out-of-square walls, humidity-aged cabinets, or an unpermitted addition hiding behind the stucco. When you call San Bernardino Contractors at (855) 473-5620, you get a crew that’s already worked through those exact problems on blocks all over this city.
Why Costa Mesa Residents Choose Us for CWS Service
We’ve spent years installing, refacing, and repairing CWS cabinetry and countertop packages specifically in Costa Mesa’s tight infill lots. Perfectly square walls and level floors almost never exist here, and that’s where our CWS sales & service experience earns its keep. Ruben Castillo runs our crews with a simple rule: if it’s not built right the first time, you’re just paying for it twice. That means we shim, plane, and level before we ever set a cabinet box, because we know a CWS shaker line installed on a 1950s slab will sag within two years if the floor was never addressed. An independent CWS service provider, not affiliated with or authorized by the manufacturer, we’re free to tell you straight when a box is worth saving and when refacing is money wasted on swollen board. Our Costa Mesa service area coverage means we’re local enough to know your block, your tract, and what your house is probably hiding.
Styles & brands we work with







Common CWS Construction Problems We Solve in Costa Mesa
- RTA cabinet joints loosening and door sag on 92627 bungalows. Coastal humidity cycling plus homes without real HVAC balance means CWS ready-to-assemble joints work themselves loose over time. We tighten, reinforce, and swap hinges before refinishing.
- Particleboard boxes swelling at the toe kick and sink base. Slow leaks and marine-layer damp on the east side saturate CWS board from the bottom up, often before you see any visible water. By the time homeowners notice, the box has to go. We replace and address the moisture source.
- Painted CWS doors checking and peeling near east-side windows. Salt air and morning moisture beat on painted finishes in Costa Mesa, especially on the 92627 side. We strip, prime, and refinish with products that hold up to that specific exposure.
- Countertop seams and laminate edges lifting on infill-lot kitchens. When a small Costa Mesa kitchen was installed out of square and the cabinets shift, seams separate and laminate edges roll up. We reset, reseam, and get everything locked down.
- Unpermitted additions stalling cabinet work on the Westside. Opening a wall for a CWS kitchen install regularly turns up an enclosed porch or converted garage that was never permitted. The cabinet job pauses while we run plan-check and legalization, then we build to the real footprint. We plan CWS layouts and order around what’s actually there, not the listed square footage on the listing.
CWS Service in Costa Mesa: What Local Conditions Mean for Your Equipment
On the Westside of Costa Mesa, those 1940s and 50s bungalows between Baker and Placentia hold a secret that reshapes nearly every CWS kitchen we touch. Behind the stucco you’ll regularly find enclosed porches and converted garages that were permitted as sheds or never permitted at all. When we open a wall to install a CWS RTA shaker line, the job turns into a plan-check and permit legalization process before finish work can start. That’s why we measure the real footprint, not the square footage from the listing, and order CWS boxes to fit what’s actually framed. In the 92626 tract homes from the 60s and 70s, the problems are different: post-war slabs with humps, original plumbing that’s been patched repeatedly, and kitchens that haven’t been touched since the Nixon administration. Same city, same trade, very different bid a mile apart from our CWS repair in Fountain Valley. We bid accordingly, with line-item allowances for the shimming, the leveling, and the plan-check fees those Westside jobs always seem to generate.
CWS Models & Products We Service in Costa Mesa
We service and install the full CWS lineup that shows up in Costa Mesa kitchens, plus CWS service in Huntington Beach: Ready-to-Assemble shaker cabinet lines, semi-custom all-plywood painted cabinet series, quartz and laminate countertop bundles, and soft-close drawer and door hardware sets. Our parts approach is simple. Where the box is structurally sound, we use CWS OEM hinges, drawer glides, and touch-up finish. When the OEM line is discontinued, we switch to quality aftermarket soft-close hardware that outperforms the original. Blunt truth on anything 30-plus years old with water damage at the base: refacing means throwing money at swollen board. We push for replacement and don’t apologize for it.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Costa Mesa
Costa Mesa CWS work prices land based on what’s actually behind the drywall and under the cabinets. A simple reface on a 92626 tract kitchen runs differently than a full-gut Westside bungalow kitchen with legalization attached. Here’s where our bids usually land:
| CWS Service | Typical Costa Mesa Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
Every estimate is free and written line-by-line. We price the job before we start, and the number doesn’t move unless the scope changes in writing. Call (855) 473-5620 for an exact quote on your Costa Mesa CWS project.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well, including San Joaquin Hills CWS service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Costa Mesa
No. We’re an independent CWS service provider, not authorized by or affiliated with the manufacturer. That independence means we can recommend repair over replacement when repair makes sense, and we can tell you honestly when a CWS box is beyond saving without worrying about a dealership contract telling us to push new product.
Yes, if the finish isn’t prepped properly. Costa Mesa’s marine layer and salt air on the 92627 side hit painted CWS doors hard, especially near windows. We strip, prime with a bonding primer made for coastal exposure, and use a cabinet-grade topcoat that holds up. The factory finish on new CWS painted doors isn’t always enough. We add the right prep before installation day, not after the peeling starts. Call (855) 473-5620 to discuss what your east-side kitchen needs.
Most cabinet-only installs run two to three days. Refacing runs three to five. A full kitchen remodel with countertops, backsplash, and permits runs six to ten weeks depending on what we find behind the walls. Westside bungalows with unpermitted additions add plan-check time we can’t compress, but we build that into the schedule up front.
We handle CWS Ready-to-Assemble shaker lines, semi-custom all-plywood painted series, quartz and laminate countertop bundles, and the soft-close hardware sets that come with them. If your CWS cabinets predate the RTA era and you’re not sure of the line, we’ll identify it on-site and source the correct OEM or aftermarket parts.
Door sag repair with new hinges and reinforcement typically lands in the $400 to $1,800 range depending on how many doors are affected. Swollen sink bases usually mean replacing the sink base cabinet entirely, which runs $800 to $3,000 for the box, installation, and hardware. If the water damage spread into adjacent boxes, the fix creeps toward a small kitchen remodel at $9,000 to $20,000. Call (855) 473-5620 for an exact number, estimates are free.
Service Areas Near Costa Mesa
Our CWS service coverage extends beyond Costa Mesa into the surrounding Orange County and Inland Empire areas when projects call for it. We regularly run CWS kitchen work in CWS service in Laguna Beach, where coastal exposure keeps us on our toes with finish durability, and CWS service in Newport Beach, where older beach cottages hide the same unpermitted-addition surprises we see on the Costa Mesa Westside. For clients in the Inland Empire, we cover Fontana, Bloomington, Rialto, and the surrounding neighborhoods with the same independent-service approach.
Book Your CWS Service in Costa Mesa Today
If your CWS cabinets are sagging, your sink base is swelling, or you’re planning a full kitchen remodel in Costa Mesa, call (855) 473-5620 for a free, written estimate. We’ll measure, inspect, and give you straight answers about what’s worth repairing and what’s worth replacing.
Written by Ruben Castillo, Owner at San Bernardino Contractors, our General Contractor in Costa Mesa serving the surrounding communities.