Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Stanton, CA | San Bernardino Contractors
San Bernardino Contractors provides independent Mr-Glass service across Stanton, CA (90680) – we install, repair, and replace frameless shower enclosures, pivot doors, bi-pass tub/shower systems, and interior glass railing assemblies. What makes our Mr-Glass work here different is the lot reality: nearly every Stanton job is a remodel or conversion on a shallow 1950s tract lot where stock-size glass panels don’t always fit the opening. Call (855) 473-5620 to schedule a free estimate, and we’ll measure, template, and quote your Mr-Glass project straight.
Why Stanton Residents Choose Us for Mr-Glass Service
We’ve spent the better part of two decades working Orange County infill remodels – the kind Stanton has in spades. That’s the difference. A crew that only does new construction doesn’t know what happens when a 1958 bathroom alcove measures 59 and a quarter inches instead of 60. We do, because we’ve pulled the cast-iron tubs out of those walls. Ruben Castillo, our owner, cut his teeth on framing and remodels in the Inland Empire and Orange County, and he’s the first to say: on these older tract homes, the tape measure tells the truth, not the blueprint.
We’re not authorized or sponsored by Mr-Glass – we’re an independent contractor. That independence means we tell you when a $90 roller refresh fixes the door and when you’re better off replacing the whole enclosure. On Mr-Glass sales & service, we lean OEM parts so fit and finish stay true, but we’ll be straight with you when an aftermarket stainless replacement is the smarter money.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Stanton
These are the ones we see over and over on Stanton tract homes and mobile-home park properties. If your Mr-Glass enclosure is doing any of these, call us—our Westminster Mr-Glass service team handles these too—most are fixable without a full replacement.
- Roller and pivot hardware seizing or corroding. Stanton’s dry summers followed by bathroom humidity spikes are rough on Mr-Glass barn-door style roller assemblies. The metal fatigues, the rollers skip the track, and the door chips its bottom edge against the tile curb. We rebuild the roller hardware with OEM Mr-Glass replacement parts when available, and we check the curb clearance so the glass isn’t dragging.
- Silicone and sweep-seal breakdown. UV exposure in inland Orange County yellows and shrinks cheaper silicone faster than coastal climates do. On a Mr-Glass frameless enclosure, that means the bottom sweep lifts and water weeps onto a 1950s subfloor that’s probably original tongue-and-groove – not something you want soaking. We re-seal with UV-stable silicone and replace the sweeps, then test the water line.
- Out-of-plumb walls and curbs forcing re-templating. Older Stanton tract homes settled long before anyone thought about frameless glass tolerances. A wall off by half an inch means a factory-cut Mr-Glass panel won’t sit square without shimming. We re-template the opening, shim the frame, and only then set the glass – no forcing a panel into a wall it doesn’t fit.
- Tempered glass edge chipping and stress cracks. Shallow infill lots in Stanton shift during dry-season soil movement. If an enclosure was installed without proper expansion clearance, the glass carries that stress and eventually chips or cracks at the edge. We inspect the installation gap and correct it so the panel isn’t sitting hard against framing.
- Stock-size Mr-Glass panels that don’t fit 5-foot alcoves. Stanton’s tub-to-shower conversions often run into alcoves that measure just under 60 inches. A stock-size unit won’t work. We ship custom-cut Mr-Glass panels to fit the actual opening – because the old tract-home walls don’t care what the catalog says.
Mr-Glass Service in Stanton: What Local Conditions Mean for Your Equipment
Here’s the thing about Stanton that gets missed on a generic Mr-Glass page: this city packs about 37,000 people into roughly 3.1 square miles, and the housing stock is overwhelmingly one-story post-WWII stucco-and-shake singles plus a large mobile-home park inventory. That means almost none of the Mr-Glass work we do here is new construction. It’s tub-to-shower conversions inside shallow 5-foot alcoves, garage-conversion ADUs with rear bathrooms, and master-bath re-glazes where the original framing from the Eisenhower era is still carrying the load. A contractor from a newer inland city—or even one handling Mr-Glass in Cypress—might never think about a party wall setback or an out-of-plumb curb because their jobs are on 1990s lots with deeper rooms. In Stanton, the shallow-alcove reality is the job – and your Mr-Glass enclosure has to be templated for the wall you actually have, not the wall the plan calls for. We’ve measured enough Beach Boulevard-era tract homes to know the difference.
Mr-Glass Models & Products We Service in Stanton
We install and repair the full range of Mr-Glass residential systems, including frameless sliding shower door systems with barn-door style rollers, pivot frameless shower enclosures, semi-frameless bi-pass tub/shower doors, and interior glass railing and panel systems. On the parts side, we keep a rolling local stock of OEM Mr-Glass rollers, pivots, hinges, and sweeps for fast Stanton turnaround, and we always quote a hardware refresh on a sound enclosure before recommending a full replacement. If the glass itself is chipped or the frame is wallowed out past the point of a shim, we’ll tell you plainly and show you the options. No upsell, no drama.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Stanton
What you’ll pay for Mr-Glass service in Stanton depends heavily on whether we’re refreshing hardware or pulling out an old tub and rebuilding the alcove. A hardware refresh on a Mr-Glass slider typically runs a few hundred dollars. A full tub-to-shower conversion with a custom-cut Mr-Glass enclosure lands in the range below, and Stanton’s shallow-alcove 1950s tract homes tend to fall toward the middle because we’re doing structural shimming and re-templating, not a drop-in swap.
| Project | Stanton Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Your free estimate includes a site visit, measurements, templating notes, and a written line-item quote. We don’t change the price once work starts without a written change order, and we pull permits on every Stanton job that requires one. Call (855) 473-5620 for an exact quote.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and also serve Mr-Glass in Garden Grove, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Stanton
Yes. Stanton’s warm, dry inland summers and strong UV exposure accelerate silicone yellowing and shrinkage faster than coastal Orange County weather. The bottom sweep on a frameless Mr-Glass door will eventually lift and let water past the curb. We re-seal with UV-stable silicone and set the sweep height for your specific curb profile – and we recommend checking the seal line once a year, around late summer, when the worst of the UV has done its work. If you’re seeing water outside the enclosure after a shower, call (855) 473-5620 and we’ll take a look.
No. We’re an independent contractor, not a Mr-Glass subsidiary, dealer, or warranty-backed installer. That matters because we can be honest about what’s holding up and what isn’t. We use OEM Mr-Glass parts whenever they’re available, but we’re not bound to push a replacement when a roller refresh is the smarter fix.
OEM first, always – that means Mr-Glass rollers, pivots, hinges, and sweeps so the fit and finish stay true to the original. When a part is discontinued or backordered, we source quality aftermarket stainless hardware and tell you plainly that it’s aftermarket before we install it.
Most Stanton tub-to-shower conversions run three to five working days, about the same as Mr-Glass in Midway City, depending on whether we’re just re-templating and setting glass or tearing out cast iron, reframing the alcove, and moving plumbing. The shallow 5-foot alcoves on many 1950s tract homes here usually add a day for custom-cut glass versus dropping in a stock unit.
Expect $3,500 to $10,000 for a tub-to-shower conversion with a Mr-Glass enclosure in Stanton. The range depends on whether we’re rebuilding the alcove framing, moving the drain, or just re-templating an existing opening. Older tract homes with out-of-plumb walls tend to land in the middle of that range because we’re doing structural work, not a cosmetic swap. Call (855) 473-5620 and we’ll measure it out for a fixed number.
Service Areas Near Stanton
If you’re in a neighboring city, we cover the same territory across Orange County and the Inland Empire. Take a look at our Mr-Glass service in Ladera Ranch or our Mr-Glass service in La Palma for local details in those areas. We also serve Fontana, Bloomington, Rialto, Sunnyslope, Glen Avon, and Muscoy – and the full Stanton service area for other home construction work beyond glass.
Book Your Mr-Glass Service in Stanton Today
If your Mr-Glass enclosure is leaking, skipping the track, or just needs a hardware refresh, call Ruben and the crew at (855) 473-5620 to schedule your free estimate in Stanton. We’ll measure, level, template, and quote – and we’ll tell you straight if the door is worth saving. If it’s not built right the first time, you’re just paying for it twice.
Written by Ruben Castillo, Owner at San Bernardino Contractors, serving Stanton and the surrounding Orange County area.